MO A few more parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**70shortfleet** · 10-06-2014, 08:54 PM

1) MMI tool for vent window restoration paid $90 sell for $50 shipped
2) powder coated vaccum canister, hold vaccum $25 shipped
3) sb heat shield and stove pipe, heat shield has small rust holes in it $35 shipped
4) left and right door handles in great shape $40 shipped
5) both sides door window channel like new $20 shipped

**70STOVEBOLT** · 10-06-2014, 09:09 PM

Les, is that the window channel run? If so I will take it for $20 shipped.

Thanks,
Mark

**70shortfleet** · 10-06-2014, 09:12 PM

Quote:

Originally Posted by 70STOVEBOLT

Les, is that the window channel run? If so I will take it for $20 shipped.

Thanks,
Mark

yes it is

**1rippen6** · 10-06-2014, 09:15 PM

What part does the MMI tool do?

**chewychevy67** · 10-06-2014, 09:15 PM

Interested in the vacuum can and rivet tool. Is the powder semi gloss or high gloss? Ship to Canada USPS ? Rod.

**70shortfleet** · 10-06-2014, 09:24 PM

Quote:

Originally Posted by 1rippen6

What part does the MMI tool do?

It is for putting the rivets in, I did my vent windows with it and don't need it

redbaron · 10-06-2014, 09:27 PM

I'll take the riveting tool. Thanks

**70shortfleet** · 10-06-2014, 09:29 PM

Quote:

Originally Posted by chewychevy67

Interested in the vacuum can and rivet tool. Is the powder semi gloss or high gloss? Ship to Canada USPS ? Rod.

It's been a long time sense I did the vacuum canister but I think it is gloss, pretty shiney, might have to charge a little bit more to ship to Canada

**70shortfleet** · 10-06-2014, 09:31 PM

Quote:

Originally Posted by redbaron

I'll take the riveting tool. Thanks

I will pm you payment info, thanks

**chewychevy67** · 10-06-2014, 09:31 PM

Charging extra is no problem but it looks like the rivet tool is spoken for and I was hoping for semi so I will pass.

**70shortfleet** · 10-07-2014, 07:49 AM

rivet tool and door window channel is sold pending payment

**70STOVEBOLT** · 10-07-2014, 04:47 PM

Paypal sent for window channel.

Thanks,
Mark

tonkatrux2 · 10-07-2014, 06:14 PM

Take tool if backs out

**70shortfleet** · 10-07-2014, 09:13 PM

Rivet tool sold to (redbaron) thanks

**70STOVEBOLT** · 10-10-2014, 11:40 AM

Les, received the window channel run today. Looks new. Thanks for the deal!

Mark

10-06-2014, 08:54 PM	#1
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,255	A few more parts 1) MMI tool for vent window restoration paid $90 sell for $50 shipped 2) powder coated vaccum canister, hold vaccum $25 shipped 3) sb heat shield and stove pipe, heat shield has small rust holes in it $35 shipped 4) left and right door handles in great shape $40 shipped 5) both sides door window channel like new $20 shipped Attached Images

10-06-2014, 09:09 PM	#2
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,538	Re: A few more parts Les, is that the window channel run? If so I will take it for $20 shipped. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

10-06-2014, 09:15 PM	#4
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,834	Re: A few more parts What part does the MMI tool do?

10-06-2014, 09:15 PM	#5
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,592	Re: A few more parts Interested in the vacuum can and rivet tool. Is the powder semi gloss or high gloss? Ship to Canada USPS ? Rod.

10-06-2014, 09:27 PM	#7
redbaron Registered User Join Date: Mar 2008 Location: Kimberly, Id Posts: 390	Re: A few more parts I'll take the riveting tool. Thanks

10-06-2014, 09:31 PM	#10
chewychevy67 Senior Member Join Date: Jan 2010 Location: Here Posts: 5,592	Re: A few more parts Charging extra is no problem but it looks like the rivet tool is spoken for and I was hoping for semi so I will pass.

10-07-2014, 07:49 AM	#11
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,255	Re: A few more parts rivet tool and door window channel is sold pending payment

10-07-2014, 04:47 PM	#12
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,538	Re: A few more parts Paypal sent for window channel. Thanks, Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

10-07-2014, 06:14 PM	#13
tonkatrux2 Registered User Join Date: Mar 2014 Location: springfield mo Posts: 355	Re: A few more parts Take tool if backs out

10-07-2014, 09:13 PM	#14
70shortfleet Senior Member Join Date: Apr 2010 Location: St.Peters, MO Posts: 2,255	Re: A few more parts Rivet tool sold to (redbaron) thanks

10-10-2014, 11:40 AM	#15
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,538	Re: A few more parts Les, received the window channel run today. Looks new. Thanks for the deal! Mark __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.