|
01-31-2015, 09:51 PM
|
#1 |
|
Registered User
Join Date: May 2014
Location: Boston MA
Posts: 1
|
Parts Help
Hey guys, I know I don't post much but I lurk the site all the time. I was wondering if I could get some advice?
I have a 77 K10 rcsb and my Dana 44 front axle is giving me some issues. I don't know much about axles at all other than a few crappy YouTube of disassembling them. I believe my spindle bearing has gone bad (wheel and backing plate move). I have the special socket but I am not sure if i have found the correct parts. Links follow. http://www.summitracing.com/parts/TMK-B2110 http://www.summitracing.com/parts/GTA-30-8008 I figure I should also do the wheel bearing while im in there. Are there any other parts that you recommend replacing as well while I have it apart? I also think I will do both sides to be safe. I want a reliable daily driver. Thank you for any help! |
|
|
|
02-01-2015, 05:33 AM
|
#2 |
|
Registered User
Join Date: May 2007
Location: New Hampshire
Posts: 349
|
Re: Parts Help
You might already have this, but if not it may help:
 http://depositfiles.com/files/wjdegjjvv 6 mb, 50 pages, no PW |
|
|
|
 |
| Bookmarks |
| Tags |
| 4.8, axle, chevy, k10 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
