67 master cyl lines

[Mike Wessinger]

I got everything at my local Advance Auto. I do not have power brakes, so your application may be a bit different. I used the master listed for a 1967 truck-Cardone reman Part No. 10-1329. As for the adapters, I just got the kid at the counter to dig up the parts I needed to adapt it down to the 1/4 in line. Since he had the master in front of him, he just dug around until he found the correct adapters to reduce the master ports down to the fitting on the end of the 1/4 in line. The primary was threaded 1/2"X20 and the secondary 9/16"X18.

I got all the info I needed from the threads here indexed in the FAQ.