|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-08-2014, 09:36 PM
|
#1 |
|
Registered User
Join Date: Oct 2013
Location: St. Clair Mo
Posts: 283
|
'53 216 Fuel Line Diameter
The fuel line on my '53 with a 216 in it has the ends rusted to the line so the line twisted off when I went to replace the fuel pump. I have a small tubing bender that I used to bend the brake lines for my '68 GTO. My question is, what is the diameter of the steel line that I need? I can bend, cut, and flare it to my specific needs. 1/4"? I would just use the old line for comparison but it's out at my dad's with the truck and that's about 10 miles out of town so I'd have to drive out there, then back to town, then back out there, which would be too much driving.
|
|
|
|
01-09-2014, 12:28 AM
|
#2 |
|
Registered User
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,705
|
Re: '53 216 Fuel Line Diameter
The stock lines should be 5/16.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
01-09-2014, 12:50 AM
|
#3 |
|
Registered User
Join Date: Oct 2013
Location: St. Clair Mo
Posts: 283
|
Re: '53 216 Fuel Line Diameter
Awesome. Thank you.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
