want to install tank where spare tire was - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jacquesdean · 12-07-2003, 08:57 PM

I'd like to install a tank where the spare tire holder is between the frame rails. If you've done this. What did you use and any help would be appreciated. I've heard that s10 tanks have been used.

Thanks Guys.

kaycee · 12-07-2003, 09:23 PM

All the ones I looked at were to wide I belive alot of the people go with the aftermarket tank and set-up.They go for about $250 give or take a few $ and you pretty much get everything tank,strap's,sender unit etc.

jacquesdean · 12-07-2003, 10:51 PM

who makes these after market tanks

gr8scott51 · 12-07-2003, 11:31 PM

Probably any of the venders listed on the front page can get one for you. I know No Limit Engineering and Early Classic Enterprises has 'em - pickmup and WES, too, local to me. Lots of threads on the subject - try a search on blazer tank. Some discussion on whether the poly (plastic) tank holds up as well as the metal one. I have not done this yet, it's on my wish list, too. Good luck, scott

D-Money · 12-07-2003, 11:58 PM

I put a plastic tank on my truck and it was really easy to do. The only hard part was removing the cross bar thats in the way. I am having an aluminum tank custom made that goes under there because I didn't like the way the plastic tank holds up under the heat of the desert. Would highly recommend getting one just make sure it is metal if you are anywhere hot.

slogo · 12-08-2003, 12:02 AM

The Truck Shop, i got one just this summer from them for $150.00 but that was a show price. complete kit and it was a metal tank

jmanz69 · 12-08-2003, 12:11 AM

A member, FuelCellGuy will custom make them also. He has two different sizes that will fit right between the crossmembers that are there. They look nice too. Can't remember what he charges though. If you search for his name, you can PM him asn ask about one.

*rickspickuppart* · 12-08-2003, 12:15 AM

I have them on the "board Members" specials page for 175.00

specials

Shawn

D-Money · 12-08-2003, 12:19 AM

Quote:

Originally posted by rickspickuppart
I have them on the "board Members" specials page for 175.00

specials

Shawn

I second that! This is where I got my tank. They now have metal tanks!

A.P. · 12-08-2003, 07:03 AM

jorgensensc shows very good details on the tank swap.

http://67-72chevytrucks.com/vboard/s...threadid=74876

cag17 · 12-08-2003, 09:14 AM

I am in the process of doing this now. I used a Stainless reman tank that I bought from Tim Christian and it fits beautifully. The only thing that you have to decide is where to bring the filler to. I am trying to bring mine through the marker light because I do not have a wood bed yet. You can also bring it out of the taillight but it is a little tighter area. I'll send pics of the tank and the finished product if you wish.

70ChevyLongbed · 12-08-2003, 03:27 PM

Cag17,

I'd love to see it finished. I want to do this too, but I am looking for side filler options like you are going for.

I'm also glad to find that Tim has them, I'm making a list!

Mixup · 12-08-2003, 04:49 PM

I agree with D-money. If you live in a hot climate don't use plastic. Mine is all distorted from the heat. Go with metal.

cag17 · 12-08-2003, 10:43 PM

They have just come out with this tank and it is perfect for my application. I have painted it black so it will be hard to tell detail but I'll post as soon as I can. I only have a rolling chasis right now but I'll keep you guys posted.

71swb4x4 · 12-08-2003, 10:50 PM

If you haven't checked it out yet check out Jorgensensc's side marker filler install

http://67-72chevytrucks.com/vboard/s...threadid=77104

FuelCellGuy · 12-08-2003, 10:51 PM

here a solution.

cag17 · 12-08-2003, 11:08 PM

I looked at the thread on the side marker and like his ideas but I am doing a little more drastic. I am adding to the post on the inside of the bed so that the filler neck can't be seen under the truck. I will be using mirrors at the shows and do not want this exposed.

jacquesdean · 12-09-2003, 02:06 AM

Thank you so much for sharing your info to me and other members, I greatly appreciate it.

Thanks again,

cag17 · 12-14-2003, 12:16 PM

Okay guys, here are the pics that a few of you requested.

cag17 · 12-14-2003, 12:17 PM

Pic 2 of 3

cag17 · 12-14-2003, 12:21 PM

pic 3 of 3

PanelDeland · 12-14-2003, 01:18 PM

One of the vendors also has the sidemarker fuel filler "Tennman" did on his 4X4.It looks sharp and works very well.

cag17 · 12-14-2003, 02:40 PM

I have looked at Tennman's and love it. I wasn't able to talk to him though. Did he buy the filler neck or did it come from a yard.

12-07-2003, 08:57 PM	#1
jacquesdean Registered User Join Date: Jan 2003 Location: Snead, Alabama Posts: 399	want to install tank where spare tire was I'd like to install a tank where the spare tire holder is between the frame rails. If you've done this. What did you use and any help would be appreciated. I've heard that s10 tanks have been used. Thanks Guys. __________________ Jock, Powder blasting shop, Alabama

12-07-2003, 09:23 PM	#2
kaycee Registered User Join Date: Jan 2000 Location: Wyoming USA Posts: 2,446	Nope All the ones I looked at were to wide I belive alot of the people go with the aftermarket tank and set-up.They go for about $250 give or take a few $ and you pretty much get everything tank,strap's,sender unit etc. __________________ 2001 Silverado K-1500 2005 FXDWG stage3 69 CHEVY Short/Step 327/4L60 373 posi 63 IMPALA 327

12-07-2003, 10:51 PM	#3
jacquesdean Registered User Join Date: Jan 2003 Location: Snead, Alabama Posts: 399	re: tank who makes these after market tanks __________________ Jock, Powder blasting shop, Alabama

12-07-2003, 11:31 PM	#4
gr8scott51 Registered User Join Date: Mar 2003 Location: Bremerton, WA Posts: 1,839	blazer tank Probably any of the venders listed on the front page can get one for you. I know No Limit Engineering and Early Classic Enterprises has 'em - pickmup and WES, too, local to me. Lots of threads on the subject - try a search on blazer tank. Some discussion on whether the poly (plastic) tank holds up as well as the metal one. I have not done this yet, it's on my wish list, too. Good luck, scott __________________ Silence is golden, duct tape is silver. - Scott

12-07-2003, 11:58 PM	#5
D-Money Registered User Join Date: Dec 2003 Location: CA Posts: 315	I put a plastic tank on my truck and it was really easy to do. The only hard part was removing the cross bar thats in the way. I am having an aluminum tank custom made that goes under there because I didn't like the way the plastic tank holds up under the heat of the desert. Would highly recommend getting one just make sure it is metal if you are anywhere hot. __________________ 1969 Chevy SB Truck under construction hopefully will be done early next year! Will be posting pics soon.

12-08-2003, 12:02 AM	#6
slogo Registered User Join Date: Mar 2003 Location: Morristown,TN Posts: 482	The Truck Shop, i got one just this summer from them for $150.00 but that was a show price. complete kit and it was a metal tank

12-08-2003, 12:11 AM	#7
jmanz69 Careful, they attack... Join Date: Aug 2001 Location: Waterford, MI, USA Posts: 1,107	A member, FuelCellGuy will custom make them also. He has two different sizes that will fit right between the crossmembers that are there. They look nice too. Can't remember what he charges though. If you search for his name, you can PM him asn ask about one.

12-08-2003, 12:15 AM	#8
rickspickuppart Account Suspended Join Date: Jul 2003 Posts: 1,284	fuel tank I have them on the "board Members" specials page for 175.00 specials Shawn

12-08-2003, 07:03 AM	#10
A.P. Black 72 Chevy Join Date: May 2002 Location: Los Angeles, California Posts: 662	jorgensensc shows very good details on the tank swap. http://67-72chevytrucks.com/vboard/s...threadid=74876

12-08-2003, 09:14 AM	#11
cag17 Registered User Join Date: Jul 2002 Location: North Carolina Posts: 140	I am in the process of doing this now. I used a Stainless reman tank that I bought from Tim Christian and it fits beautifully. The only thing that you have to decide is where to bring the filler to. I am trying to bring mine through the marker light because I do not have a wood bed yet. You can also bring it out of the taillight but it is a little tighter area. I'll send pics of the tank and the finished product if you wish. __________________ Bowtie Club of the Carolinas

12-08-2003, 03:27 PM	#12
70ChevyLongbed Howzit?!? Join Date: Jan 2003 Location: Maryville, TN Posts: 1,266	Cag17, I'd love to see it finished. I want to do this too, but I am looking for side filler options like you are going for. I'm also glad to find that Tim has them, I'm making a list! __________________ Jason Hawaiian-J 70 Longbed, 307, Edelbrock Carb 1404, Edelbrock Intake 2101, Dual Roller Timing chain and gears, 214/214 cam, Comp Roller Rockers, dual Flowmasters. 1999 Chevy Tahoe 2004 Mini Cooper S 71 BMW 2002 - Sold

12-08-2003, 04:49 PM	#13
Mixup Registered User Join Date: Jan 2002 Location: Henderson, NV Posts: 358	I agree with D-money. If you live in a hot climate don't use plastic. Mine is all distorted from the heat. Go with metal. __________________ 1980 Chevy Shortbed Pickup 1969 Z28 engine Turbo 350

12-08-2003, 10:43 PM	#14
cag17 Registered User Join Date: Jul 2002 Location: North Carolina Posts: 140	They have just come out with this tank and it is perfect for my application. I have painted it black so it will be hard to tell detail but I'll post as soon as I can. I only have a rolling chasis right now but I'll keep you guys posted. __________________ Bowtie Club of the Carolinas

12-08-2003, 10:50 PM	#15
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	If you haven't checked it out yet check out Jorgensensc's side marker filler install http://67-72chevytrucks.com/vboard/s...threadid=77104 __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

12-08-2003, 10:51 PM	#16
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Filler option.... here a solution. Attached Images



Register or Log In To remove these advertisements.

12-08-2003, 11:08 PM	#17
cag17 Registered User Join Date: Jul 2002 Location: North Carolina Posts: 140	I looked at the thread on the side marker and like his ideas but I am doing a little more drastic. I am adding to the post on the inside of the bed so that the filler neck can't be seen under the truck. I will be using mirrors at the shows and do not want this exposed. __________________ Bowtie Club of the Carolinas

12-09-2003, 02:06 AM	#18
jacquesdean Registered User Join Date: Jan 2003 Location: Snead, Alabama Posts: 399	tank installation Thank you so much for sharing your info to me and other members, I greatly appreciate it. Thanks again, __________________ Jock, Powder blasting shop, Alabama

12-14-2003, 12:16 PM	#19
cag17 Registered User Join Date: Jul 2002 Location: North Carolina Posts: 140	Okay guys, here are the pics that a few of you requested. Attached Images __________________ Bowtie Club of the Carolinas

12-14-2003, 12:17 PM	#20
cag17 Registered User Join Date: Jul 2002 Location: North Carolina Posts: 140	Pic 2 of 3 Attached Images __________________ Bowtie Club of the Carolinas

12-14-2003, 12:21 PM	#21
cag17 Registered User Join Date: Jul 2002 Location: North Carolina Posts: 140	pic 3 of 3 Attached Images __________________ Bowtie Club of the Carolinas

12-14-2003, 01:18 PM	#22
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	One of the vendors also has the sidemarker fuel filler "Tennman" did on his 4X4.It looks sharp and works very well. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

12-14-2003, 02:40 PM	#23
cag17 Registered User Join Date: Jul 2002 Location: North Carolina Posts: 140	I have looked at Tennman's and love it. I wasn't able to talk to him though. Did he buy the filler neck or did it come from a yard. __________________ Bowtie Club of the Carolinas

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.