baggin a 64 long bed - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kev2809** · 08-21-2012, 06:27 AM

looks good...ill be following this one
Posted via Mobile Device

dr69burb · 08-21-2012, 01:36 PM

Quote:

Originally Posted by kev2809

looks good...ill be following this one
Posted via Mobile Device

Thanks kev. I have been watching your burb build for a while too. Cant wait to start on mine. I should have some little updates and pics soon.
Posted via Mobile Device

**kev2809** · 08-21-2012, 06:23 PM

is it the one in the avatar? looks like you already started on it

im about to hit mine hard soon, just had to clear some crap out of the way. i havent touched it in nearly 2 months....

dr69burb · 08-21-2012, 11:43 PM

Haha its a pic a guy photochopped for me.
Posted via Mobile Device

dr69burb · 09-11-2012, 10:10 PM

i havent had much time to work on the truck, but i did get the steering shaft/linkage done.

dr69burb · 09-23-2012, 11:20 PM

well i got a few little things welded up yesterday and then was finally able to push it out of the garage for some pics in the sun. hope to clean up the frame and paint it this week.

coulter · 09-24-2012, 01:09 AM

Nice man!!! Always cool to see a project layed out for the first time
Posted via Mobile Device

sandiego65 · 09-26-2012, 03:04 PM

Looks killer man!!
Posted via Mobile Device

dr69burb · 09-27-2012, 10:16 PM

thanks bro

dr69burb · 10-16-2012, 07:10 PM

i got my truck bed on. it looks like a truck again. i need to square it up and bolt it down. might need a little more trimming.

dr69burb · 10-16-2012, 10:35 PM

trimed and mounted a fender. looks like a truck now.

zippeay · 10-17-2012, 09:54 AM

Very cool! We are both about in the same place on our trucks. Do you have sizes of the Hime joints and universals you used for the steering? I need to do that this week and there aren't many places around here that carry that stuff so I'm probably going to have to order mine. Good work!

zippeay · 10-17-2012, 09:57 AM

Oh, one more thing. Did you notch your frame for the steering? I pancaked my cross member so mine may be a little different. I was just curious how you ran the steering. Thanks dude!

dr69burb · 10-17-2012, 02:16 PM

Quote:

Originally Posted by zippeay

Very cool! We are both about in the same place on our trucks. Do you have sizes of the Hime joints and universals you used for the steering? I need to do that this week and there aren't many places around here that carry that stuff so I'm probably going to have to order mine. Good work!

I really dont know anything about the universals or hime. I scored them from work. Their all heavy duty marine grade stainless. Sorry i couldnt help more. And i didnt need to notch my frame for steering. I think if you only pancaked you xmember 1.5 you should still be ok.
Posted via Mobile Device

zippeay · 10-17-2012, 05:03 PM

Thanks! I guess I will find out this week when I put the steering together.
Posted via Mobile Device

coulter · 06-09-2013, 12:53 PM

any updates man.. its been a while

dr69burb · 06-09-2013, 01:34 PM

No updates. Its been sittin out in the front yard for the last couple months. If been working on a 68 short bed for a friend. But iv been gathering parts and should be back at it soon.

Posted via Mobile Device

Jmorales3181 · 06-09-2013, 06:36 PM

It's cool that your helping your friend with his truck! Wish there were more members around here man! Keep rockin!

Posted via Mobile Device

coulter · 06-11-2013, 07:31 AM

ahh cool deal!!! good to see you are still getting to work on some good ol vintage armerican iron even though it isnt your truck!!!

Bomp · 07-07-2013, 12:31 PM

Subscribed cause I like to see what ya got going on.

michael.castro63! · 01-23-2014, 12:56 AM

She looks good! Gott her laying on her belly nice wish I had the tools and skill! Hope to see it cruisn around sometime man

dr69burb · 01-23-2014, 11:18 AM

Thanks man. I need to get back at it.

sandiego65 · 01-23-2014, 03:43 PM

More pics!

08-21-2012, 06:27 AM	#26
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: baggin a 64 long bed looks good...ill be following this one Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-21-2012, 06:23 PM	#28
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,175	Re: baggin a 64 long bed is it the one in the avatar? looks like you already started on it im about to hit mine hard soon, just had to clear some crap out of the way. i havent touched it in nearly 2 months.... __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-21-2012, 11:43 PM	#29
dr69burb Registered User Join Date: Mar 2012 Location: San Diego CA Posts: 223	Re: baggin a 64 long bed Haha its a pic a guy photochopped for me. Posted via Mobile Device __________________ Baggin 64 lwb project http://67-72chevytrucks.com/vboard/s...d.php?t=537406

09-11-2012, 10:10 PM	#30
dr69burb Registered User Join Date: Mar 2012 Location: San Diego CA Posts: 223	Re: baggin a 64 long bed i havent had much time to work on the truck, but i did get the steering shaft/linkage done. __________________ Baggin 64 lwb project http://67-72chevytrucks.com/vboard/s...d.php?t=537406

09-23-2012, 11:20 PM	#31
dr69burb Registered User Join Date: Mar 2012 Location: San Diego CA Posts: 223	Re: baggin a 64 long bed well i got a few little things welded up yesterday and then was finally able to push it out of the garage for some pics in the sun. hope to clean up the frame and paint it this week. __________________ Baggin 64 lwb project http://67-72chevytrucks.com/vboard/s...d.php?t=537406

09-24-2012, 01:09 AM	#32
coulter Registered User Join Date: Feb 2011 Location: muskogee, ok Posts: 1,091	Re: baggin a 64 long bed Nice man!!! Always cool to see a project layed out for the first time Posted via Mobile Device __________________ bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918

09-26-2012, 03:04 PM	#33
sandiego65 Registered User Join Date: Dec 2011 Location: san diego california Posts: 143	Re: baggin a 64 long bed Looks killer man!! Posted via Mobile Device

09-27-2012, 10:16 PM	#34
dr69burb Registered User Join Date: Mar 2012 Location: San Diego CA Posts: 223	Re: baggin a 64 long bed thanks bro __________________ Baggin 64 lwb project http://67-72chevytrucks.com/vboard/s...d.php?t=537406

10-16-2012, 07:10 PM	#35
dr69burb Registered User Join Date: Mar 2012 Location: San Diego CA Posts: 223	Re: baggin a 64 long bed i got my truck bed on. it looks like a truck again. i need to square it up and bolt it down. might need a little more trimming. __________________ Baggin 64 lwb project http://67-72chevytrucks.com/vboard/s...d.php?t=537406

10-16-2012, 10:35 PM	#36
dr69burb Registered User Join Date: Mar 2012 Location: San Diego CA Posts: 223	Re: baggin a 64 long bed trimed and mounted a fender. looks like a truck now. __________________ Baggin 64 lwb project http://67-72chevytrucks.com/vboard/s...d.php?t=537406

10-17-2012, 09:54 AM	#37
zippeay Registered User Join Date: Mar 2012 Location: Hooper Ut Posts: 466	Re: baggin a 64 long bed Very cool! We are both about in the same place on our trucks. Do you have sizes of the Hime joints and universals you used for the steering? I need to do that this week and there aren't many places around here that carry that stuff so I'm probably going to have to order mine. Good work!

10-17-2012, 09:57 AM	#38
zippeay Registered User Join Date: Mar 2012 Location: Hooper Ut Posts: 466	Re: baggin a 64 long bed Oh, one more thing. Did you notch your frame for the steering? I pancaked my cross member so mine may be a little different. I was just curious how you ran the steering. Thanks dude!

10-17-2012, 05:03 PM	#40
zippeay Registered User Join Date: Mar 2012 Location: Hooper Ut Posts: 466	Re: baggin a 64 long bed Thanks! I guess I will find out this week when I put the steering together. Posted via Mobile Device

06-09-2013, 12:53 PM	#41
coulter Registered User Join Date: Feb 2011 Location: muskogee, ok Posts: 1,091	Re: baggin a 64 long bed any updates man.. its been a while __________________ bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918

06-09-2013, 01:34 PM	#42
dr69burb Registered User Join Date: Mar 2012 Location: San Diego CA Posts: 223	Re: baggin a 64 long bed No updates. Its been sittin out in the front yard for the last couple months. If been working on a 68 short bed for a friend. But iv been gathering parts and should be back at it soon. Posted via Mobile Device __________________ Baggin 64 lwb project http://67-72chevytrucks.com/vboard/s...d.php?t=537406



Register or Log In To remove these advertisements.

06-09-2013, 06:36 PM	#43
Jmorales3181 Registered User Join Date: Aug 2012 Location: Smithfield rhode island Posts: 722	Re: baggin a 64 long bed It's cool that your helping your friend with his truck! Wish there were more members around here man! Keep rockin! Posted via Mobile Device __________________ My frame Layin 63 short bed project http://67-72chevytrucks.com/vboard/s...d.php?t=551353

06-11-2013, 07:31 AM	#44
coulter Registered User Join Date: Feb 2011 Location: muskogee, ok Posts: 1,091	Re: baggin a 64 long bed ahh cool deal!!! good to see you are still getting to work on some good ol vintage armerican iron even though it isnt your truck!!! __________________ bagged 66 longbed build http://67-72chevytrucks.com/vboard/s...d.php?t=449548 my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918

07-07-2013, 12:31 PM	#45
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: baggin a 64 long bed Subscribed cause I like to see what ya got going on.

01-23-2014, 12:56 AM	#46
michael.castro63! Registered User Join Date: Jan 2013 Location: spring valley, California Posts: 48	Re: baggin a 64 long bed She looks good! Gott her laying on her belly nice wish I had the tools and skill! Hope to see it cruisn around sometime man

01-23-2014, 11:18 AM	#47
dr69burb Registered User Join Date: Mar 2012 Location: San Diego CA Posts: 223	Re: baggin a 64 long bed Thanks man. I need to get back at it. __________________ Baggin 64 lwb project http://67-72chevytrucks.com/vboard/s...d.php?t=537406

01-23-2014, 03:43 PM	#48
sandiego65 Registered User Join Date: Dec 2011 Location: san diego california Posts: 143	Re: baggin a 64 long bed More pics!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.