drop spindles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

slotard · 01-22-2015, 09:55 PM

If that's the only thing you're trying to determine, it's just the thickness. Measure at any point along the outside. You should even be able to eyeball it pretty easily.

MalibuSSwagon · 01-22-2015, 11:12 PM

I bought drop spindles for 1.25 inch rotors to upgrade the brakes on my C10. If you do go that route you'll need the matching calipers.

01-22-2015, 09:55 PM	#1
slotard Registered User Join Date: Nov 2014 Location: Alameda, CA Posts: 877	Re: drop spindles If that's the only thing you're trying to determine, it's just the thickness. Measure at any point along the outside. You should even be able to eyeball it pretty easily. __________________ 1973 C20, 350/350

01-22-2015, 11:12 PM	#2
MalibuSSwagon Registered User Join Date: Sep 2009 Location: Weare,NH Posts: 1,592	Re: drop spindles I bought drop spindles for 1.25 inch rotors to upgrade the brakes on my C10. If you do go that route you'll need the matching calipers. __________________ Eric 1992 Oldsmobile Custom Cruiser 1986 Chevrolet C10\|5.3L\|TKO600\|Shortbed\|Custom Deluxe 1983 Malibu Wagon\|TPI 305\|T5 5 speed\|3.73 non-posi

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.