|
05-05-2015, 09:03 PM
|
#1 |
|
Registered User
Join Date: Aug 2014
Location: Ligonier, PA
Posts: 37
|
alignment question.
Hello gentlemen,
I have a question on alignment of my 65 gmc. It has a pull to the right, which makes it handy when going around right hand bends other than that, it's a consistent left hand, elbow out the window cruising position. My question is what's the process of getting that straightened out. It's slightly lowered but the kicker is it has 285/50/20's on it. Your knowledge would be greatly appreciated by me and my left arm. Thank you for your time guys. |
|
|
|
05-06-2015, 06:33 AM
|
#2 |
|
Senior Member
 
Join Date: Jan 2011
Location: Hayes Va
Posts: 4,569
|
Re: alignment question.
First step is to make sure all the suspension components in the truck front and rear are in good shape. Second is a trip to a good alignment shop.
Jimmy
__________________
60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic |
|
|
|
|
05-06-2015, 07:16 AM
|
#3 |
|
Check The Champ, Demonstrator
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: alignment question.
Stock for 63-66
Camber(Curb) +0deg15' Caster (Curb) +2Deg27' Toe-in 3/16" total Make sure the tire is not worn to one side as well. Try a tire rotation to see if it changes anything first.
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
|
|
|
 |
| Bookmarks |
| Tags |
| alignment, steering, straight |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
