some new stuff coming out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*rickspickuppart* · 12-19-2003, 08:30 PM

one piece molded carpets that go all the way to the back of the cab and wraps down into holes on the sides of the cab (it will be left an inch or so to long so it can be trimmed to ensure propper fit) - 95.00 - out by the end of next week

new blazer door end caps (the ones that go up in the hole in the door above the vent window) - about 25.00 each - available in about a month

rear of cab (gas tank area) carpet (seamed edges and will go below the flat spot under the window, down to the floor and from side to side - this item is intended for trucks that have relocated the original gas tank (it will be left an inch or so to long so it can be trimmed to ensure propper fit) - 60.00 - out by the end of next week

Shawn

FuelCellGuy · 12-19-2003, 10:01 PM

soon???

Blue_71 · 12-19-2003, 11:59 PM

whats the chance of a 1 piece molded rubber mat that goes that far for a high hump?

SNOOP1 · 12-20-2003, 02:24 AM

No offense but the carpet is done out. I seen it test fitted with my own eyes and it fits great! Actually one of the board members have done been selling it.

jacquesdean · 12-20-2003, 03:36 AM

Shawn, I've installed the headliner you sold me, fits great, thanks again.

Will or would like black carpet behind seat for relocating gas tank

also, do you sell the poly tank that fits in the rear, and how much.

Jock.

*Pardue'sCustoms* · 12-20-2003, 10:06 AM

do you sell the poly tank that fits in the rea

Tim Christian sells the metal blaser tank much better i thank

and he is a great person to buy from

EighthD · 12-20-2003, 10:55 AM

I have been buying parts from Ricks for as long as they been coming to the San Diego swap meet. And have been very happy with their parts and service. Rick stands behind all of his parts. I will be looking for you on sunday I need a front bumper.

**Tim Christian** · 12-20-2003, 05:35 PM

Hey SNOOP1 and Pardue'sCustoms, I Thank both of you all for your bussiness. But this is Shawn @ Ricks pickup parts thread. He is a Great guy and they are just making a living like all of us board vendors do. So please don't hijack their thread talking about me. Again Doug & Tony I think the world of both of you guys but I think this kind of thing is a turn off to both new and old members alike. Sorry about that Shawn. Thanks Tim @ Christian's Classics

2wdBlazer · 12-21-2003, 10:38 PM

Shawn,

Please contact me when I can purchase the door caps.

*rickspickuppart* · 12-22-2003, 02:37 AM

no problem and thanks Tim,

and actually the caprets aren't the same ones, ours will extend down into the holes in the cab corners (guess they aren't "done out")

Shawn

*rickspickuppart* · 12-22-2003, 02:47 AM

and for all concerned the blazer tanks we have are the metal tank kits for 175.00 - just an FYI

Shawn

DanoDMano · 12-22-2003, 03:01 AM

You just got to like Guy's like Tim Christian!!!!!

That carpet sounds cool, will it be available in all colors??

*rickspickuppart* · 12-22-2003, 03:15 AM

yes it will be, I just sent them back the prototype on thursday, so I should be hearing back pretty soon

shawn

BUXMAN66 · 12-24-2003, 04:17 AM

thats pretty stand up tim ! (from a past customer of yours) !!

soala70 · 12-28-2003, 08:37 PM

2 things what are the measurements on the metal tanks on special and are you out of any of the other special offers?

thanks RICKY B.

soala70 · 12-29-2003, 02:19 AM

ttt

71-longbed · 12-29-2003, 05:26 AM

im very interested in the 95 dollar carpet set .... i'd like to see pics ... black is the color i'd want

*rickspickuppart* · 12-29-2003, 11:22 AM

I'm not out of anything else and I can't give a measurment for the tank since I wont have any for a week or so, the carpet I should (hopefully) have a couple of them in a week or so

Shawn

12-19-2003, 08:30 PM	#1
rickspickuppart Account Suspended Join Date: Jul 2003 Posts: 1,284	some new stuff coming out one piece molded carpets that go all the way to the back of the cab and wraps down into holes on the sides of the cab (it will be left an inch or so to long so it can be trimmed to ensure propper fit) - 95.00 - out by the end of next week new blazer door end caps (the ones that go up in the hole in the door above the vent window) - about 25.00 each - available in about a month rear of cab (gas tank area) carpet (seamed edges and will go below the flat spot under the window, down to the floor and from side to side - this item is intended for trucks that have relocated the original gas tank (it will be left an inch or so to long so it can be trimmed to ensure propper fit) - 60.00 - out by the end of next week Shawn

12-19-2003, 10:01 PM	#2
FuelCellGuy FUEL CELL GURU Join Date: Aug 2003 Location: Mineola, Texas Posts: 993	Pics??? soon???

12-20-2003, 03:36 AM	#5
jacquesdean Registered User Join Date: Jan 2003 Location: Snead, Alabama Posts: 399	re: carpet Shawn, I've installed the headliner you sold me, fits great, thanks again. Will or would like black carpet behind seat for relocating gas tank also, do you sell the poly tank that fits in the rear, and how much. Jock. __________________ Jock, Powder blasting shop, Alabama

12-21-2003, 10:38 PM	#9
2wdBlazer The Blazer King Join Date: Sep 2000 Location: Valrico, Fl (Tampa) Posts: 1,212	Shawn, Please contact me when I can purchase the door caps. __________________ 72 2wd Blazer. Its the superbichinest, megacoolinest, superflowinest.

12-22-2003, 02:37 AM	#10
rickspickuppart Account Suspended Join Date: Jul 2003 Posts: 1,284	no problem and thanks Tim, and actually the caprets aren't the same ones, ours will extend down into the holes in the cab corners (guess they aren't "done out") Shawn Last edited by rickspickuppart; 12-22-2003 at 02:44 AM.

12-20-2003, 02:24 AM	#4
SNOOP1 Registered User Join Date: Aug 2003 Location: ROGERSVILLE,TN. Posts: 33	No offense but the carpet is done out. I seen it test fitted with my own eyes and it fits great! Actually one of the board members have done been selling it.

12-20-2003, 10:06 AM	#6
Pardue'sCustoms Account Suspended Join Date: Feb 2003 Location: Jonesville NC Posts: 618	do you sell the poly tank that fits in the rea Tim Christian sells the metal blaser tank much better i thank and he is a great person to buy from

12-20-2003, 10:55 AM	#7
EighthD Registered User Join Date: Dec 1999 Location: Santee Ca Posts: 251	I have been buying parts from Ricks for as long as they been coming to the San Diego swap meet. And have been very happy with their parts and service. Rick stands behind all of his parts. I will be looking for you on sunday I need a front bumper.

12-20-2003, 05:35 PM	#8
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Hey SNOOP1 and Pardue'sCustoms, I Thank both of you all for your bussiness. But this is Shawn @ Ricks pickup parts thread. He is a Great guy and they are just making a living like all of us board vendors do. So please don't hijack their thread talking about me. Again Doug & Tony I think the world of both of you guys but I think this kind of thing is a turn off to both new and old members alike. Sorry about that Shawn. Thanks Tim @ Christian's Classics

12-22-2003, 02:47 AM	#11
rickspickuppart Account Suspended Join Date: Jul 2003 Posts: 1,284	and for all concerned the blazer tanks we have are the metal tank kits for 175.00 - just an FYI Shawn

12-22-2003, 03:01 AM	#12
DanoDMano Pronounced "Pew-al-up" Join Date: Oct 2002 Location: Puyallup, Washington Posts: 845	You just got to like Guy's like Tim Christian!!!!! That carpet sounds cool, will it be available in all colors?? __________________ Classic GM Trucks of Washington Club Member 1970 FS chevy,350/350, Edelbrock cam and intake. Holley 650 carb,HEI,AT,Tangier Orange, 18's, Power Locks, Truck Photos

12-22-2003, 03:15 AM	#13
rickspickuppart Account Suspended Join Date: Jul 2003 Posts: 1,284	yes it will be, I just sent them back the prototype on thursday, so I should be hearing back pretty soon shawn

12-24-2003, 04:17 AM	#14
BUXMAN66 go bucks! Join Date: Jan 2002 Location: MIAMISBURG OHIO USA Posts: 803	thats pretty stand up tim ! (from a past customer of yours) !! __________________ '68 swb 1/2t 350/350th '86 lngbd 3/4 TON parts getter '49 gmc 1/2 t 5 window 350/350th '96 gmc sonoma sle ext-cab. hey it's a 4cyl. 5 spd and good on gas y'know?

12-28-2003, 08:37 PM	#15
soala70 Registered User Join Date: Mar 2002 Location: geneva al usa Posts: 343	2 things what are the measurements on the metal tanks on special and are you out of any of the other special offers? thanks RICKY B. __________________ bogey5

12-29-2003, 02:19 AM	#16
soala70 Registered User Join Date: Mar 2002 Location: geneva al usa Posts: 343	ttt __________________ bogey5



Register or Log In To remove these advertisements.

12-29-2003, 05:26 AM	#17
71-longbed Its Magically Delicious Join Date: Jan 2003 Location: oregon Posts: 2,398	im very interested in the 95 dollar carpet set .... i'd like to see pics ... black is the color i'd want __________________ 71 C10 LWB 350sbc -TH350 12 bolt 3.42 Posi Of all my favorite things to do, The utmost is to have a brew. My love grows for my foamy friend, with each thirst-quenching elbow bend. Beer so frosty, smooth, and cold it's paradise pure liquid gold. Yes beer means many things to me that's all for now cus I gotta pee.

12-29-2003, 11:22 AM	#18
rickspickuppart Account Suspended Join Date: Jul 2003 Posts: 1,284	I'm not out of anything else and I can't give a measurment for the tank since I wont have any for a week or so, the carpet I should (hopefully) have a couple of them in a week or so Shawn

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.