67 69

[low&slow]

Would any happen to have pictures of a 67 core support and a 69 core support. I got a lot of details on my other thread about the differences, but I'd like to actually see the differences between the two so I can figure out how I could use a 69 core support for a mock up with 67 fenders.

Also, does anyone have a measurement of the distance between the inside of the fenders from end to end of the core support for a 67?
That way I can make a cross bar and tack it to the fenders if I can't get my core to work. This might be an easier way to do it since I won't be running a core support.

[54belair]

The differences between them shouldnt make a difference in mock up.

The only differences (that Ive found) are the headlight buckets and the 5 weld nuts along the bottom (on the 67) for the splash pan to attach.

I used a 69-70 core, modified the buckets and added the weldnuts for my 68. I posted a thread in the projects/builds titled: using 70 core support in a 68

[low&slow]

Thanks I'll defiantly check that out.