I need help with c10 emblems. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigblue68 · 01-26-2004, 12:02 AM

I was trying to take the c10 emblems off the fender of my 68 fleet side and I broke the 1 off the ten. Does anyone know where you can find the ones that just pop in and are not bolted on( or do they even make that kind)? And is there an easy way to get to those nerve racking, good for nothing, little bitty, pain in the butt nuts off the back of the emblems. As you can see I had a hard time just trying to remove two nuts.

jhow66 · 01-26-2004, 12:15 AM

Most parts stores carry a gismo that pushs in the holes for the emblem pins and locks in. The emblems pins then push into these and lockks . Can be removed easy when you want to take the emblem off by just pulling on it. Have them on my Cheyenne 10 ones.Can't remember the name of them-maybe nut serts,capture locks. Just take a emblem with you to show what you need.

Longhorn Man · 01-26-2004, 01:01 AM

Or you could use adhesive to reinstall it. 3M makes some good stuff.

**too much stuff** · 01-26-2004, 01:16 AM

The item you are looking for is called "barrel nuts" They go in the existing holes in the fender then push the emblem on. Should be available at most parts stores or body shops.

01-26-2004, 12:02 AM	#1
bigblue68 Registered User Join Date: Jan 2004 Location: camden,arkansas Posts: 29	I need help with c10 emblems. I was trying to take the c10 emblems off the fender of my 68 fleet side and I broke the 1 off the ten. Does anyone know where you can find the ones that just pop in and are not bolted on( or do they even make that kind)? And is there an easy way to get to those nerve racking, good for nothing, little bitty, pain in the butt nuts off the back of the emblems. As you can see I had a hard time just trying to remove two nuts. __________________ praise God in everything you do!

01-26-2004, 12:15 AM	#2
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	Most parts stores carry a gismo that pushs in the holes for the emblem pins and locks in. The emblems pins then push into these and lockks . Can be removed easy when you want to take the emblem off by just pulling on it. Have them on my Cheyenne 10 ones.Can't remember the name of them-maybe nut serts,capture locks. Just take a emblem with you to show what you need. __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer

01-26-2004, 01:16 AM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	The item you are looking for is called "barrel nuts" They go in the existing holes in the fender then push the emblem on. Should be available at most parts stores or body shops. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-26-2004, 01:01 AM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Or you could use adhesive to reinstall it. 3M makes some good stuff.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.