The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > LSx Classifieds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-03-2014, 01:31 PM   #1
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
DBW pedal mounting bracket

DBW mounting bracket for Corvette Pedal

$60 Shipped via USPS (updated 10/4/2022)

Paypal: robhartley@aol.com, enter "CPB" in message block.


I did an LS3 (Gen IV motor) installation in my 1968 C10 a while back. When I got to the point of mounting the DBW pedal, I fabbed up this pedal bracket that bolts to the firewall where the factory pedal used to mount. The bracket is made out of 1/4" steel and has the holes punched in them for ease of installation.

It is set up to use a 2005+ Corvette DBW pedal (GM Part # 25835421) that can be purchased on Ebay for around $50-75. The color code of the Corvette pedal is the same as the Gen IV truck DBW pedal, you just have to swap 2 wires (I'll look those up and post). The nice part about the Corvette pedal, is that the pad is exactly identical to the gas pedal pad in the 71-72 trucks. This allows you can to use the factory stainless trim on it giving you a clean factory look. The pedal bracket is $50 shipped. If you have any questions let me know.

Rob

**************
GEN III truck pedal brackets can be found here: http://67-72chevytrucks.com/vboard/s...d.php?t=651123
**************
Attached Images
   

Last edited by Hart_Rod; 10-04-2022 at 10:53 AM.
Hart_Rod is offline   Reply With Quote
Old 06-04-2014, 07:21 PM   #2
SeTx67
Registered User
 
SeTx67's Avatar
 
Join Date: May 2013
Location: Lumberton, TX
Posts: 795
Re: DBW pedal mounting bracket

Does the pedal arm bottom out on the floorboard at wot? What's your paypal?
__________________
67 SWB LS2/4l70e... http://67-72chevytrucks.com/vboard/s...d.php?t=587435
SeTx67 is offline   Reply With Quote
Old 06-05-2014, 01:10 PM   #3
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: DBW pedal mounting bracket

Quote:
Originally Posted by SeTx67 View Post
Does the pedal arm bottom out on the floorboard at wot? What's your paypal?
No interference. It is placed to get full throw on the pedal. PM sent.

Last edited by Hart_Rod; 06-19-2014 at 09:01 AM.
Hart_Rod is offline   Reply With Quote
Old 06-05-2014, 01:29 PM   #4
SeTx67
Registered User
 
SeTx67's Avatar
 
Join Date: May 2013
Location: Lumberton, TX
Posts: 795
Re: DBW pedal mounting bracket

Thanks for the info and all your help. PM replied
__________________
67 SWB LS2/4l70e... http://67-72chevytrucks.com/vboard/s...d.php?t=587435
SeTx67 is offline   Reply With Quote
Old 06-06-2014, 01:55 AM   #5
neal64ss
Registered User
 
Join Date: Mar 2014
Location: Russellville, AR
Posts: 81
Re: DBW pedal mounting bracket

Whats the part number on that corvette pedal?
neal64ss is offline   Reply With Quote
Old 06-06-2014, 03:01 AM   #6
jackyl9999
Registered User
 
jackyl9999's Avatar
 
Join Date: Feb 2003
Location: Paragould, Ar
Posts: 571
Re: DBW pedal mounting bracket

I would like one of these brackets. Can you send me your paypal Info.


Also interested in the Corvette pedal p/n if anyone has it.
__________________
1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e)

1990 K1500 Daily

jackyl9999 is offline   Reply With Quote
Old 06-06-2014, 09:28 AM   #7
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: DBW pedal mounting bracket

Quote:
Originally Posted by neal64ss View Post
Whats the part number on that corvette pedal?
25835421

Quote:
Originally Posted by jackyl9999 View Post
I would like one of these brackets. Can you send me your paypal Info.


Also interested in the Corvette pedal p/n if anyone has it.
25835421

I added the part number to the my first post.

Paypal is robhartley@aol.com. I pick up a new batch early next week, so it will be toward the end of next week before I ship it out. Thanks,

Rob
Hart_Rod is offline   Reply With Quote
Old 06-06-2014, 11:09 AM   #8
jackyl9999
Registered User
 
jackyl9999's Avatar
 
Join Date: Feb 2003
Location: Paragould, Ar
Posts: 571
Re: DBW pedal mounting bracket

That will work fine for me. Paypal payment sent.
__________________
1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e)

1990 K1500 Daily

jackyl9999 is offline   Reply With Quote
Old 06-06-2014, 12:21 PM   #9
KMC3420
Registered User
 
KMC3420's Avatar
 
Join Date: Dec 2012
Location: Harrison, AR
Posts: 1,069
Re: DBW pedal mounting bracket

So you only have to switch 2 wires to run this on a 04 5.3 motor?
__________________
Keagan
68 SWB C-10 original 350 A/C 503 Mean Green
KMC3420 is offline   Reply With Quote
Old 06-06-2014, 12:48 PM   #10
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: DBW pedal mounting bracket

Quote:
Originally Posted by jackyl9999 View Post
That will work fine for me. Paypal payment sent.
Thanks!

Quote:
Originally Posted by KMC3420 View Post
So you only have to switch 2 wires to run this on a 04 5.3 motor?
If you want to use the Corvette pedal. Post a picture of your DBW plug.
Hart_Rod is offline   Reply With Quote
Old 06-08-2014, 09:32 AM   #11
KMC3420
Registered User
 
KMC3420's Avatar
 
Join Date: Dec 2012
Location: Harrison, AR
Posts: 1,069
Re: DBW pedal mounting bracket

I don't have my pedal yet. I have an 04 5.3. Just trying to plan this out and the pedal you have is the best pedal I have seen so far.
__________________
Keagan
68 SWB C-10 original 350 A/C 503 Mean Green
KMC3420 is offline   Reply With Quote
Old 06-08-2014, 02:21 PM   #12
mutt_1986
Registered User
 
Join Date: Jul 2008
Location: El Dorado, Ar
Posts: 10
Re: DBW pedal mounting bracket

I already have an 04 truck pedal. Will this bracket work
mutt_1986 is offline   Reply With Quote
Old 06-08-2014, 08:22 PM   #13
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: DBW pedal mounting bracket

Quote:
Originally Posted by mutt_1986 View Post
I already have an 04 truck pedal. Will this bracket work
Can you post a picture of your pedal and the connector?
Hart_Rod is offline   Reply With Quote
Old 06-11-2014, 09:44 AM   #14
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: DBW pedal mounting bracket

Quote:
Originally Posted by KMC3420 View Post
I don't have my pedal yet. I have an 04 5.3. Just trying to plan this out and the pedal you have is the best pedal I have seen so far.
I'm pretty sure the Corvette pedal will work, but I haven't tried it. Maybe do a little research on LS1Tech and see what you can find. I'll look also.

Quote:
Originally Posted by mutt_1986 View Post
I already have an 04 truck pedal. Will this bracket work
As is, if you mount the truck pedal to the bracket, I think it will push the pedal to far towards the driver. I'm going to do some more prototyping with the truck pedal to see what I can come up with.

Quote:
Originally Posted by jackyl9999 View Post
That will work fine for me. Paypal payment sent.
Steve - you pedal bracket will be shipped USPS today. Thanks,
Hart_Rod is offline   Reply With Quote
Old 06-19-2014, 09:43 AM   #15
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: DBW pedal mounting bracket

Another picture of the setup.
Attached Images
 
Hart_Rod is offline   Reply With Quote
Old 06-19-2014, 09:46 AM   #16
jackyl9999
Registered User
 
jackyl9999's Avatar
 
Join Date: Feb 2003
Location: Paragould, Ar
Posts: 571
Re: DBW pedal mounting bracket

Good Deal!


Thanks!!!
__________________
1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e)

1990 K1500 Daily

jackyl9999 is offline   Reply With Quote
Old 06-22-2014, 09:46 AM   #17
chevyguy_72
Vintage Evil
 
chevyguy_72's Avatar
 
Join Date: Aug 2005
Location: Broomfield, CO
Posts: 956
Re: DBW pedal mounting bracket

I ordered one of these and it arrived promptly... Its a very nice heavy duty piece... plan on installing it with the vette pedal assembly this week
__________________
Current Rides:
Vintage Evil - 72 Chevy C10 (Always a work in progress) Vintage Evil Build Thread
EvilK5 - 71 K5 Blazer
Evil Twin - 2006 Suzuki M109R
EvilDmax- 2018 GMC 2500 Denali Duramax
chevyguy_72 is offline   Reply With Quote
Old 06-29-2014, 02:18 AM   #18
4x4k30
Registered User
 
4x4k30's Avatar
 
Join Date: Jun 2003
Location: ga
Posts: 630
Re: DBW pedal mounting bracket

do you have a bracket for the 73 up ? I got a 77 with a 6.0 dbw pedal mine sets to high
__________________
4x4k30 if trouble was money i would have plenty
4x4k30 is offline   Reply With Quote
Old 06-29-2014, 05:15 PM   #19
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: DBW pedal mounting bracket

Quote:
Originally Posted by chevyguy_72 View Post
I ordered one of these and it arrived promptly... Its a very nice heavy duty piece... plan on installing it with the vette pedal assembly this week
Thanks!

Quote:
Originally Posted by jackyl9999 View Post
Good Deal!


Thanks!!!
Thank you!

Quote:
Originally Posted by 4x4k30 View Post
do you have a bracket for the 73 up ? I got a 77 with a 6.0 dbw pedal mine sets to high
Can you post pictures of where the pedal would mount?
Hart_Rod is offline   Reply With Quote
Old 06-29-2014, 09:08 PM   #20
4x4k30
Registered User
 
4x4k30's Avatar
 
Join Date: Jun 2003
Location: ga
Posts: 630
Re: DBW pedal mounting bracket

my pedal is even with the brake pedal and its a truck pedal with no sweivel my foot gets tired here are a couple fuzzy pics I used the factory 2500hd pedal mount I just lowered it a little and drilled new holes
Attached Images
  
__________________
4x4k30 if trouble was money i would have plenty

Last edited by 4x4k30; 06-29-2014 at 09:13 PM.
4x4k30 is offline   Reply With Quote
Old 06-29-2014, 09:48 PM   #21
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: DBW pedal mounting bracket

Quote:
Originally Posted by 4x4k30 View Post
my pedal is even with the brake pedal and its a truck pedal with no sweivel my foot gets tired here are a couple fuzzy pics I used the factory 2500hd pedal mount I just lowered it a little and drilled new holes
Thanks for the pics. I'm going to have to find a local truck and do some measuring.
Hart_Rod is offline   Reply With Quote
Old 06-30-2014, 11:01 AM   #22
Houston Ben
Registered User
 
Houston Ben's Avatar
 
Join Date: May 2013
Location: Houston Texas
Posts: 713
Re: DBW pedal mounting bracket

Hey Hart Rod,
Was busy and didn't get a chance to take a pic of my 86' and now im out of town. I hope these work for the square body trucks!! Looking forward to your findings!
Houston Ben is offline   Reply With Quote
Old 07-21-2014, 04:21 AM   #23
jackyl9999
Registered User
 
jackyl9999's Avatar
 
Join Date: Feb 2003
Location: Paragould, Ar
Posts: 571
Re: DBW pedal mounting bracket

Hart rod,
Do you happen to have a link to the info for repinning the DBW plug so I can use the vette pedal?

I am about ready to dive into this part of the project. I have looked on here and Ls1tech and was not able to find anything.
__________________
1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e)

1990 K1500 Daily

jackyl9999 is offline   Reply With Quote
Old 07-26-2014, 10:39 AM   #24
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,856
Re: DBW pedal mounting bracket

Quote:
Originally Posted by Houston Ben View Post
Hey Hart Rod,
Was busy and didn't get a chance to take a pic of my 86' and now im out of town. I hope these work for the square body trucks!! Looking forward to your findings!
I think they will but I just got back from a week long mission trip to Haiti, so I haven't had time to dig more into it. Hopefully this week or next.

Quote:
Originally Posted by jackyl9999 View Post
Hart rod,
Do you happen to have a link to the info for repinning the DBW plug so I can use the vette pedal?

I am about ready to dive into this part of the project. I have looked on here and Ls1tech and was not able to find anything.
I will try to get some pictures taken today or tomorrow to show the difference. Bump this to the top if I haven't by tomorrow evening.
Hart_Rod is offline   Reply With Quote
Old 07-29-2014, 10:04 AM   #25
jackyl9999
Registered User
 
jackyl9999's Avatar
 
Join Date: Feb 2003
Location: Paragould, Ar
Posts: 571
Re: DBW pedal mounting bracket

Bump
__________________
1970 Gmc Grande Sierra Swb 2wd LSX (LQ4/4L80e)

1990 K1500 Daily

jackyl9999 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:55 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com