Steering wheel removal problems - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FlameOut · 01-30-2015, 03:52 PM

I know this has been asked a million times, and I found some threads concerning the removal of the steering wheel, but nothing is pulling this thing off. I know some said theirs came off easily just by pulling with their hands, other used a puller.

I have the nut backed off, and I've been pulling, beating with rubber mallet, used a wheel puller, but this thing won't budge. I even cut the steering wheel to see if I could see something I'm missing. It's just a matter of removing the large center nut, and sliding the wheel off, right? I thought about applying some heat, but I know there are some plastic parts in there. I almost to the point of looking for another column because I'm also having shifting problems

Name: 20150130_143641_resized.jpg
Views: 1209
Size: 37.9 KB

Name: 20150130_143641_resized.jpg
Views: 1209
Size: 37.9 KB

Name: 20150130_143627_resized.jpg
Views: 870
Size: 34.0 KB

EARNHARDT#3 · 01-30-2015, 04:10 PM

Mine was a female dog too. Ended up using my impact on the puller and it popped right off.

**Stocker** · 01-30-2015, 04:19 PM

Try soaking it with a good penetrating fluid overnight, it might just be rusted in place.

71meangreenc10 · 01-30-2015, 04:38 PM

That is one angry steering wheel....

Smitty

CrewCab59 · 01-30-2015, 04:48 PM

It would also help by using a washers so the bolt isn't pulling past the fork, using a short bolt and pulling straight up. You need to a dead blow hammer or a pall pein hammer and smack the center bolt ( don't have to hit it very hard ) .

It will come loose.

Scott

Ozark Tim · 01-30-2015, 05:10 PM

Dang, that is the color steering wheel I have been looking for high and low. What, when it does come off are you replacing it with?
Other than a few crazy looking bolts there I don't see any reason it should not come off.

see ten · 01-30-2015, 06:54 PM

Watched my dad remove many a steering wheel with a couple 4lb hammers... back off the nut (kinda like you've got it). Hold one hammer against the nut... and apply a swift blow with the other... usually fell off in his lap.

same principle applies to steering arms...

I've never seen one that seems as stubborn as what you're working with. I agree with the previous statement about using washers to keep the heads of the bolts from pulling through.

FlameOut · 01-30-2015, 07:24 PM

I soaked it with some PB blaster and will give it another shot tomorrow. I did break off my 4 way flasher button though. Hopefully that's an easy fix.

I haven't found a new replacement wheel yet, but I do have a 67 Chevelle and a 68 Impala wheel. Will either of those fit?

01-30-2015, 03:52 PM	#1
FlameOut Registered User Join Date: May 2014 Location: Pittsburgh, PA Posts: 712	Steering wheel removal problems I know this has been asked a million times, and I found some threads concerning the removal of the steering wheel, but nothing is pulling this thing off. I know some said theirs came off easily just by pulling with their hands, other used a puller. I have the nut backed off, and I've been pulling, beating with rubber mallet, used a wheel puller, but this thing won't budge. I even cut the steering wheel to see if I could see something I'm missing. It's just a matter of removing the large center nut, and sliding the wheel off, right? I thought about applying some heat, but I know there are some plastic parts in there. I almost to the point of looking for another column because I'm also having shifting problems __________________ Bill 2004 Chevy Silverado Z71 Ext Cab 1500 1972 Chevy K-10 SOLD 1967 Chevelle SS

01-30-2015, 04:10 PM	#2
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: Steering wheel removal problems Mine was a female dog too. Ended up using my impact on the puller and it popped right off.

01-30-2015, 04:38 PM	#4
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,179	Re: Steering wheel removal problems That is one angry steering wheel.... Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 69 C30 Former Motor Home, Flat Bed time 70 G20 Red-E-Kamp Conversion "I'm your Boogy Van"

01-30-2015, 04:48 PM	#5
CrewCab59 Registered User Join Date: Jul 2010 Location: Knoxville,TN Posts: 1,185	Re: Steering wheel removal problems It would also help by using a washers so the bolt isn't pulling past the fork, using a short bolt and pulling straight up. You need to a dead blow hammer or a pall pein hammer and smack the center bolt ( don't have to hit it very hard ) . It will come loose. Scott __________________ 1972 Custom Deluxe 20 4x4 burb 1971 GMC SWB CST 4x4 1972 GMC k20 4x4 (X- brush truck ) 1971 Chevy CST Blazer 4x4 1971 Chevy C/10 1970 Cab Chassis C30 157" 1971 Cab Chassis Custom 30 Deluxe 157" 292/4spd ( Napco Replica ) 1988 Chevy V30 4x4 wrecker challenger 4812

01-30-2015, 05:10 PM	#6
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: Steering wheel removal problems Dang, that is the color steering wheel I have been looking for high and low. What, when it does come off are you replacing it with? Other than a few crazy looking bolts there I don't see any reason it should not come off.

01-30-2015, 04:19 PM	#3
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,722	Re: Steering wheel removal problems Try soaking it with a good penetrating fluid overnight, it might just be rusted in place. __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

01-30-2015, 06:54 PM	#7
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: Steering wheel removal problems Watched my dad remove many a steering wheel with a couple 4lb hammers... back off the nut (kinda like you've got it). Hold one hammer against the nut... and apply a swift blow with the other... usually fell off in his lap. same principle applies to steering arms... I've never seen one that seems as stubborn as what you're working with. I agree with the previous statement about using washers to keep the heads of the bolts from pulling through.

01-30-2015, 07:24 PM	#8
FlameOut Registered User Join Date: May 2014 Location: Pittsburgh, PA Posts: 712	Re: Steering wheel removal problems I soaked it with some PB blaster and will give it another shot tomorrow. I did break off my 4 way flasher button though. Hopefully that's an easy fix. I haven't found a new replacement wheel yet, but I do have a 67 Chevelle and a 68 Impala wheel. Will either of those fit? __________________ Bill 2004 Chevy Silverado Z71 Ext Cab 1500 1972 Chevy K-10 SOLD 1967 Chevelle SS

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.