|
08-28-2014, 06:00 AM
|
#1 |
|
Registered User
Join Date: Jul 2011
Location: Moorpark, California
Posts: 159
|
Brake light problem
My 54 truck has only 1600 miles on it. The other day I noticed the brake lights work then don't work. The brake light switch is one of those waterproof kind. I got under the truck and when the brake lights did not work I touched the part that is against the brake arm and it worked. Then I come back later and try the brakes and no brake lights. I pump the brakes and they work. Then later they stop working. The taillights are fine no problems. All the wiring is new from Painless and everything else electrical works fine. Any ideas? Thanks.
|
|
|
|
08-28-2014, 06:29 AM
|
#2 |
|
Registered User
Join Date: Mar 2012
Location: Lakes Region NH
Posts: 3,200
|
Re: Brake light problem
Possibly the switch is failing?
|
|
|
|
|
08-28-2014, 10:55 AM
|
#3 |
|
Registered User
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,705
|
Re: Brake light problem
I'm not quite following what you are writing but it sounds like either your switch is going bad or you have a suspect contact between the wire end and the switch.
I'd take a look at the crimp on the wire end to make sure that it was tight on the wire and then make sure that the wire end was making good contact with the switch. If the switch has slide terminals rather than screw terminal you might want to squeeze the female slide terminal slightly so that it fits tighter on the switch.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
08-28-2014, 01:14 PM
|
#4 |
|
Registered User
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
|
Re: Brake light problem
Could also be the distance the plunger compresses or releases when the pedal arm moves, had the same issue with my 4wd selector switch. Moved it 1/16" and life is good.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
