![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Apr 2015
Location: peoria AZ
Posts: 8
|
1962 single to dual master cylinder
I'm currently running a single master cylinder in my 62 short/step and want to convert to dual, staying with manual brakes. My question is what do I do about the line going to the clutch? Do I buy a single mc just for the clutch? Also, is there a dual mc I can buy that will bolt right up directly to the factory holes on the firewall left by the stock single mc? I am new to this site and any help would be appreciated. Thanks!
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2013
Location: Las Vegas, NV
Posts: 1,853
|
Re: 1962 single to dual master cylinder
See Captainfab adapter.
http://www.67-72chevytrucks.com/vboa...isplay.php?f=7
__________________
1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081 |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2013
Location: Las Vegas, NV
Posts: 1,853
|
Re: 1962 single to dual master cylinder
Picture.
__________________
1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081 |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Apr 2015
Location: peoria AZ
Posts: 8
|
Re: 1962 single to dual master cylinder
I didn't plan on using a booster and was wondering if there is a dual mc that would bolt directly in place of the old single mc.
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jul 2011
Location: Tacoma, WA
Posts: 176
|
Re: 1962 single to dual master cylinder
So is this the same master cylinder you have? I was planning on replacing it as well.
(sorry pic is really dark)
__________________
1965 C10 Longbed Stepside 1969 Chevelle Malibu 1962 C20 Fleetside - Build Thread (Sold before I could finish) |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Apr 2015
Location: peoria AZ
Posts: 8
|
Re: 1962 single to dual master cylinder
Yes, I have that same one. Also not sure what to do about the clutch line.
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jan 2011
Location: Tulsa, OK
Posts: 32
|
Re: 1962 single to dual master cylinder
Sorry, I guess the links are not working. Just go to the photobucket link in the signature and look for the Doubler pics.
Jim
__________________
I like More's Law 'If more is better, then too much is just right.' http://s1238.photobucket.com/albums/...20chevy%20k10/ 1971 Chevelle - sbc 350 TH350 1961 K10 - sbc 400 4 spd M/T short stepside |
![]() |
![]() |
![]() |
#9 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,247
|
Re: 1962 single to dual master cylinder
I do not know of a dual reservoir master cylinder that will bolt up. I do make a manual brake version of the kit that has provisions for a brake booster and the hydraulic clutch. It is basically just like this one in post #29, except it has the provisions for the hydraulic clutch.
http://www.67-72chevytrucks.com/vboa...=357542&page=2
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 05-20-2015 at 12:53 AM. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|