Fan shroud/Radiator mount Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**IronCanine** · 03-22-2015, 04:12 PM

Reinstalling my radiator and fan shroud. Please note part #7 in attached Assembly Manual pic. I am missing this component. I don't see how it works with the shroud clips in place. Is it an either/or situation? Since I have clips, would I not have that piece? Or has this part been lost somewhere along the way? Any guidance (especially with pics) appreciated. 1970 4WD.

Thanks...

Brad

hemi43 · 03-22-2015, 10:46 PM

I'll check mine tomorrow. BTW, which manual did you use to get that diagram. I'm looking for a body manual but not sure which one to get.
Dan

hemi43 · 03-22-2015, 10:59 PM

Here ya go !! Looks like mine is missing too. I have a feeling it's just a rubber seal to keep debris from getting sucked in by the fan. It looks thick in the drawing, but may have been made from thin rubber. IMO

**Steven B** · 03-23-2015, 11:03 AM

The only time I have seen part #7 was on a BB 2wd radiator shroud. Mine was on a Longhorn.

**IronCanine** · 03-23-2015, 03:10 PM

Thanks to you both...a picture is worth a thousand words as they say. Feel better about my set up now.

72K5CSTDarkOlive · 03-23-2015, 04:56 PM

I'll post a pic later tonight of the clip that I pulled off my shroud to see if that helps

03-22-2015, 04:12 PM	#1
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,746	Fan shroud/Radiator mount Question Reinstalling my radiator and fan shroud. Please note part #7 in attached Assembly Manual pic. I am missing this component. I don't see how it works with the shroud clips in place. Is it an either/or situation? Since I have clips, would I not have that piece? Or has this part been lost somewhere along the way? Any guidance (especially with pics) appreciated. 1970 4WD. Thanks... Brad Attached Images __________________ 1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

03-22-2015, 10:46 PM	#2
hemi43 Registered User Join Date: Mar 2015 Location: Ontario Canada Posts: 1,526	Re: Fan shroud/Radiator mount Question I'll check mine tomorrow. BTW, which manual did you use to get that diagram. I'm looking for a body manual but not sure which one to get. Dan

03-22-2015, 10:59 PM	#3
hemi43 Registered User Join Date: Mar 2015 Location: Ontario Canada Posts: 1,526	Re: Fan shroud/Radiator mount Question Here ya go !! Looks like mine is missing too. I have a feeling it's just a rubber seal to keep debris from getting sucked in by the fan. It looks thick in the drawing, but may have been made from thin rubber. IMO Attached Images

03-23-2015, 11:03 AM	#4
Steven B Senior Member Join Date: Jan 2000 Location: LHC, AZ Posts: 385	Re: Fan shroud/Radiator mount Question The only time I have seen part #7 was on a BB 2wd radiator shroud. Mine was on a Longhorn. __________________ 70 Jimmy 4x4 71 GMC 2500 Too bad stupidity isn't painful

03-23-2015, 03:10 PM	#5
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,746	Re: Fan shroud/Radiator mount Question Thanks to you both...a picture is worth a thousand words as they say. Feel better about my set up now. __________________ 1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

03-23-2015, 04:56 PM	#6
72K5CSTDarkOlive Registered User Join Date: Aug 2013 Location: Central Coast, CA Posts: 774	Re: Fan shroud/Radiator mount Question I'll post a pic later tonight of the clip that I pulled off my shroud to see if that helps __________________ My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.