Rust removal: anyone try this? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gipper · 04-07-2015, 07:10 PM

Quote:

Originally Posted by swamp rat

This is suppose to work well, buy a wading pool and fill it up, keep a cover on it. it takes a while to remove all the rust but its non toxic. then power wash it off and let it dry. There are video's on youtube about it.

I took a minute and found the video on molasses: https://www.youtube.com/watch?v=b-_z4tinnXk

**70STOVEBOLT** · 04-07-2015, 09:28 PM

I used a product called Oxysolv. I got it from Eastwood, but it may be available elsewhere. It removes rust and leaves behind a zinc phosphate coating.

pat english · 04-07-2015, 09:54 PM

check this link out.I did the molasses on some real old parts.It works.
http://www.jalopyjournal.com/forum/t...-build.772080/

04-07-2015, 09:28 PM	#27
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,414	Re: Rust removal: anyone try this? I used a product called Oxysolv. I got it from Eastwood, but it may be available elsewhere. It removes rust and leaves behind a zinc phosphate coating. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

04-07-2015, 09:54 PM	#28
pat english Registered User Join Date: Aug 2013 Location: la puente ca Posts: 358	Re: Rust removal: anyone try this? check this link out.I did the molasses on some real old parts.It works. http://www.jalopyjournal.com/forum/t...-build.772080/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.