The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-27-2013, 04:08 PM   #1
Lakerjay
Registered User
 
Join Date: Nov 2013
Location: Northwest Iowa
Posts: 13
1987 1/2 ton Truck 4WD Power Window and Lock Problem

First post here as I just found my truck in February and am starting to tackle some small projects on it. The project I am on now are the power windows and door locks. The Passenger side window works but is very very slow and the drivers side will only work in very short increments - for example I can lower it about 1.5 inches and then have to wait a while before I can lower more or raise back up. I did order some new motors but not sure if I jumped the gun. I can return if needed. I also am not sure if it might be the regulator or something else?

And about my power door locks - I have accidentally pushed down on the door lock inside the truck and at times the switches wont unlock or it may take a few times or so to get them to work.

Thanks in advance for your help.

I also posted a picture of my truck - just put some 33 x 10.5 x 15 BFGs
Lakerjay is offline   Reply With Quote
Old 11-27-2013, 04:09 PM   #2
Lakerjay
Registered User
 
Join Date: Nov 2013
Location: Northwest Iowa
Posts: 13
Re: 1987 1/2 ton Truck 4WD Power Window and Lock Problem

Here's the picture
Attached Images
 
Lakerjay is offline   Reply With Quote
Old 11-27-2013, 06:17 PM   #3
Lakerjay
Registered User
 
Join Date: Nov 2013
Location: Northwest Iowa
Posts: 13
Re: 1987 1/2 ton Truck 4WD Power Window and Lock Problem

Any help in leading me to the correct way to diagnose the problem and how to fix I would appreciate it. Thanks!
Lakerjay is offline   Reply With Quote
Old 11-27-2013, 06:31 PM   #4
v30crewcab
Registered User
 
v30crewcab's Avatar
 
Join Date: Apr 2012
Location: Chatt Tn
Posts: 982
Re: 1987 1/2 ton Truck 4WD Power Window and Lock Problem

got the same problem on a buddys crewcab here. SLOOOOOOW windows. seems to have gummy grease on the gear mechanism. not sure what to do other than take the window motors out and clean it all out and regrease. anyone else got other ideas?
__________________
88 military v30 crewcab shortbed 5.9 cummins, nv4500, 205
86 k30, 89 diesel burb, 76 gmc pathfinder
71 longbed 5.3 4l80
http://67-72chevytrucks.com/vboard/s...d.php?t=522535
v30crewcab is offline   Reply With Quote
Old 11-27-2013, 06:36 PM   #5
Malo83
Cruzzzn' Vet
 
Malo83's Avatar
 
Join Date: Jan 2005
Location: Porterville,Ca.
Posts: 1,918
Re: 1987 1/2 ton Truck 4WD Power Window and Lock Problem

I had the same problems with my 83, slow windows and driver power door lock hangs up, I replaced the power motors and regulators on both doors, they were the originals and they were pretty wore out, not too hard to do, just take your time, after doing mine they work like new, fast up and down, while you have the door opened up it's easy to get to the door locks, tighten everything up and will work as advertised
Malo83 is offline   Reply With Quote
Old 11-27-2013, 06:41 PM   #6
Lakerjay
Registered User
 
Join Date: Nov 2013
Location: Northwest Iowa
Posts: 13
Re: 1987 1/2 ton Truck 4WD Power Window and Lock Problem

So do you need to replace the regulators as well when replacing the motors?

I did order door lock actuators in case I needed them when I had everything opened up. Any thoughts on replacing these as well? I will probably try tightening everything up like you say and see how it works.
Lakerjay is offline   Reply With Quote
Old 11-27-2013, 07:29 PM   #7
doublearrow
Registered User
 
Join Date: Jan 2010
Location: Midland Texas
Posts: 51
Re: 1987 1/2 ton Truck 4WD Power Window and Lock Problem

I had the same problem with my windows on my 87. After a while the driver door quit alltogether. Replaced just the motors and no problems since.
doublearrow is offline   Reply With Quote
Old 11-27-2013, 11:08 PM   #8
v30crewcab
Registered User
 
v30crewcab's Avatar
 
Join Date: Apr 2012
Location: Chatt Tn
Posts: 982
Re: 1987 1/2 ton Truck 4WD Power Window and Lock Problem

my buddys truck is supposed to have new motors and its still not working right.
__________________
88 military v30 crewcab shortbed 5.9 cummins, nv4500, 205
86 k30, 89 diesel burb, 76 gmc pathfinder
71 longbed 5.3 4l80
http://67-72chevytrucks.com/vboard/s...d.php?t=522535
v30crewcab is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:06 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com