Anyone Modify a Custom grill to use turn signals?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BladeX · 01-29-2004, 12:55 AM

i bought this grill the other day.

But i circled in red. is like a upside down L shaped hook. And its in the middle of the grill not in the bottom corners like the stock grill.

Anyone every modify one of these things?

*1972C10* · 01-29-2004, 01:35 AM

I just got a sqaure tubing grille for my 85 and it has that same thing but below it is a flat bar with some notches in it for the turn signal look and see if yours has the same

Mine come off an 85 and already had the lights in it that may be the case on yours

Izzy · 01-29-2004, 10:37 AM

My Trex billet grille I had on my 83 had provisions for the stock parking lamps.

cochran63 · 01-29-2004, 11:27 PM

I put a stull in my 85 and it had some brackets for the lights? You can always use duct tape and bailin wire....

apstguy · 01-30-2004, 03:52 AM

I had the same hooks on my Trenz. You cut the ears off the stock lights and ise the hook and a self tapping screw on the bottom to secure it.

87 STEPPER · 01-31-2004, 05:08 PM

I installed these lights from a fiero.

If i remember correctly i just fastened them to the bottom mounting bracket of the grille.

My grille had the same L- tab in the correct location but i didn't like the look of the factory light's so off they came.

01-29-2004, 12:55 AM	#1
BladeX Registered User Join Date: Dec 2003 Location: Kentucky, Ft. Campbell Posts: 287	Anyone Modify a Custom grill to use turn signals?? i bought this grill the other day. But i circled in red. is like a upside down L shaped hook. And its in the middle of the grill not in the bottom corners like the stock grill. Anyone every modify one of these things?

01-29-2004, 11:27 PM	#4
cochran63 Registered User Join Date: Jan 2004 Location: Oklahoma Posts: 1,057	I put a stull in my 85 and it had some brackets for the lights? You can always use duct tape and bailin wire.... __________________ Youth soon passes away, but immaturity can last a life time.

01-30-2004, 03:52 AM	#5
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,088	I had the same hooks on my Trenz. You cut the ears off the stock lights and ise the hook and a self tapping screw on the bottom to secure it. __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

01-31-2004, 05:08 PM	#6
87 STEPPER STILL PLAYS WITH TRUX Join Date: Nov 2002 Location: Melbourne, Fla. Posts: 2,764	I installed these lights from a fiero. If i remember correctly i just fastened them to the bottom mounting bracket of the grille. My grille had the same L- tab in the correct location but i didn't like the look of the factory light's so off they came. __________________ ~~Bruce~~ MY 87 STEPPER MY 99 2D/WD TAHOE

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-29-2004, 01:35 AM	#2
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	I just got a sqaure tubing grille for my 85 and it has that same thing but below it is a flat bar with some notches in it for the turn signal look and see if yours has the same Mine come off an 85 and already had the lights in it that may be the case on yours

01-29-2004, 10:37 AM	#3
Izzy Trucker. Join Date: Nov 2002 Location: Fort Worth, TX Posts: 1,364	My Trex billet grille I had on my 83 had provisions for the stock parking lamps.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.