IN 1972 Big Block Valve Covers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Todd68Chevy** · 05-05-2014, 09:17 PM

----SOLD----
I have a pair of valve covers off of a 1972 402. They are in good shape except a couple dents. $35.00 plus shipping

70stovebolt has first chance and if he passes then the first I take will get it. If you have questions or want more picturs just ask.

**Todd68Chevy** · 05-05-2014, 09:19 PM

A few more pictures.

**70STOVEBOLT** · 05-05-2014, 09:33 PM

Todd what is shipping to 46562? Also, are the flanges straight? Mine have had the bolts over tightened and are bent up. And finally, do you have all of the plastic plug wire clips?

Thanks,
Mark

**Todd68Chevy** · 05-05-2014, 09:44 PM

Quote:

Originally Posted by 70STOVEBOLT

Todd what is shipping to 46562? Also, are the flanges straight? Mine have had the bolts over tightened and are bent up. And finally, do you have all of the plastic plug wire clips?

Thanks,
Mark

Shipping would be $9.60. The flanges look pretty good. There are a couple waves but look pretty good to me. I will try to get a couple pictures but not sure if I can show it in a picture. Thanks

**Todd68Chevy** · 05-06-2014, 08:43 PM

Here are some pictures of the gasket rail area. One spot at the end that needs straightened.

**Todd68Chevy** · 05-06-2014, 08:45 PM

One more picture of the worse spot.

**70STOVEBOLT** · 05-06-2014, 10:12 PM

Todd I am going to pass on these, I see they do not have the oil drippers on the inside. I know they are not absolutely necessary, but I am using stamped steel rockers, so I will straighten mine and use them. Thank you for taking the time to take all those pics and post them.

Thanks,
Mark

**Todd68Chevy** · 05-06-2014, 10:32 PM

Quote:

Originally Posted by 70STOVEBOLT

Todd I am going to pass on these, I see they do not have the oil drippers on the inside. I know they are not absolutely necessary, but I am using stamped steel rockers, so I will straighten mine and use them. Thank you for taking the time to take all those pics and post them.

Thanks,
Mark

No problem, Thanks for letting me know.

05-05-2014, 09:17 PM	#1
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	1972 Big Block Valve Covers ----SOLD---- I have a pair of valve covers off of a 1972 402. They are in good shape except a couple dents. $35.00 plus shipping 70stovebolt has first chance and if he passes then the first I take will get it. If you have questions or want more picturs just ask. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts. Last edited by Todd68Chevy; 09-13-2014 at 09:30 PM.

05-05-2014, 09:19 PM	#2
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: 1972 Big Block Valve Covers A few more pictures. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

05-05-2014, 09:33 PM	#3
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,353	Re: 1972 Big Block Valve Covers Todd what is shipping to 46562? Also, are the flanges straight? Mine have had the bolts over tightened and are bent up. And finally, do you have all of the plastic plug wire clips? Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

05-06-2014, 08:43 PM	#5
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: 1972 Big Block Valve Covers Here are some pictures of the gasket rail area. One spot at the end that needs straightened. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

05-06-2014, 08:45 PM	#6
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: 1972 Big Block Valve Covers One more picture of the worse spot. Attached Images __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

05-06-2014, 10:12 PM	#7
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,353	Re: 1972 Big Block Valve Covers Todd I am going to pass on these, I see they do not have the oil drippers on the inside. I know they are not absolutely necessary, but I am using stamped steel rockers, so I will straighten mine and use them. Thank you for taking the time to take all those pics and post them. Thanks, Mark

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.