GM 350, price? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1971 Cheyenne · 12-31-2003, 02:42 AM

Hey all,

I have a GM Goodwrench crate motor that has 29,000 miles on it. Some guy that I know wants to buy it from me for his 3rd gen firebird. It is complete with a aluminum 4 barrell intake, but no carb. Has a GM HEI. Has starter/oil pan, basically everything needed to run except carb and all the accessories. I'm not sure If I want to sell it, but if I do, how much should I ask? It runs like a top and starts every time on the first crank.

Any suggestiong would be appreciated.

Thanks

Brian(Poodude)

neonlarry · 12-31-2003, 02:47 AM

they cost $1300 new.

gr8scott51 · 12-31-2003, 02:48 AM

At least a thou. I spent that much on a rebuilt 4 bolt, 350 without the intake, HEI, etc. Don't give it away, but keep it lubed, dry and warm if you're storing it. Scott

J.Lance · 12-31-2003, 02:51 AM

What was it, about $1800 new for a economy crate motor? I'd say about half of that. Sounds cheap with the HEI and manifold but new engines are like new cars, they depreciate imediately after driving it off the lot. You may be able to ask a little more since your friend will know its correct history and doesn't have to worry if the seller is telling him the truth on mileage, etc...Then again, he is your friend so he might want a good guy deal. Just my 2 cents.

cdowns · 12-31-2003, 02:59 AM

i'm cheap i'd say 5-6hundred for a used engine with no warrenty

1971 Cheyenne · 12-31-2003, 04:06 AM

ttt,

thanks for the suggestions guys, keep them coming.

12-31-2003, 02:42 AM	#1
1971 Cheyenne Registered User Join Date: Nov 2002 Location: Bellevue, WA Posts: 1,480	GM 350, price? Hey all, I have a GM Goodwrench crate motor that has 29,000 miles on it. Some guy that I know wants to buy it from me for his 3rd gen firebird. It is complete with a aluminum 4 barrell intake, but no carb. Has a GM HEI. Has starter/oil pan, basically everything needed to run except carb and all the accessories. I'm not sure If I want to sell it, but if I do, how much should I ask? It runs like a top and starts every time on the first crank. Any suggestiong would be appreciated. Thanks Brian(Poodude) __________________ Brian Pal 1971 Cheyenne 10 454/th400-Undergoing a full frame off resto. 1972 Chevy short/step 2wd, 350/th350 1983 M1009 CUCV Military K5 Blazer 1981 Dodge 1 ton 4x4 dually flatbed

12-31-2003, 02:47 AM	#2
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	they cost $1300 new. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

12-31-2003, 02:48 AM	#3
gr8scott51 Registered User Join Date: Mar 2003 Location: Bremerton, WA Posts: 1,839	At least a thou. I spent that much on a rebuilt 4 bolt, 350 without the intake, HEI, etc. Don't give it away, but keep it lubed, dry and warm if you're storing it. Scott __________________ Silence is golden, duct tape is silver. - Scott

12-31-2003, 02:51 AM	#4
J.Lance Too many is never enough! Join Date: May 2003 Location: Idaho Falls, ID Posts: 455	What was it, about $1800 new for a economy crate motor? I'd say about half of that. Sounds cheap with the HEI and manifold but new engines are like new cars, they depreciate imediately after driving it off the lot. You may be able to ask a little more since your friend will know its correct history and doesn't have to worry if the seller is telling him the truth on mileage, etc...Then again, he is your friend so he might want a good guy deal. Just my 2 cents. __________________ Jason 1968 K10 SWB Fleetside 1971 K2500 GMC LWB 1968 K20 (later frame, donor body) 1972 C20 LWB parts truck 1993 K2500 Suburban, tow rig, 454, 4L80E NEW!! 18' Siem's car hauler 2004 Honda Odyssey (family man!)

12-31-2003, 02:59 AM	#5
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	i'm cheap i'd say 5-6hundred for a used engine with no warrenty __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

12-31-2003, 04:06 AM	#6
1971 Cheyenne Registered User Join Date: Nov 2002 Location: Bellevue, WA Posts: 1,480	ttt, thanks for the suggestions guys, keep them coming. __________________ Brian Pal 1971 Cheyenne 10 454/th400-Undergoing a full frame off resto. 1972 Chevy short/step 2wd, 350/th350 1983 M1009 CUCV Military K5 Blazer 1981 Dodge 1 ton 4x4 dually flatbed

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.