Show In Ga.worth The Trip?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67-72JUNKY · 02-05-2004, 01:02 AM

I LIVE 10.5 HOURS FROM THERE HAVE 3 OTHER GUYS GOING TO SHARE DRIVING . WHO IS SHOW & SWAP MEET AREA. COULD HAUL SMOETHING DOWN FROM MARYLAND. IF I GO...TY, DAVID

djracer · 02-05-2004, 02:32 AM

It should be an awesome swap meet I only have a 3.5 hour drive! We should have a board gathering on saturday and put faces with some names!

Longhorn Man · 02-05-2004, 08:17 AM

I would give my left nut to go to GA. but my agenda wouldn't be the same.

67-72JUNKY · 02-06-2004, 12:04 AM

TTT WHERE WILL BORD MEMBERS BE MEATING? AND WHAT TIME?

Kman · 02-06-2004, 08:12 AM

I'm going sunday

djracer · 02-08-2004, 12:48 PM

I had a blast! Butter and I got a good deal on allot of parts!!!!!!!!!!!!! Rain cut friday short but it was clear an beautiful on saturday just COLD as Hell! Tim Christian is an awesome guy he saved me tons of cash and was very knowledgable! Membership has its privlages!
I also have to thank David (King Parts) He helped me quite a bit also and then took a 30 minute drive to the truck to carry out all the loot! Traffic was pretty ruff!
I met PanelDeland nice guy also.
Tim was so busy we all tried to help with customer questions. He and David were stretched thin I don't think Tim even got a coke till lunch time on saturday! He could have used used about two more full time guys.

djracer · 02-09-2004, 03:25 AM

TTT

djracer · 02-09-2004, 09:50 AM

ttt

kingparts · 02-09-2004, 10:23 AM

It was good to meet everybody. Tim stayed Sunday night near Goodmark so he could restock. No problem on helping you with the parts trip. I know Tim will be in Raliegh, NC later this month with his wife.
David

butter · 02-09-2004, 10:41 AM

I had a great time and it was nice to meet some board members. Tim thanks for all the great deals and David thanks for some answering questions about parts. Tim is it (butter) or (butter-nut). Thanks Guys

butter · 02-09-2004, 05:49 PM

TTT

**Tim Christian** · 02-10-2004, 12:10 AM

Hey Guys, just got back today! I stopped at Goodmark this morning and repacked a empty trailer. I want to Thank all of you all for your bussiness but better yet it was great just for meeting you all and becoming Friends!!!!

02-05-2004, 01:02 AM	#1
67-72JUNKY Registered User Join Date: Nov 2003 Location: SALISBURY MARYLAND Posts: 61	Show In Ga.worth The Trip?? I LIVE 10.5 HOURS FROM THERE HAVE 3 OTHER GUYS GOING TO SHARE DRIVING . WHO IS SHOW & SWAP MEET AREA. COULD HAUL SMOETHING DOWN FROM MARYLAND. IF I GO...TY, DAVID Attached Images

02-05-2004, 02:32 AM	#2
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	It should be an awesome swap meet I only have a 3.5 hour drive! We should have a board gathering on saturday and put faces with some names! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-06-2004, 08:12 AM	#5
Kman Registered User Join Date: Sep 2002 Location: Melbourne,Florida Posts: 174	I'm going sunday __________________ New 89 chevy 1500 driver 72K20 rust bucket project stripped down to the frame engine rebuild started 71 Blazer - another procect

02-08-2004, 12:48 PM	#6
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Had a Blast I had a blast! Butter and I got a good deal on allot of parts!!!!!!!!!!!!! Rain cut friday short but it was clear an beautiful on saturday just COLD as Hell! Tim Christian is an awesome guy he saved me tons of cash and was very knowledgable! Membership has its privlages! I also have to thank David (King Parts) He helped me quite a bit also and then took a 30 minute drive to the truck to carry out all the loot! Traffic was pretty ruff! I met PanelDeland nice guy also. Tim was so busy we all tried to help with customer questions. He and David were stretched thin I don't think Tim even got a coke till lunch time on saturday! He could have used used about two more full time guys. __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-09-2004, 03:25 AM	#7
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	TTT __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-05-2004, 08:17 AM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	I would give my left nut to go to GA. but my agenda wouldn't be the same.

02-06-2004, 12:04 AM	#4
67-72JUNKY Registered User Join Date: Nov 2003 Location: SALISBURY MARYLAND Posts: 61	TTT WHERE WILL BORD MEMBERS BE MEATING? AND WHAT TIME?

02-09-2004, 09:50 AM	#8
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	ttt __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

02-09-2004, 10:23 AM	#9
kingparts Registered User Join Date: Nov 2000 Location: Clover, SC , US Posts: 971	It was good to meet everybody. Tim stayed Sunday night near Goodmark so he could restock. No problem on helping you with the parts trip. I know Tim will be in Raliegh, NC later this month with his wife. David __________________ 1970 Chevrolet Suburban 1967 Chevrolet C/10 Shortbed Stepside

02-09-2004, 10:41 AM	#10
butter Registered User Join Date: Jan 2000 Location: Orange Beach, Alabama Posts: 133	I had a great time and it was nice to meet some board members. Tim thanks for all the great deals and David thanks for some answering questions about parts. Tim is it (butter) or (butter-nut). Thanks Guys __________________ 71 cheyenne 402 th400 swb 71 camper special (PARTS TRUCK) 70 Stepside swb 350

02-09-2004, 05:49 PM	#11
butter Registered User Join Date: Jan 2000 Location: Orange Beach, Alabama Posts: 133	TTT __________________ 71 cheyenne 402 th400 swb 71 camper special (PARTS TRUCK) 70 Stepside swb 350

02-10-2004, 12:10 AM	#12
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Hey Guys, just got back today! I stopped at Goodmark this morning and repacked a empty trailer. I want to Thank all of you all for your bussiness but better yet it was great just for meeting you all and becoming Friends!!!! Last edited by Tim Christian; 02-10-2004 at 12:13 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.