What did you do to your Blazer/Jimmy today? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DeadheadNM** · 04-10-2014, 07:04 PM

Pickup forum has a similar thread so why not K5's?

Had 3.73's and a front posi installed in my Blazer today and upgraded to a better shade of blue hub actuator dials.

What did you do today?

asolde · 04-10-2014, 07:36 PM

Got a spare tire carrier for my new Blazer. I cleaned it up and painted it.

**DeadheadNM** · 04-10-2014, 07:51 PM

Nice!

Chulisohombre · 04-11-2014, 07:19 AM

Pulled into the driveway after Work and wished I had more time To put into the old Girl. Tree fell on it during hurricane sandy so I need to get a new windshield and repair the top.

pkz71 · 04-13-2014, 06:23 PM

Washed it!

briank · 04-13-2014, 07:52 PM

Started to patch the pass side floor, then will move to the kick panel , inner/outer rockers along with the front pillar and b pillar......then to the drivers side on my 70

**DeadheadNM** · 04-13-2014, 10:26 PM

Two steps forward: installed an internally regulated alternator and hooked up the auxiliary battery

Two steps back: discovered an antifreeze leak that tells me the heater core is bad and my fancy Oldsmobile AC compressor belt shield won't fit because of the CA emissions brackets required for the compressor

Will post this for sale, it's a cool add

**Steven B** · 04-14-2014, 10:34 AM

Took the top off.

grillzy · 04-14-2014, 05:26 PM

Finnished shipping and border papers for a new ride.

**DeadheadNM** · 04-14-2014, 10:37 PM

Quote:

Originally Posted by Steven B

Took the top off.

Pics man!

Quote:

Originally Posted by grillzy

Finnished shipping and border papers for a new ride.

Congrats! Where did you finally locate one? Post pics when poss.

grillzy · 04-15-2014, 06:40 AM

Quote:

Originally Posted by DeadheadNM

Pics man!

Congrats! Where did you finally locate one? Post pics when poss.

More pictures and details once she is home.

Asphalt · 04-18-2014, 05:32 PM

I came home and found that UPS had dropped my LMC order....

Saturday should be productive.

1972 Jimmy · 04-18-2014, 09:50 PM

Removing cancer and Welding in new metal. Lets see if I can get one side done this weekend?
Name: 20140418_214351.jpg
Views: 7490
Size: 39.2 KB

Name: 20140418_214411.jpg
Views: 7461
Size: 41.0 KB

asolde · 04-19-2014, 07:23 AM

I did a tune up, changed my altenator, changed my oil. Thats my new Blazer but not my shop.

PHAT TONY · 04-19-2014, 09:53 PM

Got 2 of 4 hand-made tail light bezels done and polished.

**DeadheadNM** · 04-19-2014, 10:26 PM

I swapped the old RH rear CST panel for a repro and scrubbed the slider windows I was able to track down. Not sure I'm thrilled about the tint. Only set I've seen that's a factory tint - frames are black.

asolde · 04-20-2014, 07:44 AM

I wash it,then I clay bar it, then I polised it.

asolde · 04-20-2014, 04:56 PM

Then I waxed it.

timski69gmc · 04-20-2014, 06:03 PM

Quote:

Originally Posted by DeadheadNM

I swapped the old RH rear CST panel for a repro and scrubbed the slider windows I was able to track down. Not sure I'm thrilled about the tint. Only set I've seen that's a factory tint - frames are black.

Hey deadheadnm, where did you get the repro panel in the saddle? Just what I'm looking for.

**DeadheadNM** · 04-20-2014, 06:20 PM

Quote:

Originally Posted by timski69gmc

Hey deadheadnm, where did you get the repro panel in the saddle? Just what I'm looking for.

Those came via Brothers Trucks. I've since learned that forum member Truckseats can get these also. He's provided me with two excellent sets of covers for my pickups. Send him a PM.

timski69gmc · 04-20-2014, 11:45 PM

Thanks. Looks like I have some covers coming from Truckseats. Might have to increase my order.
This weekend is installing my tach cluster. Pictures to come!

Sacramento70 · 04-21-2014, 08:42 PM

Quote:

Originally Posted by PHAT TONY

Got 2 of 4 hand-made tail light bezels done and polished.

What was the process of making those and what materials did you use. I like them alot, very cool idea and surprisingly innovative that looks stock

PHAT TONY · 04-21-2014, 10:30 PM

I made patterns out of box board, took em to a shop that water jetted them from 3/16 aluminum, sand sand sand and polish. More work to the lenses to make them fit just right though. Thank you for the compliment; my Blazer is full of little things that took MAJOR time and effort that you have to point out to people if I want them to notice.

dialric · 04-22-2014, 08:59 PM

Got the rear floor finished in the Blazer 2WD

87Skier · 04-23-2014, 04:07 AM

I pulled my broken SBC 400, to start a rebuild.

04-10-2014, 07:04 PM	#1
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,443	What did you do to your Blazer/Jimmy today? Pickup forum has a similar thread so why not K5's? Had 3.73's and a front posi installed in my Blazer today and upgraded to a better shade of blue hub actuator dials. What did you do today? Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-10-2014, 07:36 PM	#2
asolde Registered User Join Date: Apr 2012 Location: Henderson Nevada Posts: 804	Re: What did you do to your Blazer/Jimmy today? Got a spare tire carrier for my new Blazer. I cleaned it up and painted it. Attached Images __________________ 1972 cheverolet K5 CST Blazer 350/auto/AC/PS/PB/Aux Batt From Medford, Oregon

04-10-2014, 07:51 PM	#3
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,443	Re: What did you do to your Blazer/Jimmy today? Nice! __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-11-2014, 07:19 AM	#4
Chulisohombre Registered User Join Date: Sep 2013 Location: Bangor pa Posts: 1,223	Re: What did you do to your Blazer/Jimmy today? Pulled into the driveway after Work and wished I had more time To put into the old Girl. Tree fell on it during hurricane sandy so I need to get a new windshield and repair the top. __________________ 72 3/4 ton blazer. 5 inch lift on 35 inch tires. 355 corvette engine with crane roller rockers, rv cam, edelbrock carb and intake with one inch spacer. Thrush Headers with flowmaster 40 duels. 4speed sm465 manual. 4 wheel disk brakes with Inboarded rear shock prerunner style mounts and shocks.

04-13-2014, 06:23 PM	#5
pkz71 Registered User Join Date: Dec 2013 Location: Bothell, WA Posts: 30	Re: What did you do to your Blazer/Jimmy today? Washed it! Attached Images

04-13-2014, 07:52 PM	#6
briank Registered User Join Date: Sep 2011 Location: Leland, Il Posts: 1,503	Re: What did you do to your Blazer/Jimmy today? Started to patch the pass side floor, then will move to the kick panel , inner/outer rockers along with the front pillar and b pillar......then to the drivers side on my 70

04-13-2014, 10:26 PM	#7
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,443	Re: What did you do to your Blazer/Jimmy today? Two steps forward: installed an internally regulated alternator and hooked up the auxiliary battery Two steps back: discovered an antifreeze leak that tells me the heater core is bad and my fancy Oldsmobile AC compressor belt shield won't fit because of the CA emissions brackets required for the compressor Will post this for sale, it's a cool add Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-14-2014, 10:34 AM	#8
Steven B Senior Member Join Date: Jan 2000 Location: LHC, AZ Posts: 385	Re: What did you do to your Blazer/Jimmy today? Took the top off. __________________ 70 Jimmy 4x4 71 GMC 2500 Too bad stupidity isn't painful

04-14-2014, 05:26 PM	#9
grillzy Registered User Join Date: Jan 2014 Location: belleville ontario Posts: 354	Re: What did you do to your Blazer/Jimmy today? Finnished shipping and border papers for a new ride.

04-18-2014, 05:32 PM	#12
Asphalt Registered User Join Date: Mar 2014 Location: Hartford, CT Posts: 30	Re: What did you do to your Blazer/Jimmy today? I came home and found that UPS had dropped my LMC order.... Saturday should be productive.

04-18-2014, 09:50 PM	#13
1972 Jimmy Registered User Join Date: Nov 2012 Location: Freeland, Michigan Posts: 1,385	Re: What did you do to your Blazer/Jimmy today? Removing cancer and Welding in new metal. Lets see if I can get one side done this weekend?

04-19-2014, 07:23 AM	#14
asolde Registered User Join Date: Apr 2012 Location: Henderson Nevada Posts: 804	Re: What did you do to your Blazer/Jimmy today? I did a tune up, changed my altenator, changed my oil. Thats my new Blazer but not my shop. Attached Images __________________ 1972 cheverolet K5 CST Blazer 350/auto/AC/PS/PB/Aux Batt From Medford, Oregon

04-19-2014, 09:53 PM	#15
PHAT TONY Registered User Join Date: Aug 2008 Location: Red Deer ab canada Posts: 1,250	Re: What did you do to your Blazer/Jimmy today? Got 2 of 4 hand-made tail light bezels done and polished. Attached Images __________________ 1972 factory 2 Wheel Drive Blazer-Sold 1972 K10 4X4-Sold 1971 Chevrolet Cheyenne/10-Sold 1970 Chevrolet C/10-Sold 1968 GMC 4X4-Project 1968 Chevrolet C/10 Pro Street 1970 GMC 3/4 Ton-Parts 1997 2WD 2DR Yukon-Sweet http://67-72chevytrucks.com/vboard/s...d.php?t=335664

04-19-2014, 10:26 PM	#16
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,443	Re: What did you do to your Blazer/Jimmy today? I swapped the old RH rear CST panel for a repro and scrubbed the slider windows I was able to track down. Not sure I'm thrilled about the tint. Only set I've seen that's a factory tint - frames are black. Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-20-2014, 07:44 AM	#17
asolde Registered User Join Date: Apr 2012 Location: Henderson Nevada Posts: 804	Re: What did you do to your Blazer/Jimmy today? I wash it,then I clay bar it, then I polised it. Attached Images __________________ 1972 cheverolet K5 CST Blazer 350/auto/AC/PS/PB/Aux Batt From Medford, Oregon



Register or Log In To remove these advertisements.

04-20-2014, 04:56 PM	#18
asolde Registered User Join Date: Apr 2012 Location: Henderson Nevada Posts: 804	Re: What did you do to your Blazer/Jimmy today? Then I waxed it. Attached Images __________________ 1972 cheverolet K5 CST Blazer 350/auto/AC/PS/PB/Aux Batt From Medford, Oregon

04-20-2014, 11:45 PM	#21
timski69gmc Registered User Join Date: Nov 2009 Location: Cranbrook, BC Posts: 253	Re: What did you do to your Blazer/Jimmy today? Thanks. Looks like I have some covers coming from Truckseats. Might have to increase my order. This weekend is installing my tach cluster. Pictures to come!

04-21-2014, 10:30 PM	#23
PHAT TONY Registered User Join Date: Aug 2008 Location: Red Deer ab canada Posts: 1,250	Re: What did you do to your Blazer/Jimmy today? I made patterns out of box board, took em to a shop that water jetted them from 3/16 aluminum, sand sand sand and polish. More work to the lenses to make them fit just right though. Thank you for the compliment; my Blazer is full of little things that took MAJOR time and effort that you have to point out to people if I want them to notice. __________________ 1972 factory 2 Wheel Drive Blazer-Sold 1972 K10 4X4-Sold 1971 Chevrolet Cheyenne/10-Sold 1970 Chevrolet C/10-Sold 1968 GMC 4X4-Project 1968 Chevrolet C/10 Pro Street 1970 GMC 3/4 Ton-Parts 1997 2WD 2DR Yukon-Sweet http://67-72chevytrucks.com/vboard/s...d.php?t=335664

04-22-2014, 08:59 PM	#24
dialric Registered User Join Date: Nov 2008 Location: grand rapids michigan Posts: 324	Re: What did you do to your Blazer/Jimmy today? Got the rear floor finished in the Blazer 2WD Attached Images

04-23-2014, 04:07 AM	#25
87Skier Registered User Join Date: Mar 2014 Location: Corvallis, OR Posts: 715	Re: What did you do to your Blazer/Jimmy today? I pulled my broken SBC 400, to start a rebuild. Attached Images __________________ 1972 GMC Jimmy Custom 4.8L (L20)/6L90E/NP205 1989 Chevy Suburban V2500 350/Turbo 400/4.11 gears 1996 Chevy Suburban K1500 350/4L60E

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.