|
04-24-2014, 09:48 PM
|
#1 |
|
Registered User
 Join Date: Jun 2011
Location: chillicothe mo
Posts: 225
|
leveling stance
what do I need to lower my 72 1/2 ton with leaf springs to the same height as my front end?
|
|
|
|
04-24-2014, 10:20 PM
|
#2 |
|
Registered User
Join Date: Sep 2011
Location: McAlester Olahoma
Posts: 114
|
Re: leveling stance
10 or 12 bags of concrete.Flip the rear.or use a set of drop shakles
|
|
|
|
|
04-25-2014, 07:42 AM
|
#3 |
|
Registered User
Join Date: Apr 2013
Location: South Westerlo, New York
Posts: 1,325
|
Re: leveling stance
Knock the springs apart and 'de'arch them. you can leave the main leaf in the truck, (the top leaf with the eyes in it) cut the center bolt, and hammer out the other leaves on an anvel or two pieces of rail, set them back in place, drop the truck and see if you dearched them enouph, if not, repeat. when you get it where you want it put in a new center bolt and u-bolts and you're good. Hope this helps....
__________________
Thanks, Joe.. 1969 C/10, 348 C.I., 3X2 bbl. V8, 2004r , LWB. |
|
|
|
|
04-25-2014, 07:45 AM
|
#4 |
|
Watch out for your cornhole !
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: leveling stance
Or you could call Early Classic Enterprises and order a pair of their 2 inch drop shackles. They bolt on in just a few minutes with basic tools.
__________________
I'm on the Instagram- @Gearhead_Kevin |
|
|
|
|
04-25-2014, 07:40 PM
|
#5 |
|
Registered User
Join Date: Jun 2011
Location: chillicothe mo
Posts: 225
|
Re: leveling stance
thanks for the help guys
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
