NOS hub caps on Ebay

[firemanjimtfd]

I bet these go high.


http://www.ebay.com/itm/NOS-64-65-66...9bd99d&vxp=mtr

[1963c-10]

very nice

[oem4me]

I don't have my parts book handy, but I think those may be slightly "thinner" than a C-10 hubcap. That is, the profile may not be as deep. Check that out before bidding.

[1963c-10]

Im more familiar with the 61-63 caps, but normally chevy had higher standards than this....can the 64-66 guys chime in on it. I know they were probably stenciled, but just seems off a bit. I've just never seen a 61-63 cap that off from the factory.

[factorystock]

When it comes to hubcaps, always do your research! Get the measurements of back sides first. Those are the smaller G 10 van hubcaps that will not fit C 10 pickups.

[factorystock]

Originally Posted by 1963c-10

Im more familiar with the 61-63 caps, but normally chevy had higher standards than this....

GM was not in the business of building show cars.

[1963c-10]

Originally Posted by factorystock

GM was not in the business of building show cars.

i understand that, but normally their quality control was better than that. maybe someone was sleeping on the line.

[TJ's Chevy]

5 days 19 hours and the bids already at 250 something! LOL! Heck yeah these are gonna go over 300 I'll bet! Nice caps to!

[jayoldschool]

My knowledge is limited to the chrome caps, but if the painted ones are the same (and I suspect they are), those are 66 only caps. The difference is in the raised ring around the center emblem.

[63burban]

Just remember that the NOS parts you see now are most likely seconds off the line. I bought a bunch of NOS parts in the 70s and they all had imperfections. The dealer I bought them from told me they were rejects off the line.

[factorystock]

Originally Posted by jayoldschool

those are 66 only caps. The difference is in the raised ring around the center emblem.

Correct, and the outline of the "spinner" is also raised. The '64-
'65 hubcap is not reproduced, just the '66 is reproduced. One of the first things I look for on a restored '64-'65. Here is the correct for '64-'65 C 10 pickup hubcaps ( must be 10 1/4" for standard bump wheels).http://www.ebay.com/itm/1964-1966-CH...36e054&vxp=mtr

[factorystock]

Originally Posted by firemanjimtfd

I bet these go high.


http://www.ebay.com/itm/NOS-64-65-66...9bd99d&vxp=mtr

If your restoring a G 10 van, $356 may be a bargain, these caps are not reproduced.