NJ 700r4 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

beetle1960 · 09-11-2014, 12:36 PM

Quote:

Originally Posted by MidLifer

Sorry Beetle that's not enough to make me say yes.

counter offer? I dont need the driveline parts..

dbb1025 · 09-11-2014, 10:14 PM

I am out. Freight cost too much. Thanks for the patience.

**ScottH** · 09-12-2014, 12:21 AM

I could do $400 (budget prevents me from offering full price), need any parts that I could add?

**MidLifer** · 09-12-2014, 10:53 AM

Scott, $400 is good for me but I don't know how forum rules apply here. Beetle had put in a lower offer first, does he get to match your offer since he expressed interest earlier?

I work in Lawrenceville right off 95 so I could meet you kind of halfway between our home towns. I live a bit further south than Paul (88ironduke).

In terms of trades at this time, what I need is a Cable-x box or equivalent (Dakota Digital also makes one) and an Advance Adapters bellhousing for the NV4500 to enable me to use my mechanical clutch linkage with my 350. Probably a long shot if you have either of those.

beetle1960 · 09-12-2014, 11:41 AM

I don't know how the rules work either and I don't want to step on Scott since he made the first offer accepted, so I will get into line behind Scott should his deal fall apart. With that said, I will go 400.00 if you will strap to a pallet and load onto a truck that I schedule for pickup..

**ScottH** · 09-12-2014, 11:37 PM

Sorry guys, long day. I was interested in the trans for a possible future project, but if Beetle1960 needs it I will pass on it, can always find another if I do need one later.

Scott

beetle1960 · 09-13-2014, 12:47 AM

Midlifer, if you will accept $400.00 I'm in. Scott, thank you! my build is at a standstill for a Trans.

**MidLifer** · 09-13-2014, 09:17 AM

Beetle it's yours. Let's take the details offline. I will PM you with my phone number.

**ScottH** · 09-13-2014, 09:49 AM

Can u measure the drive shaft if Beetle doesn't need it? I do need one for a swb I'm working on.

Scott

**MidLifer** · 09-13-2014, 09:52 AM

The shaft is 41 3/4" as measured between the centers of the u-joint mount holes. It's marked "82-02 Camaro". I'll take $20 for it.

Here is a pic: https://drive.google.com/file/d/0B6u...it?usp=sharing

**ScottH** · 09-13-2014, 09:57 AM

thanks, unfortunately too short

beetle1960 · 09-13-2014, 11:00 AM

$ sent for Trans..

**MidLifer** · 09-13-2014, 01:36 PM

Got it.

09-11-2014, 10:14 PM	#27
dbb1025 Registered User Join Date: Jul 2013 Location: branford, connecticut Posts: 201	Re: 700r4 I am out. Freight cost too much. Thanks for the patience.

09-12-2014, 12:21 AM	#28
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 700r4 I could do $400 (budget prevents me from offering full price), need any parts that I could add? __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

09-12-2014, 10:53 AM	#29
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,267	Re: 700r4 Scott, $400 is good for me but I don't know how forum rules apply here. Beetle had put in a lower offer first, does he get to match your offer since he expressed interest earlier? I work in Lawrenceville right off 95 so I could meet you kind of halfway between our home towns. I live a bit further south than Paul (88ironduke). In terms of trades at this time, what I need is a Cable-x box or equivalent (Dakota Digital also makes one) and an Advance Adapters bellhousing for the NV4500 to enable me to use my mechanical clutch linkage with my 350. Probably a long shot if you have either of those.

09-12-2014, 11:41 AM	#30
beetle1960 Registered User Join Date: Aug 2013 Location: Hiram Ohio Posts: 619	Re: 700r4 I don't know how the rules work either and I don't want to step on Scott since he made the first offer accepted, so I will get into line behind Scott should his deal fall apart. With that said, I will go 400.00 if you will strap to a pallet and load onto a truck that I schedule for pickup.. __________________ 1953 Chevy 3100 1964 Chevy Impala 1966 Chevy El Camino 1970 Chevy C10 Fleet Long 1972 Chevy C10 Step long 1985 Chevy K10 Fleet Short

09-12-2014, 11:37 PM	#31
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 700r4 Sorry guys, long day. I was interested in the trans for a possible future project, but if Beetle1960 needs it I will pass on it, can always find another if I do need one later. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

09-13-2014, 12:47 AM	#32
beetle1960 Registered User Join Date: Aug 2013 Location: Hiram Ohio Posts: 619	Re: 700r4 Midlifer, if you will accept $400.00 I'm in. Scott, thank you! my build is at a standstill for a Trans. __________________ 1953 Chevy 3100 1964 Chevy Impala 1966 Chevy El Camino 1970 Chevy C10 Fleet Long 1972 Chevy C10 Step long 1985 Chevy K10 Fleet Short

09-13-2014, 09:17 AM	#33
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,267	Re: 700r4 Beetle it's yours. Let's take the details offline. I will PM you with my phone number.

09-13-2014, 09:49 AM	#34
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 700r4 Can u measure the drive shaft if Beetle doesn't need it? I do need one for a swb I'm working on. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

09-13-2014, 09:52 AM	#35
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,267	Re: 700r4 The shaft is 41 3/4" as measured between the centers of the u-joint mount holes. It's marked "82-02 Camaro". I'll take $20 for it. Here is a pic: https://drive.google.com/file/d/0B6u...it?usp=sharing

09-13-2014, 09:57 AM	#36
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: 700r4 thanks, unfortunately too short __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

09-13-2014, 11:00 AM	#37
beetle1960 Registered User Join Date: Aug 2013 Location: Hiram Ohio Posts: 619	Re: 700r4 $ sent for Trans.. __________________ 1953 Chevy 3100 1964 Chevy Impala 1966 Chevy El Camino 1970 Chevy C10 Fleet Long 1972 Chevy C10 Step long 1985 Chevy K10 Fleet Short

09-13-2014, 01:36 PM	#38
MidLifer Senior Member Join Date: Apr 2011 Location: South NJ Posts: 1,267	Re: 700r4 Got it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.