I need a 200 ft-lbs torque wrench - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gmebey · 10-26-2014, 11:40 PM

My project (1969 c20 rebuild) is slowly building my tool pile. Now I'm in need of a 200 ft-lbs torque wrench, but my budget is limited.

Anyway enough rambling. Does anyone know about the Neiko brand 50-300 ft-lbs, model RIDGE03704?

Is it worth it for the weekend mechanic?

_Ogre · 10-27-2014, 11:26 AM

that is a 3/4'' head and will be hard to get into some spots
1/2'' head will be readily available any where
this is something i'd buy new, torque wrenches can be abused and get out of spec
in a pro shop they need to be calibrated every few years
i've never had my 25 yr old craftman clicker calibrated

10-26-2014, 11:40 PM	#1
gmebey Registered User Join Date: May 2011 Location: Fort Collins, Colorado Posts: 95	I need a 200 ft-lbs torque wrench My project (1969 c20 rebuild) is slowly building my tool pile. Now I'm in need of a 200 ft-lbs torque wrench, but my budget is limited. Anyway enough rambling. Does anyone know about the Neiko brand 50-300 ft-lbs, model RIDGE03704? Is it worth it for the weekend mechanic?

10-27-2014, 11:26 AM	#2
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: I need a 200 ft-lbs torque wrench that is a 3/4'' head and will be hard to get into some spots 1/2'' head will be readily available any where this is something i'd buy new, torque wrenches can be abused and get out of spec in a pro shop they need to be calibrated every few years i've never had my 25 yr old craftman clicker calibrated __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.