Weird noise under dash, sounds like blower motor but isen't?

[mountie]

Part # 16 or #21..... Remove glovebox..... It's not too difficult but just be patient getting to the actuator. Remove actuator, keep it plugged in.... adjust temp control & watch if the actuator turns.... When re-attaching it.....

The important thing is be SURE you align the motor actuator CENTERED onto the 'key' on the airbox.
Actuator motor is female... 'key' is male..... You will have to attach the motor with being 'firm'....pressing downward against the shape of the airbox, THEN lightly press onto the box key. If you don't do this, you can miss the center.

Looking at the motor & key on the box, you will know what I mean.

There is a poor design mounting the motor.... the box section BELOW the actuator box has a moulded shape , that makes the actuator snug against the upper box.

Part # 22..... sits on top of a part of the lower airbox, that sticks out a bit, ...this is where you have to 'rub against, to line the actuator square to the key. ( You'll see )..... Be patient..... It took me 3 times to realize I had to put "a little english" mounting it, to center the parts.