KS 1972 chevy C10 with a 4speed getting parted now - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ozzy2013 · 08-15-2014, 11:30 PM

You wouldn't happen to have a tilt column would you/Or enough parts to build one?Ha ha figured id ask.

teeitup · 08-15-2014, 11:41 PM

Ozzy, its a floor shift column. Your 68 may have the solid shaft all the way to steering box, if you have that kind you will need the intermediate shaft, thats another $20. Sorry no 4 speed tilts right now, they go for $400 plus when I get one of those in. I can get pics in morning

Thanks Randy

**70CHEVYBB** · 08-15-2014, 09:24 PM

how about the steering center link?

**DeadheadNM** · 08-16-2014, 10:47 AM

I'll take the visors - PM sent. Thanks.

**DeadheadNM** · 08-16-2014, 12:25 PM

Randy - I could also use the bracket that attaches the alternator base to the head on a SB motor. Looks like that in my K1500 has a repaired crack.

BLT gmc · 08-16-2014, 08:33 PM

Randy,
$ for spare tire holder and hardware? Is the bottom solid? Bruce

Jake1971 · 08-16-2014, 08:56 PM

Hey Randy, any luck on my wish list? LMK total to 78602. Thanks again

teeitup · 08-17-2014, 10:26 AM

Pete, sorry sold all my alt sets already

Oz, they are not bad to replace, I'll send info

Bruce, I need to get it out and check condition, I will try today

Paul, headed out there in a bit to look, sorry for delay

Thanks Randy

teeitup · 08-17-2014, 06:06 PM

BLT gmc, Bruce its solid $40 shipped

**JimH2828** · 08-17-2014, 06:22 PM

How's the heat stove and riser pipe?
Is it a 350.....how are the ignition wire mount and organizer brackets and parts?

Thanks
Jim

kcsa75 · 08-17-2014, 06:46 PM

Hey Randy, are the interior door panels still available? Shipped to 66215 or if you're going to be heading this way anytime soon, I could meet you somewhere in KC area.

BLT gmc · 08-17-2014, 08:21 PM

Randy,
I will take it. I will send USPS MO. Is the mounting hardware available?
Thank you, Bruce

teeitup · 08-17-2014, 09:01 PM

Bruce, sorry no mounting hardware. Thanks

jdfeliciano94 · 08-17-2014, 10:05 PM

Greetings,
If they are still available, how much do you want for the tailgate hinges including shipping.
Thanks,
JD

teeitup · 08-18-2014, 06:37 AM

JD, $21 shipped for them. Thanks Randy

ECU PIRATE · 08-18-2014, 10:16 AM

Randy,

How is the clutch linkage?

Thanks,

Mike

davem815 · 08-18-2014, 07:55 PM

Did you sell for mirrors, or are they still available?
Thanks, Dave

teeitup · 08-18-2014, 09:38 PM

Mike, I have one guy ahead of you on linkage

Dave, $20 plus shipping, one head and one upper arm missing

Thanks Randy

lynchiii · 08-19-2014, 10:36 PM

payment sent for the drag link.

Thanks again

**JJorgensen52** · 08-20-2014, 01:03 PM

Interested in a price/pics of the tailgate, if it's clean and straight. Didn't see anyone ask about it yet.

Thanks

wiggins · 08-20-2014, 02:16 PM

What shape is the pass door in? rust?

teeitup · 08-20-2014, 06:17 PM

$25 plus shipping for the black frame tinted pass wing window. I'm not sure condition of rubber seal, I can look if interested? Thanks

conman585 · 08-20-2014, 07:14 PM

Quote:

Originally Posted by teeitup

$25 plus shipping for the black frame tinted pass wing window. I'm not sure condition of rubber seal, I can look if interested? Thanks

I'm rebuilding mine and the bottom pivot is broken where the weld is. So I'm not too concerned about the quality of the rubber. In order to make shipping cheaper would you mind removing or sawzall-ing the division bar off right below the vent window? I only really need the metal window frame. Attached picture for clarification. Thanks [IMG]<a href="http://s612.photobucket.com/user/conman585/media/ventwindow.jpg.html" target="_blank"><img src="http://i612.photobucket.com/albums/tt201/conman585/ventwindow.jpg" border="0" alt=" photo ventwindow.jpg"/></a>[/IMG]

conman585 · 08-20-2014, 07:18 PM

davem815 · 08-20-2014, 08:53 PM

I'll pass on the mirror. I need the below eye line where the bottom mounting point on the door is lower. I haven't started on the project, so mirrors were way ahead of the game anyway.
Dave

08-15-2014, 11:30 PM	#1
Ozzy2013 Registered User Join Date: Oct 2013 Location: Elkton Posts: 693	Re: 1972 chevy C10 with a 4speed getting parted now You wouldn't happen to have a tilt column would you/Or enough parts to build one?Ha ha figured id ask.

08-15-2014, 11:41 PM	#2
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1972 chevy C10 with a 4speed getting parted now Ozzy, its a floor shift column. Your 68 may have the solid shaft all the way to steering box, if you have that kind you will need the intermediate shaft, thats another $20. Sorry no 4 speed tilts right now, they go for $400 plus when I get one of those in. I can get pics in morning Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-15-2014, 09:24 PM	#3
70CHEVYBB Senior Member Join Date: Feb 2012 Location: chillicothe, illinois Posts: 690	Re: 1972 chevy C10 with a 4speed getting parted now how about the steering center link?

08-16-2014, 10:47 AM	#4
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,453	Re: 1972 chevy C10 with a 4speed getting parted now I'll take the visors - PM sent. Thanks. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

08-16-2014, 12:25 PM	#5
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,453	Re: 1972 chevy C10 with a 4speed getting parted now Randy - I could also use the bracket that attaches the alternator base to the head on a SB motor. Looks like that in my K1500 has a repaired crack. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

08-16-2014, 08:33 PM	#6
BLT gmc Registered User Join Date: Feb 2014 Location: West Iowa Posts: 1,106	Re: 1972 chevy C10 with a 4speed getting parted now Randy, $ for spare tire holder and hardware? Is the bottom solid? Bruce

08-16-2014, 08:56 PM	#7
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 699	Re: 1972 chevy C10 with a 4speed getting parted now Hey Randy, any luck on my wish list? LMK total to 78602. Thanks again __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

08-17-2014, 10:26 AM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1972 chevy C10 with a 4speed getting parted now Pete, sorry sold all my alt sets already Oz, they are not bad to replace, I'll send info Bruce, I need to get it out and check condition, I will try today Paul, headed out there in a bit to look, sorry for delay Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-17-2014, 06:06 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1972 chevy C10 with a 4speed getting parted now BLT gmc, Bruce its solid $40 shipped Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-17-2014, 06:22 PM	#10
JimH2828 Senior Member Join Date: Oct 2012 Location: Cumming GA Posts: 621	Re: 1972 chevy C10 with a 4speed getting parted now How's the heat stove and riser pipe? Is it a 350.....how are the ignition wire mount and organizer brackets and parts? Thanks Jim

08-17-2014, 06:46 PM	#11
kcsa75 Registered User Join Date: Oct 2010 Location: Kansas City Posts: 3,590	Re: 1972 chevy C10 with a 4speed getting parted now Hey Randy, are the interior door panels still available? Shipped to 66215 or if you're going to be heading this way anytime soon, I could meet you somewhere in KC area. __________________ Willie Swamp Angel Truckers '72 C10 Highlander *People who blindly follow a GPS end up on television programs on The Weather Channel. Some survive, some don't.*

08-17-2014, 08:21 PM	#12
BLT gmc Registered User Join Date: Feb 2014 Location: West Iowa Posts: 1,106	Re: 1972 chevy C10 with a 4speed getting parted now Randy, I will take it. I will send USPS MO. Is the mounting hardware available? Thank you, Bruce

08-17-2014, 09:01 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1972 chevy C10 with a 4speed getting parted now Bruce, sorry no mounting hardware. Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-17-2014, 10:05 PM	#14
jdfeliciano94 Registered User Join Date: Oct 2013 Location: lancaster, california Posts: 9	Re: 1972 chevy C10 with a 4speed getting parted now Greetings, If they are still available, how much do you want for the tailgate hinges including shipping. Thanks, JD

08-18-2014, 06:37 AM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1972 chevy C10 with a 4speed getting parted now JD, $21 shipped for them. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

08-18-2014, 10:16 AM	#16
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: 1972 chevy C10 with a 4speed getting parted now Randy, How is the clutch linkage? Thanks, Mike __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

08-18-2014, 07:55 PM	#17
davem815 Registered User Join Date: Jun 2013 Location: Warren, IN Posts: 313	Re: 1972 chevy C10 with a 4speed getting parted now Did you sell for mirrors, or are they still available? Thanks, Dave

08-18-2014, 09:38 PM	#18
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1972 chevy C10 with a 4speed getting parted now Mike, I have one guy ahead of you on linkage Dave, $20 plus shipping, one head and one upper arm missing Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-19-2014, 10:36 PM	#19
lynchiii Registered User Join Date: Aug 2012 Location: San Antonio Posts: 56	Re: 1972 chevy C10 with a 4speed getting parted now payment sent for the drag link. Thanks again

08-20-2014, 01:03 PM	#20
JJorgensen52 Simple? What's simple? Join Date: Apr 2007 Location: Southeast CT Posts: 1,472	Re: 1972 chevy C10 with a 4speed getting parted now Interested in a price/pics of the tailgate, if it's clean and straight. Didn't see anyone ask about it yet. Thanks __________________ CURRENT '50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build '63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos '66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos '69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!) '72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh '99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily) '99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs) SOLD '71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)

08-20-2014, 02:16 PM	#21
wiggins Registered User Join Date: Mar 2010 Location: Deep East TEXAS Posts: 453	Re: 1972 chevy C10 with a 4speed getting parted now What shape is the pass door in? rust? __________________ Preserving American History one truck at a time.

08-20-2014, 06:17 PM	#22
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1972 chevy C10 with a 4speed getting parted now $25 plus shipping for the black frame tinted pass wing window. I'm not sure condition of rubber seal, I can look if interested? Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-20-2014, 07:18 PM	#24
conman585 Registered User Join Date: Dec 2006 Location: Midlothian, TX Posts: 87	Re: 1972 chevy C10 with a 4speed getting parted now

08-20-2014, 08:53 PM	#25
davem815 Registered User Join Date: Jun 2013 Location: Warren, IN Posts: 313	Re: 1972 chevy C10 with a 4speed getting parted now I'll pass on the mirror. I need the below eye line where the bottom mounting point on the door is lower. I haven't started on the project, so mirrors were way ahead of the game anyway. Dave

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.