UT 1970 3/4 ton Dana 60 rear hubs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bluek5 · 03-28-2015, 01:23 PM

These have been sold.
I have 2 rear hubs for a 3/4 ton Dana 60. After purchasing a replacement rear end for my 72. I found out that the studs were 1/2" and I needed 9/16". I found some hubs off of a 71-72 rear end, and replaced them. I do not need these, hoping someone might have a use for them. They are probably only worth what it would cost to ship them.
Paul

**gmc 2500 4x4** · 03-29-2015, 05:49 AM

shipping to 14063 couldnt change the studs out? ps: im still needing dana 60 rear brake hardware if ya see anything your way. (12'')

bluek5 · 03-29-2015, 09:19 AM

Quote:

Originally Posted by gmc 2500 4x4

shipping to 14063 couldnt change the studs out? ps: im still needing dana 60 rear brake hardware if ya see anything your way. (12'')

You wanting both of them? I imagine I could have changed them out. It was probably cheaper for me just to buy good used ones. Did any of the brake hardware I sent you work.
Paul

**gmc 2500 4x4** · 03-29-2015, 06:21 PM

i'll take both if they are good shape. i rebuilt my hubs so these will g spares. i 4got i got brake stuff from ya lol. i havnt got that far, been workin at the front end. let me know price

72MARIO · 03-29-2015, 10:40 PM

I had to drill my hubs out to accept 9/16 studs. It can be done. .

bluek5 · 03-31-2015, 02:43 PM

Quote:

Originally Posted by gmc 2500 4x4

i'll take both if they are good shape. i rebuilt my hubs so these will g spares. i 4got i got brake stuff from ya lol. i havnt got that far, been workin at the front end. let me know price

Paul,
I haven't done much as far as checking out shipping. I can get one in a large flat rate box if I bulge the box some. They are around $18.00 a piece I think. If you want I can check on other shipping options. Let me know.
Paul

**gmc 2500 4x4** · 03-31-2015, 08:34 PM

find a box that will fit both.

afrance · 04-01-2015, 11:10 AM

Dang, somehow missed this post. If for some reason gmc2500 doesn't take both I'll take one. I've got a hub that the inner race spun and hogged out the hub. Thanks.

bluek5 · 04-01-2015, 01:01 PM

Quote:

Originally Posted by gmc 2500 4x4

find a box that will fit both.

I found a box for both and got an online quote. The quote was $50.00 they weigh around 38 lbs. box 14" x 14" x 8".
Paul

**gmc 2500 4x4** · 04-01-2015, 07:12 PM

sounds good. pm me your payment details

**gmc 2500 4x4** · 04-05-2015, 04:55 AM

pass them on to afrance. mine are 9/16 sorry

bluek5 · 04-05-2015, 05:07 AM

Quote:

Originally Posted by gmc 2500 4x4

pass them on to afrance. mine are 9/16 sorry

That was close, I almost shipped them Saturday.

**gmc 2500 4x4** · 04-05-2015, 05:14 AM

i was in shop last 2 days and checked mine, sorry again

bluek5 · 04-05-2015, 06:43 AM

Quote:

Originally Posted by gmc 2500 4x4

i was in shop last 2 days and checked mine, sorry again

No problem, afrance you are up if you want these.
Paul

afrance · 04-05-2015, 08:39 AM

I would love one of them. I'll PM you for details.

Thank you, Alan

hanly2 · 04-05-2015, 08:37 PM

Would these fit on a 1 ton with a eaton ho72?

bluek5 · 04-13-2015, 08:48 PM

Quote:

Originally Posted by hanly2

Would these fit on a 1 ton with a eaton ho72?

I would say no. A ho52 may work. You might want to ask in the discussion forum.
To The Top
I have one left.

bluek5 · 05-08-2015, 11:29 AM

To the top
Still have one left that needs a good home.

03-28-2015, 01:23 PM	#1
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	1970 3/4 ton Dana 60 rear hubs These have been sold. I have 2 rear hubs for a 3/4 ton Dana 60. After purchasing a replacement rear end for my 72. I found out that the studs were 1/2" and I needed 9/16". I found some hubs off of a 71-72 rear end, and replaced them. I do not need these, hoping someone might have a use for them. They are probably only worth what it would cost to ship them. Paul Attached Images Last edited by bluek5; 09-05-2015 at 11:26 AM.

03-29-2015, 05:49 AM	#2
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,958	Re: 1970 3/4 ton Dana 60 rear hubs shipping to 14063 couldnt change the studs out? ps: im still needing dana 60 rear brake hardware if ya see anything your way. (12'')

03-29-2015, 06:21 PM	#4
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,958	Re: 1970 3/4 ton Dana 60 rear hubs i'll take both if they are good shape. i rebuilt my hubs so these will g spares. i 4got i got brake stuff from ya lol. i havnt got that far, been workin at the front end. let me know price

03-29-2015, 10:40 PM	#5
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	Re: 1970 3/4 ton Dana 60 rear hubs I had to drill my hubs out to accept 9/16 studs. It can be done. . __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

03-31-2015, 08:34 PM	#7
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,958	Re: 1970 3/4 ton Dana 60 rear hubs find a box that will fit both.

04-01-2015, 11:10 AM	#8
afrance Registered User Join Date: Sep 2012 Location: Dallas, TX Posts: 19	Re: 1970 3/4 ton Dana 60 rear hubs Dang, somehow missed this post. If for some reason gmc2500 doesn't take both I'll take one. I've got a hub that the inner race spun and hogged out the hub. Thanks.

04-01-2015, 07:12 PM	#10
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,958	Re: 1970 3/4 ton Dana 60 rear hubs sounds good. pm me your payment details

04-05-2015, 04:55 AM	#11
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,958	Re: 1970 3/4 ton Dana 60 rear hubs pass them on to afrance. mine are 9/16 sorry

04-05-2015, 05:14 AM	#13
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,958	Re: 1970 3/4 ton Dana 60 rear hubs i was in shop last 2 days and checked mine, sorry again

04-05-2015, 08:39 AM	#15
afrance Registered User Join Date: Sep 2012 Location: Dallas, TX Posts: 19	Re: 1970 3/4 ton Dana 60 rear hubs I would love one of them. I'll PM you for details. Thank you, Alan

04-05-2015, 08:37 PM	#16
hanly2 Registered User Join Date: Mar 2014 Location: Gibbstown, NJ Posts: 176	Re: 1970 3/4 ton Dana 60 rear hubs Would these fit on a 1 ton with a eaton ho72?

05-08-2015, 11:29 AM	#18
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: 1970 3/4 ton Dana 60 rear hubs To the top Still have one left that needs a good home.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.