|
05-08-2014, 02:37 PM
|
#1 |
|
Registered User
Join Date: Jul 2005
Location: austin texas
Posts: 113
|
WTB: 235 Flywheel
I have a 55-56 235 and the original flywheel has hairline cracks and missing teeth. Having a hard time sourcing one locally, anyone have one for sale? truck will be 12 volt so I believe I need the 138 tooth. Thanks in advance.
-Travis |
|
|
|
05-08-2014, 06:44 PM
|
#2 |
|
Hollister Road Co.
Join Date: Apr 2005
Location: Houston
Posts: 6,134
|
Re: WTB: 235 Flywheel
I would get the flywheel ground, heat checking ( cracks) is common in flywheels and not an issue as long as they are not to deep. The ring can be gotten at rockauto.com
ATP Part # ZA500 and should be 168. The 6 volt ring gear has 139 teeth and the 12 volt ring gear has 168 teeth |
|
|
|
|
05-08-2014, 07:17 PM
|
#3 |
|
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,498
|
Re: WTB: 235 Flywheel
Napa says it should have a 168 tooth flywheel. http://www.napaonline.com/Catalog/Ca...151_0359617202
You should be able to have it surfaced if the cracks aren't very deep. Check with Austin Brake and Clutch supply http://www.austinbrake.com/ I'd think that they can surface the flywheel and probably fix you up with the ring gear and the rest of the clutch.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
05-09-2014, 11:25 AM
|
#4 |
|
Registered User
Join Date: Jul 2005
Location: austin texas
Posts: 113
|
Re: WTB: 235 Flywheel
Thanks for the replys
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
