Speaker/Sub Box - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BowTieMan · 12-27-2005, 02:46 AM

longlow72 thanks for posting those pictures. those help alot man. What kind of board should I use. MDF? What thickness?

Striker169 · 12-27-2005, 02:55 AM

I was planning on using MDF I dono about thickness though... any imput guys?

muddpile · 12-27-2005, 03:24 AM

I usually used 3/4" MDF, although 5/8" would work as well. 1/2" could, provided there aren't a lot of big flat surfaces and it were braced properly.

70short · 12-27-2005, 04:18 AM

Here is mine and it sounds awesome!!

Gary

Striker169 · 12-27-2005, 02:23 PM

Hey do you have any more shots of yours 70short and could you post the demisions or something on that picture or a diagram or anything? that is mroe what I am going for but with only 1 sub and 2 speakers.

longnlow72 · 12-27-2005, 03:15 PM

its 1/2" mdf, those are generally shallow subs that are supposed to sound good in smaller boxes, its alot of trial and error. good luck and i can try to answer any questions you might have. oh and the only thing i had to remove was the wire thing goin across under the seat that pulls in and out the pin that holds the seat track in the position its in, you can stll adjust the seat but it takes 2 people

mike nutt · 12-27-2005, 05:09 PM

cool

BowTieMan · 12-27-2005, 06:25 PM

My wire is allready gone since I got two boxs with 6x9's in them. Does the seat hit the sub at all? My subs are 5 1/4" deep so those should fit shouldn't they?

Edit: I just looked at your plans again and and noticed its only 5 in. tall from that little notch up. I wonder if I could make it any taller and still not hit the seat. I'll have to go measure it soon.

Lippyp · 01-19-2006, 05:51 AM

Hey longnlow72, sorry to ressurect a thread from the dead but can you tell me what size those subs are? Are they JL 8W3's? I have to pull my cab apart to do some repairs and fit some new carpet etc so I want to add a sub, amp and some component speakers in the doors to replace the current JBL 6x9's in the back end of the door as they don't sound great firing straight into the seats.

724x4a/cchevy · 01-20-2006, 12:09 PM

HEY that second Cardomain.com picture is of my truck!!!

I really should update that site now that the truck is complete lol

4DSEVEN · 09-25-2014, 05:54 PM

It's an old thread but looking for ideas on a behind the seat sub enclosure.

BR3W CITY · 09-26-2014, 01:02 AM

Quote:

Originally Posted by 4DSEVEN

It's an old thread but looking for ideas on a behind the seat sub enclosure.

An 8 year old thread....that might be a necro-posting record.

4DSEVEN · 09-29-2014, 07:20 AM

Quote:

Originally Posted by BR3W CITY

An 8 year old thread....that might be a necro-posting record.

And your point being...?

srengr · 10-11-2014, 03:21 PM

Quote:

Originally Posted by Striker169

So I dont have an in cab gas tank, and was thinking of building a box for two 6x9's and a 8in sub that looks and is similar to the same measurements as the gas tank. Has anyone done this before or something similar? and if you have a nice sound system in your truck could you post pictures.

Here is mine, in a TF...

See-- http://67-72chevytrucks.com/vboard/s...8&postcount=21

_Ogre · 10-11-2014, 04:59 PM

and another task force sub/amp enclosure
while tf and ad are different the principal and structure is the same for all behind seat enclosures
lots of info in my build thread (in sig) and i believe i have a build thread for the enclosure in this truck audio forum

12-27-2005, 02:46 AM	#26
BowTieMan Registered User Join Date: Dec 2003 Location: Glendale Arizona Posts: 747	Re: Speaker/Sub Box longlow72 thanks for posting those pictures. those help alot man. What kind of board should I use. MDF? What thickness? __________________ "A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo Last edited by BowTieMan; 12-27-2005 at 02:57 AM.

12-27-2005, 02:55 AM	#27
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Re: Speaker/Sub Box I was planning on using MDF I dono about thickness though... any imput guys?

12-27-2005, 03:24 AM	#28
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Re: Speaker/Sub Box I usually used 3/4" MDF, although 5/8" would work as well. 1/2" could, provided there aren't a lot of big flat surfaces and it were braced properly. __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

12-27-2005, 04:18 AM	#29
70short Registered User Join Date: Sep 2003 Location: Boise ID Posts: 609	Re: Speaker/Sub Box Here is mine and it sounds awesome!! Gary Attached Images __________________ "72" Red CORVETTE 4-speed 350 "70" Chevy Short Bed early stages of resto. Edel 600 cfm carb Weiand Stealth Intake HEI shorty Headers 4/2 Drop 295 50R 15 TOYO on 10 inch wide corvette rally rims at all 4 corners. "CHEVY RULES"

12-27-2005, 02:23 PM	#30
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Re: Speaker/Sub Box Hey do you have any more shots of yours 70short and could you post the demisions or something on that picture or a diagram or anything? that is mroe what I am going for but with only 1 sub and 2 speakers.

12-27-2005, 03:15 PM	#31
longnlow72 Registered User Join Date: Aug 2004 Location: SW Washington Posts: 947	Re: Speaker/Sub Box its 1/2" mdf, those are generally shallow subs that are supposed to sound good in smaller boxes, its alot of trial and error. good luck and i can try to answer any questions you might have. oh and the only thing i had to remove was the wire thing goin across under the seat that pulls in and out the pin that holds the seat track in the position its in, you can stll adjust the seat but it takes 2 people __________________ 72 Chevy lwb, cowl hood, shaved antenna, shaved bedrails, blazer tank, sidemarker fill, 1pc windows, flowmaster 40's, alpine deck, infinity 6x9's, infinity 4"ers, 2 jl audio 10w0's, grant wheel, keyless entry and alarm, more waiting to be done...

12-27-2005, 05:09 PM	#32
mike nutt 69fatmotor Join Date: Oct 2005 Location: bama Posts: 660	Re: Speaker/Sub Box cool

12-27-2005, 06:25 PM	#33
BowTieMan Registered User Join Date: Dec 2003 Location: Glendale Arizona Posts: 747	Re: Speaker/Sub Box My wire is allready gone since I got two boxs with 6x9's in them. Does the seat hit the sub at all? My subs are 5 1/4" deep so those should fit shouldn't they? Edit: I just looked at your plans again and and noticed its only 5 in. tall from that little notch up. I wonder if I could make it any taller and still not hit the seat. I'll have to go measure it soon. __________________ "A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo Last edited by BowTieMan; 12-27-2005 at 07:01 PM.

01-19-2006, 05:51 AM	#34
Lippyp English Chevy Owner Join Date: May 2002 Location: Shropshire, UK/ Lot, France Posts: 1,848	Re: Speaker/Sub Box Hey longnlow72, sorry to ressurect a thread from the dead but can you tell me what size those subs are? Are they JL 8W3's? I have to pull my cab apart to do some repairs and fit some new carpet etc so I want to add a sub, amp and some component speakers in the doors to replace the current JBL 6x9's in the back end of the door as they don't sound great firing straight into the seats. __________________ Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission Last edited by Lippyp; 01-19-2006 at 09:36 AM.

01-20-2006, 12:09 PM	#35
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Re: Speaker/Sub Box HEY that second Cardomain.com picture is of my truck!!! I really should update that site now that the truck is complete lol

09-25-2014, 05:54 PM	#36
4DSEVEN Registered User Join Date: Jan 2009 Location: Ontario Canada Posts: 239	Re: Speaker/Sub Box It's an old thread but looking for ideas on a behind the seat sub enclosure.

10-11-2014, 04:59 PM	#40
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: Speaker/Sub Box and another task force sub/amp enclosure while tf and ad are different the principal and structure is the same for all behind seat enclosures lots of info in my build thread (in sig) and i believe i have a build thread for the enclosure in this truck audio forum __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.