After searching, I still have a ball joint question

[Malamute]

Any preferred brand? I found Moog upper and lowers on Summit:

http://www.summitracing.com/parts/mo...del/c10-pickup

http://www.summitracing.com/parts/mo...del/c10-pickup

These are for factory A-arms on a '69 C10 and I will be installing ECE 2.5" drop spindles. I just want to make sure I'm ordering the right parts first.

Thanks.

[c10vortec]

I used the same MOOG ball joints on my winter project with 2.5" drop spindles. I also purchased MOOG springs, control arm shafts, and tie rods.
The lower ball joints pressed in nicely on my stock 72 arms. I bought them on recommendation from other build threads here.

I can't vouch for their durability because my truck is still sitting as a bare frame, but everything fit nicely and was stronger than stock

[Malamute]

Thanks.

[hugger6933]

Moog will do you better than fine. I trust in them. Jim