The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.
Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > LSx Classifieds
Reload this Page Cam/valvesprings/pushrods

Web 67-72chevytrucks.com
Home Forums Gallery Site Merchandise Register FAQ Members List Subscribe Calendar Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 12-09-2013, 10:10 AM   #1
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
Cam/valvesprings/pushrods
I've got a cam/valve springs and keepers/valve seals/pushrods from a 2013 Camaro SS with only 135 miles. $150
Last edited by Hart_Rod; 12-19-2013 at 03:23 PM.
Hart_Rod is offline   Reply With Quote
Old 12-16-2013, 01:20 PM   #2
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
Re: Cam/valvesprings/pushrods
$150? These are brand new parts!
Hart_Rod is offline   Reply With Quote
Old 12-16-2013, 02:00 PM   #3
Jmiller022
Registered User
 
Jmiller022's Avatar
 
Join Date: Apr 2013
Location: Douglasville, Ga
Posts: 212
Re: Cam/valvesprings/pushrods
specs? length of push rods?
__________________
68' c10 stepper 5.3/4L60e

Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=578917
Jmiller022 is offline   Reply With Quote
Old 12-16-2013, 02:16 PM   #4
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
Re: Cam/valvesprings/pushrods
Quote:
Originally Posted by Jmiller022 View Post
specs? length of push rods?
JMILL - this is what I found on line:

http://www.camaro5.com/forums/showthread.php?t=34774
Hart_Rod is offline   Reply With Quote
Old 12-17-2013, 04:34 PM   #5
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
Re: Cam/valvesprings/pushrods
Quote:
Originally Posted by Jmiller022 View Post
specs? length of push rods?
L99 Lift specs
Camshaft Lobe Lift - Exhaust - Non Active Fuel Management Cylinders
7.48 mm
0.294 in

Camshaft Lobe Lift - Exhaust - Active Fuel Management Cylinders
7.61 mm
0.300 in

Camshaft Lobe Lift - Intake - Non Active Fuel Management Cylinders
7.48 mm
0.294 in

Camshaft Lobe Lift - Intake - Active Fuel Management Cylinders
7.61 mm
0.300 in

7.4 pushrods
Hart_Rod is offline   Reply With Quote
Old 12-20-2013, 10:16 AM   #6
Ford Assassin
Registered User
 
Ford Assassin's Avatar
 
Join Date: Jun 2008
Location: Jackson, Ca.
Posts: 674
Re: Cam/valvesprings/pushrods
It sucks, but the cam itself is pretty much worthless because it is a single bolt cam and the fact its AFM/DoD cam. Not something really worth swapping into another stock engine as an upgrade, plus it would require a GEN IV timing cover if attempting to use on a GEN III engine.

The springs are a decent enough for a mild aftermarket cam up to 0.570" lift or so.
__________________
Cable

-K5 Blazer 2wd: 6.0 LQ4, 7875 Turbo, Tick Stage II Turbo Cam, Built 4L80e, RevMax Billet 3600, 9.5" 14 Bolt
-Chevy 3+3 Crew Cab Dually: Cummins 12v P-Pump Swap, Compound Turbos, A2W Intercooler, NV4500HD, 4wd conversion, Radius Arms, Coilovers, Crossover Steering, etc
Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=803608
Ford Assassin is offline   Reply With Quote
Reply

Bookmarks

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 12:36 PM.

67-72chevytrucks.com - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com