Refresh... - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

zenish · 01-25-2004, 08:15 PM

goodpliers,i like your flatbed.

BtnkBndt · 01-25-2004, 09:03 PM

Quote:

Originally posted by djracer
BtnkBndt What's that in the lifter valley never seen one?

I dropped a can of V8 in there. I thought about picking it up, went ahead and painted it.

Thats the ventilator canister thing. I just found out on another thread it had a given name. The 67 283 vents through the ventilator to the rear of the block. See the fitting/hose directly above it next to the oil pressure sender.

**1971Stepside** · 01-25-2004, 09:11 PM

Just doing a test fit of all the panels.

**JIMs70GMC** · 01-25-2004, 09:57 PM

posted on the general forum, but I did paint my grill and installed it yesterday. Going to replace the hood hinges next and put the cowl back on. Going to paint the new hood and need to install my GMC letters.

*Randy70C-10* · 01-25-2004, 09:59 PM

Nice stepside!!

tomsC10R · 01-26-2004, 12:51 AM

Here's a picture of my truck on the 10th of Dec, about 2 weeks after we picked it up. Of course we had to get a blizard

tomsC10R · 01-26-2004, 12:55 AM

And here's the truck in its non heated poorly lit(my camera's got a good flash) storage shed last weekend. At least I don't have to work in the snow.

JadeEmperor · 01-26-2004, 01:41 AM

FCG - Like your website, good links too. A buddy wanted to run those headlights you got, do you have any info on them? Thanks

stelth2002 · 01-26-2004, 03:53 AM

FCG, im also wondering what that cover on your bed would weigh? Like the alum one.

JunkYardDog · 01-26-2004, 04:31 AM

This is my truck hours after I brought it home back in June '03.
Its very basic, 6 cyl. three on the tree,never had a radio installed.
Formerly an oldman farm truck.
1969 C/10

JunkYardDog · 01-26-2004, 05:19 AM

second try

JunkYardDog · 01-26-2004, 05:23 AM

try again

JunkYardDog · 01-26-2004, 05:33 AM

?

jay-dawg · 01-26-2004, 06:32 AM

Here's mine as of Christmas. Took me 6 hours to fit this door. I didnt take pics of the axle that I painted today.

Jay

Blue Beard · 01-26-2004, 09:29 AM

68lwb,

Standing offer of mine..........

Anyone that wants pictures posted or need help.........PM me and I'll do my best to give directions or post the pics for you........

Blue Beard · 01-26-2004, 09:35 AM

JIMs70GMC, looks like you painted the camera lense.........or is it snowing.......?

BtnkBndt · 01-26-2004, 10:11 AM

JunkYardDog,
Nice original truck you got! Lets see more.

Welcome to the board.

01-25-2004, 09:11 PM	#28
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Here is mine.. Just doing a test fit of all the panels. Attached Images __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

01-25-2004, 09:57 PM	#29
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Here's mine, posted on the general forum, but I did paint my grill and installed it yesterday. Going to replace the hood hinges next and put the cowl back on. Going to paint the new hood and need to install my GMC letters. Attached Images __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm Last edited by JIMs70GMC; 01-25-2004 at 10:00 PM.

01-26-2004, 12:51 AM	#31
tomsC10R Registered User Join Date: Nov 2003 Location: Wisconsin Posts: 281	Here's a picture of my truck on the 10th of Dec, about 2 weeks after we picked it up. Of course we had to get a blizard Attached Images __________________ Tom 1968 C10 LWB. 402 BB, Holley MPI, 700R4. 4wheel Hydroboost Disk Brakes.

01-26-2004, 12:55 AM	#32
tomsC10R Registered User Join Date: Nov 2003 Location: Wisconsin Posts: 281	And here's the truck in its non heated poorly lit(my camera's got a good flash) storage shed last weekend. At least I don't have to work in the snow. Attached Images __________________ Tom 1968 C10 LWB. 402 BB, Holley MPI, 700R4. 4wheel Hydroboost Disk Brakes. Last edited by tomsC10R; 01-26-2004 at 01:01 AM.

01-26-2004, 01:41 AM	#33
JadeEmperor Registered User Join Date: Aug 2002 Location: Phoenix, AZ 85018 Posts: 102	FCG - Headlights? FCG - Like your website, good links too. A buddy wanted to run those headlights you got, do you have any info on them? Thanks __________________ Jimmie Modern Vintage Autoworks - '70 Chevy C10 - '74 Chevy C30 3+3 Dually - '04 Chevy Colorado Built, NOT, Bought. If you build it...they will ENVY! Drive Slow, Scrape Hard, or Take Your Truck and GO HOME!

01-25-2004, 08:15 PM	#26
zenish Registered User Join Date: Aug 2003 Location: stallings,nc Posts: 401	goodpliers,i like your flatbed.

01-25-2004, 09:59 PM	#30
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Nice stepside!!

01-26-2004, 03:53 AM	#34
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	FCG, im also wondering what that cover on your bed would weigh? Like the alum one. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

01-26-2004, 04:31 AM	#35
JunkYardDog Registered User Join Date: Jan 2004 Location: Lancaster Pa. Posts: 4	My First Post This is my truck hours after I brought it home back in June '03. Its very basic, 6 cyl. three on the tree,never had a radio installed. Formerly an oldman farm truck. 1969 C/10

01-26-2004, 05:19 AM	#36
JunkYardDog Registered User Join Date: Jan 2004 Location: Lancaster Pa. Posts: 4	My second post second try Attached Images

01-26-2004, 05:23 AM	#37
JunkYardDog Registered User Join Date: Jan 2004 Location: Lancaster Pa. Posts: 4	My third post try again Attached Images

01-26-2004, 05:33 AM	#38
JunkYardDog Registered User Join Date: Jan 2004 Location: Lancaster Pa. Posts: 4	last try ? Attached Images

01-26-2004, 06:32 AM	#39
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	Here's mine as of Christmas. Took me 6 hours to fit this door. I didnt take pics of the axle that I painted today. Jay Attached Images __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

01-26-2004, 09:29 AM	#40
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	68lwb, Standing offer of mine.......... Anyone that wants pictures posted or need help.........PM me and I'll do my best to give directions or post the pics for you........ __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-26-2004, 09:35 AM	#41
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	JIMs70GMC, looks like you painted the camera lense.........or is it snowing.......? __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo



Register or Log In To remove these advertisements.

01-26-2004, 10:11 AM	#42
BtnkBndt Pennyless Fool Join Date: Oct 2003 Location: Forney,Tx Posts: 439	JunkYardDog, Nice original truck you got! Lets see more. Welcome to the board. __________________ "Who owns this car with the peace sign, the mag wheels, and four on the floor?" 67 Short Step 283/TH400/4.11

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.