69 Blazer Hatch rattle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

asolde · 02-09-2014, 03:39 PM

What are you guys doing to fix the hatch from rattleing so much? Drives me nuts.....

1tuff71 · 02-09-2014, 03:46 PM

Are you missing the strip on the tailgate ? Maybe you need to adjust the latch catches.

**DeadheadNM** · 02-09-2014, 04:09 PM

Quote:

Originally Posted by 1tuff71

Are you missing the strip on the tailgate?

x2. My K5 lacked the strip when I bought it and the hatch rattle was quite noticeable. Adding the strip went a long way to reduce the noise. Later I added the missing rubber bumpers (one from you IIRC) and now the hatch is solid with very little noise. What hatch parts might you be missing if any?

asolde · 02-09-2014, 05:56 PM

I don't think I am missing any parts.It must have drove the original owner nuts too because there are make shift pads and rub strips all around the hatch. The hatch is not centered in the opening for one thing. I think there are fore and aft adjustments on the upper hinges but not sure. Here are a few pics.

asolde · 02-09-2014, 05:58 PM

more pics

**DeadheadNM** · 02-09-2014, 06:12 PM

Huh, it does look complete. How's the gasket quality? All the bolts tight? Are the rubber bumpers doing anything or need to be tweaked for better contact with the hatch? Is the tailgate loose or malaligned?

**DeadheadNM** · 02-09-2014, 06:14 PM

I'm checking other posts as there is a piece on each side I don't see....

**DeadheadNM** · 02-09-2014, 06:21 PM

I don't see these "brackets" on your hatch. Not sure if these are what contact the rubber bumpers or not (my K5 isn't here at moment to check) or if absence would increase noise:

Dirt's72 · 02-09-2014, 06:45 PM

I confirmed this on my hatch asolde. Yours is missing those cover peices on both sides of your hatch and they ride on the rubber peices when hatch is closed. Good eye Pete.

**DeadheadNM** · 02-09-2014, 06:53 PM

Quote:

Originally Posted by Dirt's72

I confirmed this on my hatch asolde. Yours is missing those cover peices on both sides of your hatch and they ride on the rubber peices when hatch is closed. Good eye Pete.

Thanks Derek - maybe the absence contributes to the rattle. I have a spare set of these somewhere.

asolde · 02-09-2014, 07:28 PM

Quote:

Originally Posted by DeadheadNM

Thanks Derek - maybe the absence contributes to the rattle. I have a spare set of these somewhere.

That would be cool if you had an extra set Pete, Let me know. Thanks for the help guys. Alex

**DeadheadNM** · 02-09-2014, 08:00 PM

You bet Alex - here's the set I have. These haven't been cleaned and show light surface rust - I believe they'll clean up very nicely.

I'd part with them for $30 shipped after I check my hatch to make sure I do have them

I once sold a fuel neck cover in great shape not realizing I needed one for my K5

asolde · 02-09-2014, 08:08 PM

Quote:

Originally Posted by DeadheadNM

You bet Alex - here's the set I have. These haven't been cleaned and show light surface rust - I believe they'll clean up very nicely.

I'd part with them for $30 shipped after I check my hatch to make sure I do have them

I once sold a fuel neck cover in great shape not realizing I needed one for my K5

Ok Pete I'll take them off your hands if you don't need them. Thanks Alex

**DeadheadNM** · 02-09-2014, 10:20 PM

Quote:

Originally Posted by asolde

Ok Pete I'll take them off your hands if you don't need them. Thanks Alex

We're all good. I ran and checked - I do have a set on my hatch. PM on the way....

cleszkie · 02-11-2014, 06:35 PM

The long rods inside the hatch that run from the T-handle to the catches on either side can rattle too if you don't have the little foam deadeners on them anymore.

asolde · 02-11-2014, 07:42 PM

Quote:

Originally Posted by cleszkie

The long rods inside the hatch that run from the T-handle to the catches on either side can rattle too if you don't have the little foam deadeners on them anymore.

Thanks I will take a look at that. Where can I see them from?

cleszkie · 02-18-2014, 04:51 PM

To see the rods you have to remove the access panel under the t-handle. You can kind of see them if you use a little mirror to see inside the hatch. If you can't see them, then you can un-clip the rod ends from the t-handle cam and unbolt the catch mechanisms on the sides of the hatch and pull the mechanisms out. The rods will be clipped to the mechanisms. The foam deadeners are little foam blocks that are attached to the rods.

BBrendal · 02-20-2014, 05:48 AM

Remove top...

Problem solved!

Dirt's72 · 02-20-2014, 08:42 AM

Quote:

Originally Posted by BBrendal

Remove top...

Problem solved!

Brian, my father and brothers live in New Lenox. I'll be there to visit this summer. Looks like your in for a heat wave today. Bust out the rain gear and enjoy. Doesn't look good after today.

BBrendal · 02-20-2014, 10:33 AM

Quote:

Originally Posted by Dirt's72

Brian, my father and brothers live in New Lenox. I'll be there to visit this summer. Looks like your in for a heat wave today. Bust out the rain gear and enjoy. Doesn't look good after today.

Small world! Another funny thing is my Blazer came from Albuquerque NM. Yea real heat wave today we may hit 50! When you head out this way over the summer let me know it would be nice to meet you!

Chulisohombre · 02-20-2014, 10:49 AM

I wish they made hatch parts aftermarket. It is very limited and the rwpop hatch itself I heard is a piece of crap as well. It's good we can find stuff from other members that still works good here.

fun in dirt · 02-20-2014, 01:14 PM

Quote:

Originally Posted by BBrendal

Remove top...

Problem solved!

That's exactly what I was thinking too...wind covers alot of the noises!

Dirt's72 · 02-20-2014, 08:51 PM

Quote:

Originally Posted by BBrendal

Small world! Another funny thing is my Blazer came from Albuquerque NM. Yea real heat wave today we may hit 50! When you head out this way over the summer let me know it would be nice to meet you!

Looking forward to it Brian. I looked at your build sometime back. Your blazers are super nice!

02-09-2014, 03:39 PM	#1
asolde Registered User Join Date: Apr 2012 Location: Henderson Nevada Posts: 804	69 Blazer Hatch rattle What are you guys doing to fix the hatch from rattleing so much? Drives me nuts..... __________________ 1972 cheverolet K5 CST Blazer 350/auto/AC/PS/PB/Aux Batt From Medford, Oregon

02-09-2014, 03:46 PM	#2
1tuff71 Registered User Join Date: Dec 2008 Location: Clarkston, Michigan Posts: 465	Re: 69 Blazer Hatch rattle Are you missing the strip on the tailgate ? Maybe you need to adjust the latch catches.

02-09-2014, 05:56 PM	#4
asolde Registered User Join Date: Apr 2012 Location: Henderson Nevada Posts: 804	Re: 69 Blazer Hatch rattle I don't think I am missing any parts.It must have drove the original owner nuts too because there are make shift pads and rub strips all around the hatch. The hatch is not centered in the opening for one thing. I think there are fore and aft adjustments on the upper hinges but not sure. Here are a few pics. Attached Images __________________ 1972 cheverolet K5 CST Blazer 350/auto/AC/PS/PB/Aux Batt From Medford, Oregon

02-09-2014, 05:58 PM	#5
asolde Registered User Join Date: Apr 2012 Location: Henderson Nevada Posts: 804	Re: 69 Blazer Hatch rattle more pics Attached Images __________________ 1972 cheverolet K5 CST Blazer 350/auto/AC/PS/PB/Aux Batt From Medford, Oregon

02-09-2014, 06:12 PM	#6
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,443	Re: 69 Blazer Hatch rattle Huh, it does look complete. How's the gasket quality? All the bolts tight? Are the rubber bumpers doing anything or need to be tweaked for better contact with the hatch? Is the tailgate loose or malaligned? __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

02-09-2014, 06:14 PM	#7
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,443	Re: 69 Blazer Hatch rattle I'm checking other posts as there is a piece on each side I don't see.... __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

02-09-2014, 06:21 PM	#8
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,443	Re: 69 Blazer Hatch rattle I don't see these "brackets" on your hatch. Not sure if these are what contact the rubber bumpers or not (my K5 isn't here at moment to check) or if absence would increase noise: Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

02-09-2014, 06:45 PM	#9
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,106	Re: 69 Blazer Hatch rattle I confirmed this on my hatch asolde. Yours is missing those cover peices on both sides of your hatch and they ride on the rubber peices when hatch is closed. Good eye Pete.

02-09-2014, 08:00 PM	#12
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,443	Re: 69 Blazer Hatch rattle You bet Alex - here's the set I have. These haven't been cleaned and show light surface rust - I believe they'll clean up very nicely. I'd part with them for $30 shipped after I check my hatch to make sure I do have them I once sold a fuel neck cover in great shape not realizing I needed one for my K5 Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

02-11-2014, 06:35 PM	#15
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: 69 Blazer Hatch rattle The long rods inside the hatch that run from the T-handle to the catches on either side can rattle too if you don't have the little foam deadeners on them anymore.

02-18-2014, 04:51 PM	#17
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: 69 Blazer Hatch rattle To see the rods you have to remove the access panel under the t-handle. You can kind of see them if you use a little mirror to see inside the hatch. If you can't see them, then you can un-clip the rod ends from the t-handle cam and unbolt the catch mechanisms on the sides of the hatch and pull the mechanisms out. The rods will be clipped to the mechanisms. The foam deadeners are little foam blocks that are attached to the rods.

02-20-2014, 05:48 AM	#18
BBrendal Recalculating..... Join Date: Nov 2010 Location: New Lenox Il Posts: 686	Re: 69 Blazer Hatch rattle Remove top... Problem solved! __________________ Brian - (BBrendal) 1969 Chevy Camaro Z28 1972 Chevy Blazer CST 2004 GMC Yukon (The truck that pulls the car trailer) 1972 Chevy Blazer CST #2 (Finished and sold!) Blazer build link... http://s1213.photobucket.com/albums/...rendal/Blazer/

02-20-2014, 10:49 AM	#21
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: 69 Blazer Hatch rattle I wish they made hatch parts aftermarket. It is very limited and the rwpop hatch itself I heard is a piece of crap as well. It's good we can find stuff from other members that still works good here. __________________ 72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.