OK WTB: 4WD Exhaust Manifolds - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**lawest** · 02-28-2014, 11:45 PM

Looking for a pair of the OE center/straight dump manifolds for a SB 4WD. Left and Right are the same.

mx289 · 03-01-2014, 10:46 AM

TTT
I need a set as well.

Lawest,are you having as much trouble as me finding a set. ?
I hope you find them.

Tom

72junky · 03-01-2014, 11:09 AM

Hey guys, You may want to contact tll74 he is on the board. I am getting a set of angle back ones from him. You may also want to try ebay. type in Chevrolet exhaust manifolds, then on left column click used, then chevrolet. There are several. Be careful, some have bosses for alternator brackets, others have holes for the A.I.R. emission tubes. If you are doing a custom build, look for Corvette 2 1/2" ones. Our trucks come standard with 2". You may have to buy one at a time to get better pricing and watch out for shipping prices. There is one add for a manifold for $15 but the shipping is $57.50!!! "Buyer beware" Good luck!

**michael bustamante** · 03-01-2014, 12:00 PM

I have a nice one. Pm me a cell # or e mail and ill send you pics

beonkey · 03-01-2014, 04:51 PM

I have aftermarket set from oreillys. Both sides only used for about 500 mikes then converted to a 2wd.

no moa · 03-01-2014, 04:55 PM

Like these type?

**lawest** · 03-01-2014, 07:43 PM

Quote:

Originally Posted by michael bustamante

I have a nice one. Pm me a cell # or e mail and ill send you pics

PM sent

**lawest** · 03-01-2014, 07:45 PM

Quote:

Originally Posted by 72junky

Hey guys, You may want to contact tll74 he is on the board. I am getting a set of angle back ones from him. You may also want to try ebay. type in Chevrolet exhaust manifolds, then on left column click used, then chevrolet. There are several. Be careful, some have bosses for alternator brackets, others have holes for the A.I.R. emission tubes. If you are doing a custom build, look for Corvette 2 1/2" ones. Our trucks come standard with 2". You may have to buy one at a time to get better pricing and watch out for shipping prices. There is one add for a manifold for $15 but the shipping is $57.50!!! "Buyer beware" Good luck!

Thanks 72Junky, I am watching some on ebay now.

**lawest** · 03-01-2014, 08:29 PM

Quote:

Originally Posted by no moa

Like these type?

PM sent

72junky · 03-01-2014, 08:58 PM

Your welcome Lawest,
If you don't find what you are needing here, try ebay search "center dump", "ram horn", and "sbc". The straight drops are a lot more common than the 2wd angle back manifolds. Local swap meets are another option, if you have time. I was seriously considering the 2 1/2" 'vette ones for my build, but, I have a nearly new dual exhaust that would need replacing if I went that route, it's only 2". Mo $, Mo $, Mo $... Good luck!

**lawest** · 04-13-2014, 10:55 PM

Here is what I ended up with:
Name: 100_0738.jpg
Views: 71
Size: 42.1 KB

Thanks to 72Junky I found a set on ebay for just over a $100 shipped. Then I spent $150 to have them ceramic coated. Should hold up and look good.

Vintage Windmills · 04-14-2014, 12:21 AM

What brand are those? They look nice but longer and larger diameter than original. curious to hear how they fit and work.

02-28-2014, 11:45 PM	#1
lawest Registered User Join Date: Jan 2008 Location: Tuttle, OK Posts: 205	WTB: 4WD Exhaust Manifolds Looking for a pair of the OE center/straight dump manifolds for a SB 4WD. Left and Right are the same. __________________ 69 K10 SWB Project Dream '69 2011 K2500 Silverado Beat to fit, Paint to match Dream '69 Build Thread

03-01-2014, 10:46 AM	#2
mx289 Registered User Join Date: May 2013 Location: wall,nj Posts: 865	Re: WTB: 4WD Exhaust Manifolds TTT I need a set as well. Lawest,are you having as much trouble as me finding a set. ? I hope you find them. Tom

03-01-2014, 11:09 AM	#3
72junky Registered User Join Date: Jun 2008 Location: Greenville, South Carolina Posts: 150	Re: WTB: 4WD Exhaust Manifolds Hey guys, You may want to contact tll74 he is on the board. I am getting a set of angle back ones from him. You may also want to try ebay. type in Chevrolet exhaust manifolds, then on left column click used, then chevrolet. There are several. Be careful, some have bosses for alternator brackets, others have holes for the A.I.R. emission tubes. If you are doing a custom build, look for Corvette 2 1/2" ones. Our trucks come standard with 2". You may have to buy one at a time to get better pricing and watch out for shipping prices. There is one add for a manifold for $15 but the shipping is $57.50!!! "Buyer beware" Good luck! __________________ 72junky *Don't worry my wife said it's ok.* '72 K10 custom/10 350/4spd,ps,pb,ac,tilt,tach,3:73 posi,buddy buckets - driver '72 Cheyenne/10 swb 355/th350,factory black, loaded and lowered - toy '72 Cheyenne/10 lwb, 350/th350,ps,pb,ac,tilt - current project build '72 K5 Blazer CST 350/th350,ps,pb,ac,tilt,tach,3:73 posi - project rust bucket -Unfortunately Sold plus 4 others too ashamed to post

03-01-2014, 12:00 PM	#4
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,848	Re: WTB: 4WD Exhaust Manifolds I have a nice one. Pm me a cell # or e mail and ill send you pics __________________ 1967custom

03-01-2014, 04:51 PM	#5
beonkey Registered User Join Date: Nov 2011 Location: Tustin, CA Posts: 229	Re: WTB: 4WD Exhaust Manifolds I have aftermarket set from oreillys. Both sides only used for about 500 mikes then converted to a 2wd.

03-01-2014, 04:55 PM	#6
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: WTB: 4WD Exhaust Manifolds Like these type? Attached Images __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

03-01-2014, 08:58 PM	#10
72junky Registered User Join Date: Jun 2008 Location: Greenville, South Carolina Posts: 150	Re: WTB: 4WD Exhaust Manifolds Your welcome Lawest, If you don't find what you are needing here, try ebay search "center dump", "ram horn", and "sbc". The straight drops are a lot more common than the 2wd angle back manifolds. Local swap meets are another option, if you have time. I was seriously considering the 2 1/2" 'vette ones for my build, but, I have a nearly new dual exhaust that would need replacing if I went that route, it's only 2". Mo $, Mo $, Mo $... Good luck! __________________ 72junky *Don't worry my wife said it's ok.* '72 K10 custom/10 350/4spd,ps,pb,ac,tilt,tach,3:73 posi,buddy buckets - driver '72 Cheyenne/10 swb 355/th350,factory black, loaded and lowered - toy '72 Cheyenne/10 lwb, 350/th350,ps,pb,ac,tilt - current project build '72 K5 Blazer CST 350/th350,ps,pb,ac,tilt,tach,3:73 posi - project rust bucket -Unfortunately Sold plus 4 others too ashamed to post

04-13-2014, 10:55 PM	#11
lawest Registered User Join Date: Jan 2008 Location: Tuttle, OK Posts: 205	Re: WTB: 4WD Exhaust Manifolds Here is what I ended up with: Thanks to 72Junky I found a set on ebay for just over a $100 shipped. Then I spent $150 to have them ceramic coated. Should hold up and look good. __________________ 69 K10 SWB Project Dream '69 2011 K2500 Silverado Beat to fit, Paint to match Dream '69 Build Thread

04-14-2014, 12:21 AM	#12
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: WTB: 4WD Exhaust Manifolds What brand are those? They look nice but longer and larger diameter than original. curious to hear how they fit and work. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.