Picture request, C20s with 2500HD Rims! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**John Fabris** · 09-15-2006, 04:05 PM

Hi All,

Have a buddy that wants to puts some chrome wheels on his truck, a 67 C20 worktruck, and I told him about using the chevy 2500HD rims like I have seen on Wes's truck and Chickenwing's truck. Was hoping to find some pictures of our trucks with these rims to show my buddy. Thanks!!!!

Aarons72s · 09-15-2006, 11:27 PM

I agree I would like to see that too! Here is a bump.

mcw1 · 09-15-2006, 11:53 PM

Here's a pic of my '69 with late model 8 lug wheels and GMC center caps. I haven't figured out how to get the rear caps mounted yet, as they don't fit over my hubs. I even tried going to a dually center cap, but to get them to fit I have to put a 1/4" washer on the lug before I put on the lug nut.

cheyenne10 · 09-16-2006, 01:02 AM

Here are a couple I have.

**PICKMUP** · 09-16-2006, 12:23 PM

Those do look good and they are cheap! I don't see the big problem with the new offset, that some people are complaining about. They seem to set in the wheel wells just about right.
Anyone have any inside clearance problems? I have run the new steel ralley wheels for years without trouble.

72freak · 09-16-2006, 03:15 PM

hummer wheels

cheyenne10 · 09-16-2006, 03:32 PM

I remember that picture of your burb with hummer wheels. I wonder if they would work on 3/4 ton 4x4 too? Hmmmmmmmm. Might need 2 sets of tires/wheels!!

**Canadian694x4** · 09-17-2006, 03:20 AM

Quote:

Originally Posted by cheyenne10

I remember that picture of your burb with hummer wheels. I wonder if they would work on 3/4 ton 4x4 too? Hmmmmmmmm. Might need 2 sets of tires/wheels!!

I can't seem to find a picture but IIRC Board Member "Brewski" had them on his '72 GMC 3/4 Ton 4x4 for a while.

LUV2XCLR8 · 09-17-2006, 07:16 AM

I remember that also, but can't find the pic's either

**John Fabris** · 09-18-2006, 11:38 PM

OK, next question, What did you do for the lugnuts size difference? We found a set and they are going on a 67 3/4 longbed, and noticed that the lugnuts that came with the rims are bigger then the factory 67 studs. Did you find new lugnuts or replace the studs with bigger studs...

cheyenne10 · 09-18-2006, 11:53 PM

I bought a set of 32 nuts off of ebay. There is a dealer on there. Right around $42 shipped if I remember. Reputable local tire store (Les Schwab) just stared at me with blank stare and said not available. The fake plastic covers screw onto regular nuts for look. The inside thread is standard threads to fit our studs and outsides are metric to fit caps.

I beleive these are the ones I got.
http://cgi.ebay.com/ebaymotors/Wheel...spagenameZWDVW

**John Fabris** · 09-19-2006, 12:18 AM

Hey Cheyenne10, do you have that ebay sellers name?

mikewarme · 06-15-2011, 09:36 AM

Quote:

Originally Posted by cheyenne10

Here are a couple I have.

Do you remember if that truck had the large hub from the floating rear axle? I want to use those wheels on my 69 but fear the caps won't fit with my axle.

AZ1970k20 · 06-27-2014, 09:56 AM

Hey Guys,

I am just in the process of putting the 2500 rims on my 70 K20. On my truck,I need 1/2 20 thread (not sure if that is stock), and the lugs that came with the rims where metric.

I found the following lugs at Napa that work for the caps. Just wanted to share my find.

Part Number: NOE 6414237
http://www.napaonline.com/Catalog/Ca...237_0437516167

**FirstOwner69** · 06-27-2014, 10:47 AM

Quote:

Originally Posted by AZ1970k20

Hey Guys,

I am just in the process of putting the 2500 rims on my 70 K20. On my truck,I need 1/2 20 thread (not sure if that is stock), and the lugs that came with the rims where metric.

I found the following lugs at Napa that work for the caps. Just wanted to share my find.

Part Number: NOE 6414237
http://www.napaonline.com/Catalog/Ca...237_0437516167

1/2"-20 is stock for the 1970 3/4 ton. Here is an eBay listing for what you need. http://www.ebay.com/itm/32-LUG-NUTS-...item46216ed5a1 I see you are in the Phoenix area. I bought a set of these at the monthly(?) swap meet at Glendale Community College. I believe it was from this eBay seller. At least his sign said Lug Nut King.

airdale94 · 06-27-2014, 12:11 PM

It must be the Dana axles that the center caps won't fit, because mine fit on both the H052 and the 14bolt I swapped.

**FirstOwner69** · 06-27-2014, 09:12 PM

Quote:

Originally Posted by airdale94

It must be the Dana axles that the center caps won't fit, because mine fit on both the H052 and the 14bolt I swapped.

True. I put Hummer H2 wheels on mine with an Eaton without a problem with the caps. Davepl used the same wheels and caps on his 70 with a Dana and had to use spacers in the rear to get the caps to fit.

AZ1970k20 · 06-29-2014, 10:47 PM

Thanks everyonel

OhioDan · 06-30-2014, 08:44 AM

Had to use 1 1/4" spacers between drums and rims on my Dana 60 to get centers to work. I also purchased 1/2X20 lug nuts from "Lug Nut King" to mount new rallies on my 70 GMC.

**Classic Heartbeat** · 06-30-2014, 12:51 PM

The "Garden Truck" has 2005 Wheels and tires. WES

zellway · 06-30-2014, 01:02 PM

When I was looking around I found a set of Dodge ones that worked out nice. I will be installing bowties over the rams caps.

Just a diffrent option. I even got to run all the lugs.

09-15-2006, 04:05 PM	#1
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Picture request, C20s with 2500HD Rims! Hi All, Have a buddy that wants to puts some chrome wheels on his truck, a 67 C20 worktruck, and I told him about using the chevy 2500HD rims like I have seen on Wes's truck and Chickenwing's truck. Was hoping to find some pictures of our trucks with these rims to show my buddy. Thanks!!!! __________________ John Fabris 67 C10 SWB

09-15-2006, 11:27 PM	#2
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,670	Re: Picture request, C20s with 2500HD Rims! I agree I would like to see that too! Here is a bump.

09-15-2006, 11:53 PM	#3
mcw1 Registered User Join Date: Jun 2006 Location: Fredericksburg, TX Posts: 9	Re: Picture request, C20s with 2500HD Rims! Here's a pic of my '69 with late model 8 lug wheels and GMC center caps. I haven't figured out how to get the rear caps mounted yet, as they don't fit over my hubs. I even tried going to a dually center cap, but to get them to fit I have to put a 1/4" washer on the lug before I put on the lug nut. Attached Images __________________ '72 K5 Blazer, waiting to start engine! '69 GMC 3/4 Custom Camper '69 C10 Stepside

09-16-2006, 01:02 AM	#4
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	Re: Picture request, C20s with 2500HD Rims! Here are a couple I have. Attached Images __________________ Bob

09-16-2006, 12:23 PM	#5
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,126	Re: Picture request, C20s with 2500HD Rims! Those do look good and they are cheap! I don't see the big problem with the new offset, that some people are complaining about. They seem to set in the wheel wells just about right. Anyone have any inside clearance problems? I have run the new steel ralley wheels for years without trouble.

09-16-2006, 03:15 PM	#6
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: Picture request, C20s with 2500HD Rims! hummer wheels Attached Images

09-16-2006, 03:32 PM	#7
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	Re: Picture request, C20s with 2500HD Rims! I remember that picture of your burb with hummer wheels. I wonder if they would work on 3/4 ton 4x4 too? Hmmmmmmmm. Might need 2 sets of tires/wheels!! __________________ Bob

09-17-2006, 07:16 AM	#9
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,476	Re: Picture request, C20s with 2500HD Rims! I remember that also, but can't find the pic's either __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

09-18-2006, 11:38 PM	#10
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: Picture request, C20s with 2500HD Rims! OK, next question, What did you do for the lugnuts size difference? We found a set and they are going on a 67 3/4 longbed, and noticed that the lugnuts that came with the rims are bigger then the factory 67 studs. Did you find new lugnuts or replace the studs with bigger studs... __________________ John Fabris 67 C10 SWB

09-18-2006, 11:53 PM	#11
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	Re: Picture request, C20s with 2500HD Rims! I bought a set of 32 nuts off of ebay. There is a dealer on there. Right around $42 shipped if I remember. Reputable local tire store (Les Schwab) just stared at me with blank stare and said not available. The fake plastic covers screw onto regular nuts for look. The inside thread is standard threads to fit our studs and outsides are metric to fit caps. I beleive these are the ones I got. http://cgi.ebay.com/ebaymotors/Wheel...spagenameZWDVW __________________ Bob Last edited by cheyenne10; 09-19-2006 at 12:22 AM.

09-19-2006, 12:18 AM	#12
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: Picture request, C20s with 2500HD Rims! Hey Cheyenne10, do you have that ebay sellers name? __________________ John Fabris 67 C10 SWB

06-27-2014, 09:56 AM	#14
AZ1970k20 Registered User Join Date: Jun 2014 Location: Scottsdale Az Posts: 6	Re: Picture request, C20s with 2500HD Rims! Hey Guys, I am just in the process of putting the 2500 rims on my 70 K20. On my truck,I need 1/2 20 thread (not sure if that is stock), and the lugs that came with the rims where metric. I found the following lugs at Napa that work for the caps. Just wanted to share my find. Part Number: NOE 6414237 http://www.napaonline.com/Catalog/Ca...237_0437516167

06-27-2014, 12:11 PM	#16
airdale94 Registered User Join Date: Jan 2007 Location: Topeka,KS Posts: 778	Re: Picture request, C20s with 2500HD Rims! It must be the Dana axles that the center caps won't fit, because mine fit on both the H052 and the 14bolt I swapped. __________________ 68' C20. 283CI w/55CC 305HO heads, NP435 Close Ratio, Corp. 14 bolt FF 3.21, 75' front end swap (everything but the X-member).

06-29-2014, 10:47 PM	#18
AZ1970k20 Registered User Join Date: Jun 2014 Location: Scottsdale Az Posts: 6	Re: Picture request, C20s with 2500HD Rims! Thanks everyonel

06-30-2014, 08:44 AM	#19
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	Re: Picture request, C20s with 2500HD Rims! Had to use 1 1/4" spacers between drums and rims on my Dana 60 to get centers to work. I also purchased 1/2X20 lug nuts from "Lug Nut King" to mount new rallies on my 70 GMC. Attached Images __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.



Register or Log In To remove these advertisements.

06-30-2014, 12:51 PM	#20
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Re: Picture request, C20s with 2500HD Rims! The "Garden Truck" has 2005 Wheels and tires. WES Attached Images __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

06-30-2014, 01:02 PM	#21
zellway Registered User Join Date: Dec 2009 Location: Arizona City, AZ Posts: 747	Re: Picture request, C20s with 2500HD Rims! When I was looking around I found a set of Dodge ones that worked out nice. I will be installing bowties over the rams caps. Just a diffrent option. I even got to run all the lugs. Attached Images __________________ ----------------------------------------------------------- Erik My 69 suburban http://67-72chevytrucks.com/vboard/s...d.php?t=530626 1970 C10 step Project Jiminy http://67-72chevytrucks.com/vboard/s...d.php?t=682647 RUST!? Thats just mother natures way of telling all of us.....MINE!!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.