Glove box pull handle factory option?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RockTonka · 01-07-2014, 10:10 PM

My boy was searching a couple bone yards and came across this pull handle on a custom cab 64-66 glove box. I don't recall ever seeing one, and this looks like it's always been there and could be stock. He grabbed it and a number of other cool parts

!! The handle is going on our burb either way, but is it a stock piece??

RockTonka · 01-07-2014, 10:24 PM

Alright, we're answering our own question!

Googled a barely discernable number off the back and low and behold it's a Ajax cabinet door handle!! Looks pretty good though on the glove box

I might still reuse it on the burb, but would have been cooler if it was a stock part

**MisterC** · 01-07-2014, 11:22 PM

I love it! I might have to steal that one. I bet it makes a nice forefinger balance point for pushing the button.

pimpston65 · 01-08-2014, 01:19 AM

if that were an option, well im sure it would be the find of the decade, cuz i've never seen one, but it does make a cool piece. the gloveboxes are a &itch to open. so ima steal that idea also, but ima glue mine on so's i dont damage my door hehe. thanks for the cool pic. tell your son good eye for detail...

pimpston65 · 01-08-2014, 01:22 AM

hell looking at that pic, you guys should have took the A/C unit as well and all the knobs. them oem units are pricy

1966burb · 01-08-2014, 01:52 AM

Same door pull that I have on all the cupboards in my 1959 Shasta travel trailer. Jim

RockTonka · 01-08-2014, 05:38 AM

Quote:

Originally Posted by pimpston65

hell looking at that pic, you guys should have took the A/C unit as well and all the knobs. them oem units are pricy

Quote:

Originally Posted by RockTonka

He grabbed it and a number of other cool parts

!!

^^^^ He didn't miss that

RockTonka · 01-08-2014, 05:41 AM

Quote:

Originally Posted by 1966burb

Same door pull that I have on all the cupboards in my 1959 Shasta travel trailer. Jim

Patented in 58

, at least its in the right era...

RockTonka · 01-08-2014, 05:45 AM

Quote:

Originally Posted by Woogeroo

unless you are doing a stock resto..

-W

Way past that point

, I do think I'm going to use it though...always thought it was a lacking some kind of handle.

pimpston65 · 01-08-2014, 10:29 AM

just when i know all the parts i needed, you go and show me this. wonder were i can snag one? any ideas? i may just go to home depot but i want and old one not some new crap!!! NOS cabinet handle, i really am crazy bout this truck.

oklahomaduner · 01-09-2014, 03:05 AM

Quote:

Originally Posted by pimpston65

just when i know all the parts i needed, you go and show me this. wonder were i can snag one? any ideas? i may just go to home depot but i want and old one not some new crap!!! NOS cabinet handle, i really am crazy bout this truck.

Just saw these on ebay...

http://www.ebay.com/itm/Vintage-NOS-...item2c6cb97fb4

http://www.ebay.com/itm/Vintage-Lot-...item232ab71d2d

http://www.ebay.com/itm/5-Vintage-CO...item2ecab10342

pimpston65 · 01-09-2014, 03:55 AM

i only need one, dont they know its for a truck not a house. hehe thanks for the lead. copper? really!!!

**argonaut** · 01-09-2014, 04:00 AM

They seem a bit pricey for ****ty old drawer handles...what is this world coming to? Please, nobody pay that much for those!

pimpston65 · 01-09-2014, 04:05 AM

too late, ima pay a fin for one. no more the that, its kinda cool

01-07-2014, 10:10 PM	#1
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,524	Glove box pull handle factory option?? My boy was searching a couple bone yards and came across this pull handle on a custom cab 64-66 glove box. I don't recall ever seeing one, and this looks like it's always been there and could be stock. He grabbed it and a number of other cool parts !! The handle is going on our burb either way, but is it a stock piece?? Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

01-07-2014, 10:24 PM	#2
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,524	Re: Glove box pull handle factory option?? Alright, we're answering our own question! Googled a barely discernable number off the back and low and behold it's a Ajax cabinet door handle!! Looks pretty good though on the glove box I might still reuse it on the burb, but would have been cooler if it was a stock part Attached Images __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

01-07-2014, 11:22 PM	#3
MisterC Senior Member Join Date: Sep 2011 Location: Hanford, CA Posts: 1,027	Re: Glove box pull handle factory option?? I love it! I might have to steal that one. I bet it makes a nice forefinger balance point for pushing the button. __________________ Poor and content is Rich...and Rich enough! - William Shakespeare 1966 C10 Custom Cab "Luigi" Big Window - SWB Fleetside 350 V-8 - Powerglide My not so much a build thread as a "Slow Progression Thread":http://67-72chevytrucks.com/vboard/s...d.php?t=486894

01-08-2014, 01:19 AM	#4
pimpston65 Registered User Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: Glove box pull handle factory option?? if that were an option, well im sure it would be the find of the decade, cuz i've never seen one, but it does make a cool piece. the gloveboxes are a &itch to open. so ima steal that idea also, but ima glue mine on so's i dont damage my door hehe. thanks for the cool pic. tell your son good eye for detail...

01-08-2014, 01:22 AM	#5
pimpston65 Registered User Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: Glove box pull handle factory option?? hell looking at that pic, you guys should have took the A/C unit as well and all the knobs. them oem units are pricy

01-08-2014, 01:52 AM	#6
1966burb Registered User Join Date: Jul 2013 Location: Maltby WA Posts: 435	Re: Glove box pull handle factory option?? Same door pull that I have on all the cupboards in my 1959 Shasta travel trailer. Jim

01-08-2014, 10:29 AM	#10
pimpston65 Registered User Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: Glove box pull handle factory option?? just when i know all the parts i needed, you go and show me this. wonder were i can snag one? any ideas? i may just go to home depot but i want and old one not some new crap!!! NOS cabinet handle, i really am crazy bout this truck.

01-09-2014, 03:55 AM	#12
pimpston65 Registered User Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: Glove box pull handle factory option?? i only need one, dont they know its for a truck not a house. hehe thanks for the lead. copper? really!!!

01-09-2014, 04:00 AM	#13
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Glove box pull handle factory option?? They seem a bit pricey for ****ty old drawer handles...what is this world coming to? Please, nobody pay that much for those! __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

01-09-2014, 04:05 AM	#14
pimpston65 Registered User Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: Glove box pull handle factory option?? too late, ima pay a fin for one. no more the that, its kinda cool

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.