KS Parting a 72 chevy C20 now - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HOTRODSBYCHIP · 03-13-2015, 03:24 PM

How much for the promotional valve

rlm316 · 03-13-2015, 03:40 PM

Hey Randy, Thanks, I'll take the alt. brackets. Shipping to 08098.

bronze 72 super · 03-13-2015, 03:44 PM

Randy, looked at the one tail light bezel, looks fine. Also I need the headlight bezels, and rear window trim also. When you remove the tail light lens and backup lens, could you include all screws, plus the ones from all the bezels? Thanks, Mike.

teeitup · 03-13-2015, 05:08 PM

67JimmyMo, wish I could of helped

rlk, I should have that out there, I will look

Hotrodsbychip, this one sells with the booster setup. I have others out there, I will look

Lane, $33 shipped for the alt brackets

Mike, sorry I don't ship the rear window chrome. Should have all the other parts

Thanks Randy

**leddzepp** · 03-13-2015, 05:10 PM

Randy- I noticed the sway bar is gone. Are the frame brackets still there by chance? Thanks.

teeitup · 03-13-2015, 05:26 PM

Scott, they are but I need them for a setup I have out there, sorry

Vintage Windmills · 03-13-2015, 06:02 PM

Thanks Randy, I will take the doors if they are available yet. How much for both fenders and the tailgate and aux tank wiring switch, and valve setup? I will think on the bed and cab.

danny69 · 03-13-2015, 06:07 PM

Randy
What are kinda shape are the seat belts in are they black. Danny

teeitup · 03-13-2015, 06:16 PM

Jud, I have a guy wanting the doors, he was asking about them last night. Front fenders are $150 for pair, tailgate is $150. let me see if i can get the aux gas stuff off

Danny, I have one guy ahead of you on belts

Thanks Randy

bronze 72 super · 03-13-2015, 07:32 PM

Randy, would like to get that trim...but if you won't ship, that's fine. Just give me a total when you get the chance to pull the parts. Please include the screws also. Thanks Mike.

w00dst0ck · 03-13-2015, 07:39 PM

Factory filler neck? Need the metal part that goes through the gasket. Will take the cap too if you have it.

teeitup · 03-13-2015, 07:46 PM

Mike, the rear taillight bezels are beat up pretty bad. I won't start parting this truck till next week

Woodstock, I'll see if its any good when I get it pulled

Thanks Randy

teeitup · 03-13-2015, 07:53 PM

rlk, here is a turbo 400 setup, I have to get the tranny bracket off another truck, the 2nd pic is what I have to take off yet. $30 plus shipping for the full setup up

bronze 72 super · 03-13-2015, 08:03 PM

Randy, no problem on the tail light bezels, I'll take them anyways. Reason being they're going on a truck I'm putting up for sale, just need something to "fill the holes". Make sense? Thanks Mike.

w00dst0ck · 03-13-2015, 08:18 PM

Quote:

Originally Posted by teeitup

Mike, the rear taillight bezels are beat up pretty bad. I won't start parting this truck till next week

Woodstock, I'll see if its any good when I get it pulled

Thanks Randy

Thanks!

gs1969 · 03-13-2015, 08:46 PM

Randy,

Still on for Sunday? Early afternoon?

Gary

Ugly 61 · 03-13-2015, 09:18 PM

Randy How much for the wheels and tires??
Ugly 61

teeitup · 03-13-2015, 09:28 PM

Mike, when I get it all parted I will get some pics and price

Woodstock, I will get with you

Gary, I will be home by 2:00 for sure Sun

Gary, they are not a matched set, I think there is 3 that is alike

Thanks Randy

72 blue · 03-13-2015, 09:35 PM

Randy, how about the fuel line from pump to carb, looking for a factory metal one... Also how about a good right side window regulator.....looking for some real clean pit free door out side handels

.Randy, I wanted you to know I found that little bracket for the power steering hoses from my last order !

Thank you so much Randy, my bumper showed up tonight and I am very happy !

You have been a great asset to my project.

Thanks Rick jackson

70 stepside · 03-13-2015, 09:59 PM

Randy do you have a 1970-72 c10 sbc 3 groove crank pulley swp with a 2 groove water pump pulley.

Ugly 61 · 03-13-2015, 10:01 PM

Randy The photo shows the left rear is different from the rest if they are 16" not 16.5 I'd still be interested.
Ugly 61

teeitup · 03-13-2015, 10:16 PM

Rick, glad you found the bracket and are happy with bumper. I'll look on gas line and regulator

70 stepside, I should have that setup out there I will look, it will be Sun before I have time

Gary, I will check size

Thanks Randy

Jake1971 · 03-13-2015, 10:28 PM

Hey Randy, since it has been 40+ years since I have seen the inside of a '72 bed with an auxiliary tank, does this truck have a metal cover over the filler neck similar to a blazer?
If so I will take the metal cover for my build pending pictures. Thanks again!

Jake1971 · 03-13-2015, 10:29 PM

Hey Randy, since it has been 40+ years since I have seen the inside of a '72 bed with an auxiliary tank, does this truck have a metal cover over the filler neck similar to a blazer?

If so I will take the metal cover for my build pending pictures. Thanks again!

teeitup · 03-14-2015, 09:28 AM

Paul, yes it does, I will see if its in good shape Sunday. Thanks man, Randy

03-13-2015, 03:24 PM	#26
HOTRODSBYCHIP Registered User Join Date: Sep 2013 Location: Birchwood TN Posts: 86	Re: Parting a 72 chevy C20 now How much for the promotional valve

03-13-2015, 03:40 PM	#27
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: Parting a 72 chevy C20 now Hey Randy, Thanks, I'll take the alt. brackets. Shipping to 08098.

03-13-2015, 03:44 PM	#28
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: Parting a 72 chevy C20 now Randy, looked at the one tail light bezel, looks fine. Also I need the headlight bezels, and rear window trim also. When you remove the tail light lens and backup lens, could you include all screws, plus the ones from all the bezels? Thanks, Mike.

03-13-2015, 05:08 PM	#29
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 now 67JimmyMo, wish I could of helped rlk, I should have that out there, I will look Hotrodsbychip, this one sells with the booster setup. I have others out there, I will look Lane, $33 shipped for the alt brackets Mike, sorry I don't ship the rear window chrome. Should have all the other parts Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-13-2015 at 05:26 PM.

03-13-2015, 05:10 PM	#30
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,115	Re: Parting a 72 chevy C20 now Randy- I noticed the sway bar is gone. Are the frame brackets still there by chance? Thanks. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

03-13-2015, 05:26 PM	#31
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 now Scott, they are but I need them for a setup I have out there, sorry __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-13-2015, 06:02 PM	#32
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting a 72 chevy C20 now Thanks Randy, I will take the doors if they are available yet. How much for both fenders and the tailgate and aux tank wiring switch, and valve setup? I will think on the bed and cab. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

03-13-2015, 06:07 PM	#33
danny69 Registered User Join Date: Nov 2014 Location: Shawnee, OK Posts: 155	Re: Parting a 72 chevy C20 now Randy What are kinda shape are the seat belts in are they black. Danny

03-13-2015, 06:16 PM	#34
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 now Jud, I have a guy wanting the doors, he was asking about them last night. Front fenders are $150 for pair, tailgate is $150. let me see if i can get the aux gas stuff off Danny, I have one guy ahead of you on belts Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-13-2015, 07:32 PM	#35
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: Parting a 72 chevy C20 now Randy, would like to get that trim...but if you won't ship, that's fine. Just give me a total when you get the chance to pull the parts. Please include the screws also. Thanks Mike.

03-13-2015, 07:39 PM	#36
w00dst0ck Registered User Join Date: Jul 2013 Location: Austin, Texas Posts: 349	Re: Parting a 72 chevy C20 now Factory filler neck? Need the metal part that goes through the gasket. Will take the cap too if you have it.

03-13-2015, 07:46 PM	#37
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 now Mike, the rear taillight bezels are beat up pretty bad. I won't start parting this truck till next week Woodstock, I'll see if its any good when I get it pulled Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-13-2015, 07:53 PM	#38
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 now rlk, here is a turbo 400 setup, I have to get the tranny bracket off another truck, the 2nd pic is what I have to take off yet. $30 plus shipping for the full setup up Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-13-2015, 08:03 PM	#39
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,186	Re: Parting a 72 chevy C20 now Randy, no problem on the tail light bezels, I'll take them anyways. Reason being they're going on a truck I'm putting up for sale, just need something to "fill the holes". Make sense? Thanks Mike.

03-13-2015, 08:46 PM	#41
gs1969 Registered User Join Date: Jun 2007 Location: Leavenworth Posts: 72	Re: Parting a 72 chevy C20 now Randy, Still on for Sunday? Early afternoon? Gary



Register or Log In To remove these advertisements.

03-13-2015, 09:18 PM	#42
Ugly 61 Registered User Join Date: Jan 2015 Location: Clyde KS Posts: 91	Re: Parting a 72 chevy C20 now Randy How much for the wheels and tires?? Ugly 61

03-13-2015, 09:28 PM	#43
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 now Mike, when I get it all parted I will get some pics and price Woodstock, I will get with you Gary, I will be home by 2:00 for sure Sun Gary, they are not a matched set, I think there is 3 that is alike Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-13-2015, 09:35 PM	#44
72 blue Registered User Join Date: Apr 2014 Location: Pell City, AL Posts: 86	Re: Parting a 72 chevy C20 now Randy, how about the fuel line from pump to carb, looking for a factory metal one... Also how about a good right side window regulator.....looking for some real clean pit free door out side handels .Randy, I wanted you to know I found that little bracket for the power steering hoses from my last order ! Thank you so much Randy, my bumper showed up tonight and I am very happy ! You have been a great asset to my project. Thanks Rick jackson

03-13-2015, 09:59 PM	#45
70 stepside Registered User Join Date: Feb 2013 Location: Phoenix,Az Posts: 47	Re: Parting a 72 chevy C20 now Randy do you have a 1970-72 c10 sbc 3 groove crank pulley swp with a 2 groove water pump pulley.

03-13-2015, 10:01 PM	#46
Ugly 61 Registered User Join Date: Jan 2015 Location: Clyde KS Posts: 91	Re: Parting a 72 chevy C20 now Randy The photo shows the left rear is different from the rest if they are 16" not 16.5 I'd still be interested. Ugly 61

03-13-2015, 10:16 PM	#47
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 now Rick, glad you found the bracket and are happy with bumper. I'll look on gas line and regulator 70 stepside, I should have that setup out there I will look, it will be Sun before I have time Gary, I will check size Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-13-2015, 10:28 PM	#48
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 699	Re: Parting a 72 chevy C20 now Hey Randy, since it has been 40+ years since I have seen the inside of a '72 bed with an auxiliary tank, does this truck have a metal cover over the filler neck similar to a blazer? If so I will take the metal cover for my build pending pictures. Thanks again! __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

03-13-2015, 10:29 PM	#49
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 699	Re: Parting a 72 chevy C20 now Hey Randy, since it has been 40+ years since I have seen the inside of a '72 bed with an auxiliary tank, does this truck have a metal cover over the filler neck similar to a blazer? If so I will take the metal cover for my build pending pictures. Thanks again! __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

03-14-2015, 09:28 AM	#50
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Parting a 72 chevy C20 now Paul, yes it does, I will see if its in good shape Sunday. Thanks man, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.