![]() |
![]() |
#1 |
Registered User
Join Date: May 2014
Location: Catchall
Posts: 120
|
carb help....
howdy,
Im in the process of taking apart my Rochester Monojet carb. for cleaning/rebuild. What i can't figure out is how to take off the connector rods. They each have a pin on the ends. Thanks for any insights/techniques. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2005
Location: Overland Park, Ks.
Posts: 5,216
|
Re: carb help....
You have already removed the screw. Pry off the plate & the rod will come out of the power piston rod. Then turn it enough to remove the rod from the accel pump lever.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: May 2014
Location: Catchall
Posts: 120
|
Re: carb help....
Thanks for the response. Looking at it im not sure what you meant by "pry off the plate".
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: May 2014
Location: Catchall
Posts: 120
|
Re: carb help....
AHHH ! just put some elbow grease on it and the plate popped off thank you!
|
![]() |
![]() |
![]() |
#5 | ||
"I ain't nobody, dork."
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,939
|
Re: carb help....
The goofy "heart" shaped plate that the rod goes into. Put a flat blade screwdriver between it and the carb body and give a little twist/pry. It will come right off the shaft. Once you get it off the shaft, everything else will be self explanatary to remove the rods.
Gary EDIT: I see you got it done while I was posting. Great! ![]()
__________________
'cuz chicks dig scars... My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread. The Rebuild of Creeping Death after the wreck Quote:
Quote:
Last edited by GASoline71; 06-10-2014 at 03:42 PM. Reason: Added more |
||
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|