![]() |
![]() |
#1 |
Registered User
Join Date: Apr 2009
Location: huntingdon tn
Posts: 19
|
Front Wheel Clearance
Ok, I've got a 69 chassis, 85 front crossmember with McGaughy's 2.5 drop spindles. I was going to use the 85 15" rallyes for temporary rollers but when I put them on I'm so close to the tie rod the wheel weight hits. Back spacing appears to be 4.25. Am I missing something? I did a search and people on here seem to be using the same combo so I'm stumped. I've got a pic but I've got to upload it.
__________________
69 C10 LWB (SWB now) |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Apr 2009
Location: huntingdon tn
Posts: 19
|
Re: Front Wheel Clearance
__________________
69 C10 LWB (SWB now) |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2009
Location: huntingdon tn
Posts: 19
|
Re: Front Wheel Clearance
Well, I guess I missed the rally wheel FAQ. Sorry, my bad. I guess I'll use some spacers for now. They are only temporary.
__________________
69 C10 LWB (SWB now) |
![]() |
![]() |
![]() |
#4 |
Too many projects
Join Date: Mar 2004
Location: Fargo, ND land of the flat hills
Posts: 1,147
|
Re: Front Wheel Clearance
Or you can knock off the weights and use stick on weights. That's what I had to do with the 15x7s on my 70.
__________________
Andrew 84 GMC C1500 SWB 6.2 Diesel/700R4/3.42 "Grandpa's odd duck" |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Front Wheel Clearance
dont need wheel weights for a roller project
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Apr 2009
Location: huntingdon tn
Posts: 19
|
Re: Front Wheel Clearance
I'd really like to run these for awhile. Even without weights, there's only about a 1/16" clearance on the tie rod. I'm afraid ther would be enough flex to rub sometimes. If I space them 1/4" do you think I would run into fender rub?
Edit: They are 15 X 8.
__________________
69 C10 LWB (SWB now) Last edited by dlturner00; 02-27-2014 at 11:35 AM. Reason: More info |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Sep 2007
Location: Katy TX
Posts: 1,268
|
Re: Front Wheel Clearance
I use 15x7 rims up front
__________________
![]() Slammed 53 5 window Blown/Bagged 54 Pickup Patinaed 67 LS stepside Supercharged 67 Nova Bagged 69 Suburban Turbo'ed 5.3 LS |
![]() |
![]() |
![]() |
#8 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
![]()
You can shave a little off the steering to. Shouldn't take a lot just enough to clear them.
![]() ![]()
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 ![]() Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Apr 2009
Location: huntingdon tn
Posts: 19
|
Re: Front Wheel Clearance
That may be the answer, if I can find some. Right side is actually a little worse than the left. I'll go with some spacers until I get to the fenders and see what happens there.
__________________
69 C10 LWB (SWB now) |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Apr 2009
Location: huntingdon tn
Posts: 19
|
Re: Front Wheel Clearance
Somehow I didn't notice, but I discovered that I had 2 7" wheels an 2 8" wheels. These wheels were on an 85 donor truck I used. Don't know why there were 2 different sizes on that truck, it was completely stock. Dumb luck I guess. Still pretty tight in the tie rod but no rub.
__________________
69 C10 LWB (SWB now) |
![]() |
![]() |
![]() |
#11 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Front Wheel Clearance
A local member here just had the exact same problem. He had a bad vibration. His wheel weights were rubbed down from hitting and became unbalanced. He took his wheels and had them balanced using the stick on weights on the back/inside of the wheel (like they use on modern wheels).
These: ![]()
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|