|
01-28-2004, 06:13 PM
|
#1 |
|
Senior Member
Join Date: Jul 2003
Location: Indianapolis, IN
Posts: 1,277
|
Stuck Shackle Bolt
I am trying to finish a flip kit install on my 84 1/2T. I thought while I was at it I would install poly bushings in the shackles and springs. I have everything apart except for the removal of one rear shackle bolt. It seems to be frozen into the sleeve of the shackle bushing. The other shackle bolt was frozen as well, it took nearly forever with a sawzall and grinder to cut the bolt and get the shackle out. The swazall didn't have much effect on the factory grade 8 bolts.
I have tried pushing the remaining shackle bolt with a 4T bottle jack braced against the other side of the frame and using a section of pipe to push against the bolt with the jack. That doesn't work either. Any other ideas? This project seemed like a good idea when I started. Now? I'm driving a Mercury Grand Marquis while my truck sits in the garage. That's tough on a guy. |
|
|
|
01-28-2004, 08:51 PM
|
#2 |
|
Registered User
Join Date: Sep 2002
Location: long island, new york
Posts: 1,333
|
i torched mine out, i did the same as you and not one bolt came out it sucked!
__________________
1986 c-10 swb 5/7 drop 20'' coys 1958 belair 2door |
|
|
|
|
01-28-2004, 11:03 PM
|
#3 |
|
Senior Member
Join Date: Jul 2003
Location: Indianapolis, IN
Posts: 1,277
|
Hey at least now I don't feel so stupid. I had an 83 where the bolt came out with no problems. Must be something to do with living in the rust belt.
|
|
|
|
|
01-29-2004, 12:20 AM
|
#4 |
|
Happy to be here
 
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
|
You need to
 or maybe  
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
