The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-11-2004, 01:19 PM   #1
71swb4x4
Senior Member
 
71swb4x4's Avatar
 
Join Date: Nov 2003
Location: Brookings, SD
Posts: 10,497
Blazer top dented???

I have found a Blazer with a decent top on it. Only problem is that there are a few spots on the top of it that are sunk in a little, like someone or something may have been on the top. Is this normal?

Shawn
__________________
Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.
71swb4x4 is offline   Reply With Quote
Old 01-11-2004, 02:14 PM   #2
Classic Heartbeat
Project Junkie! Fishing Poor!!
 
Classic Heartbeat's Avatar
 
Join Date: Dec 1999
Location: Olympia,Wa. 98512
Posts: 10,768
Yes that is normal. The double wall tops do it worse than the single wall tops though. WES www.ClassicHeartbeat.com
__________________
On-line catolog
Classic Heartbeat Pickup Parts
WEHEPP@comcast.net
Call us Toll Free (888) 338-2502
Like Us on Facebook
No appointment necessary.
72 BB Chevy Custom Deluxe / Custom Camper
67 I-6 (Soon to be 5.7 LS1) Panel
68 BB Chevy Short Bed
72 6.0 LQ9 Short Bed Chevy 4X4
Olympia's fastest growing truck parts supplier.
Olympia's home for Wayward Chevys
Classic Heartbeat is offline   Reply With Quote
Old 01-11-2004, 02:17 PM   #3
FRENCHBLUE72
PROJECT 7DEUCE
 
FRENCHBLUE72's Avatar
 
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
Hey wes is there anything that can be injected in between the pannel's to raise the roof back up(like expanding foam)???
__________________
GO BIG GREEN GO DUCKS



MEMBER #6377

72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free.

Project "7DEUCE"

check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665



Tim Powell..R.I.P EastSideLowlife..... R.I.P..
FRENCHBLUE72 is offline   Reply With Quote
Old 01-11-2004, 03:56 PM   #4
72BLAZERDUDE
Registered User
 
72BLAZERDUDE's Avatar
 
Join Date: Jan 2002
Location: WATAUGA,TX
Posts: 675
The problem is that the outer skin on a double wall is probably much harder and brittle then the inner skin. I thought about doing the same thing on mine but it would be real hard to control the expansion and Im afraid it might cause the inside to bulge.
__________________
72 2wd 307/AT/AC/TILT WHEEL
78 JIMMY HIGH SIERRA
72BLAZERDUDE is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:28 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com