Project Black Out, 1981 stepside... need help planing

[kserieskid]

hey thanks crashz!
its nice to hear from people in the area!!

well after looking at the axles quickly today im almost sure they are bolth 10 bolts the covers are identical

sweet so the spindles will swap over umm do you think the axle shafts are the same in bolth axels, what im trying to get away with is not having to buy two sets of gears, the 87 3/4 ton has 4:11s witch is awful for the driving that I do so my plan was to either keep the carrier in the ten bolt or take the ring and pinion from the half ton front end and swap it over to the 3/4 front end and just buy the gear set for the rear, I do know the 3/4 ton shafts and 1/2 ton shafts take the same ujoint (moog 377) I work at a parts store so I get to play on the computer some times


here is some progress pictures
had to rewire the dome light from the fuse box all the way back it had a clock patched in to it some how and it melted the wires the entire length.
and I also re wired my 4 pin round/ 7 pin flat hook up and put the led tail lights I had off my 87 flat bed on