|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-20-2015, 09:20 PM
|
#1 |
|
made in america
Join Date: May 2010
Location: baton rouge la
Posts: 653
|
out with the old in with the..... older?
well boys i sold my old 66. her name was darlene. she had a 305 v8, and a t5 transmission, all kinda new stuff and some sweet exhaust. lowered 3/5. but i needed some concrete poured at the house. let her go for a llittle less than i wanted to but its all working out perfectly. got my concrete ready to go this saturday and bought a replacement truck yesterday. its a 64, longbed. three on the tree, 283 powerpack. almost all original. pictures to follow
sold truck  older truck   
__________________
2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree  2004 corvette- lowered, borla, tuned. slow  my old girl 1966 c10- 305v8, t-5 sold |
|
|
|
05-20-2015, 09:22 PM
|
#2 |
|
made in america
Join Date: May 2010
Location: baton rouge la
Posts: 653
|
Re: out with the old in with the..... older?
obviously the basics will be first. tune up, oil change, brakes, belts, tires, then 3/5 drop with sway bars and red frigen wheels!!!!
__________________
2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold |
|
|
|
|
05-20-2015, 09:25 PM
|
#3 |
|
But Found Her 25yrs Later!
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,530
|
Re: out with the old in with the..... older?
Are you going to leave the natural patina?
__________________
I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035 |
|
|
|
|
05-20-2015, 09:28 PM
|
#4 |
|
Registered User
 
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: out with the old in with the..... older?
What ya got for a drive train? Nice truck.
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
|
|
|
|
05-20-2015, 09:31 PM
|
#5 | |
|
Registered User
Join Date: Jul 2010
Location: los angeles,ca
Posts: 3,617
|
Quote:
Posted via Mobile Device |
|
|
|
|
|
05-20-2015, 09:44 PM
|
#6 |
|
made in america
Join Date: May 2010
Location: baton rouge la
Posts: 653
|
Re: out with the old in with the..... older?
the body will not be painted. i love gods paint job. lol. its a 283 powerpack and a 3 speed on the column. i have a 283 in the garage that i plan to swap in once i rebuild it. i would like to build that one up just a bit, cam, aluminum heads or powerpack heads, and man the 3 dueces setup would be way cool. but first im going to make it low. and drive it.
__________________
2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold |
|
|
|
|
05-21-2015, 08:37 AM
|
#7 |
|
Registered User
Join Date: Feb 2014
Location: Stephens City, VA
Posts: 326
|
Re: out with the old in with the..... older?
Congrats! Really like that patina "Gods Paint Job" with red wheels... nice find great plan.
Pappyx4!
__________________
1962 Chevy C-10 Stepside 383 Stroker, Turbo 400 1966 Chevy C-10 Stepside 250 6Cyl, 3OTT- Daily Driver John 3:16 |
|
|
|
|
05-21-2015, 09:22 AM
|
#8 |
|
Registered User
Join Date: Aug 2011
Location: Montrose, CO
Posts: 972
|
Re: out with the old in with the..... older?
Both of those trucks are/were nice. Good luck with the build.
|
|
|
|
|
05-21-2015, 09:32 AM
|
#9 |
|
Registered User
Join Date: Dec 2013
Location: Dallas Ga
Posts: 308
|
Re: out with the old in with the..... older?
I like the wheels on DARLENE, but that is a good looking 64. Nice score!!! Looking forward to your mods
|
|
|
|
|
05-21-2015, 09:34 PM
|
#10 | |
|
Registered User
Join Date: Oct 2012
Location: Eldon, MO
Posts: 1,753
|
Re: out with the old in with the..... older?
Quote:
 I like it, looks a lot like the one I picked up not too long ago. |
|
|
|
|
|
05-22-2015, 10:07 AM
|
#11 | |
|
Registered User
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: out with the old in with the..... older?
Quote:
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
|
|
|
|
|
05-22-2015, 12:15 PM
|
#12 |
|
made in america
Join Date: May 2010
Location: baton rouge la
Posts: 653
|
They look very close to Ford wheels but they are actually early 70s Chevy wheels. A friend of mine has dibs on them. This weekend my concrete is being poured maybe next weekend I will get to clean her up.
Posted via Mobile Device |
|
|
|
|
05-22-2015, 12:34 PM
|
#13 |
|
But Found Her 25yrs Later!
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,530
|
Re: out with the old in with the..... older?
I guess I was so drawn to the natural patina that I didn't notice the F%&# hubcaps.
__________________
I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035 |
|
|
|
|
05-22-2015, 03:04 PM
|
#14 |
|
made in america
Join Date: May 2010
Location: baton rouge la
Posts: 653
|
Re: out with the old in with the..... older?
Just saw a 90s ford f250 with them on it. I need to get them off fast!!! Lol
Posted via Mobile Device |
|
|
|
|
05-26-2015, 10:27 PM
|
#15 |
|
made in america
Join Date: May 2010
Location: baton rouge la
Posts: 653
|
Re: out with the old in with the..... older?
well i got her home and i must say this is a damn awesome truck!! no rot in the floors or rockers even has the factory radio!!! and all the nobs!!!
pictures!!!     truck has been in baton rouge its whole life      
__________________
2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold |
|
|
|
|
05-26-2015, 10:35 PM
|
#16 |
|
made in america
Join Date: May 2010
Location: baton rouge la
Posts: 653
|
Re: out with the old in with the..... older?
this truck is insanely original. i only sprayed it off just a smidgen for my own look. tomorrow if i get a chance i will give her a good scrub a dub dub. next on the to do list is check fuel lines and fuel tank. it will get a rear tank before it runs down the road. the brake hoses are all shot so they will be replaced. and i have a hei distributor that needs springs and a coil/cap. the hot rod power tour ends in gonzales this year. i hope to cruise this truck there.
__________________
2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold |
|
|
|
|
05-26-2015, 11:01 PM
|
#17 |
|
Registered User
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
|
Re: out with the old in with the..... older?
That is a good looking truck. Hard to find all original untouched trucks. Heck I'd give it a good pressure washing..get it running and drive it.
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw |
|
|
|
|
05-26-2015, 11:17 PM
|
#18 |
|
Registered User
Join Date: Dec 2011
Location: Donaldsonville, La.
Posts: 1,024
|
Re: out with the old in with the..... older?
Nice truck you found, Looks like a really good start.
|
|
|
|
|
05-27-2015, 07:53 PM
|
#19 |
|
made in america
Join Date: May 2010
Location: baton rouge la
Posts: 653
|
Re: out with the old in with the..... older?
after a good pressure washing
  i toyed with the idea of putting a battery in it today and just seeing if it would turn over. the column shifter is very very stiff. any ideas on how i need to go about fixing that? ive never had a truck with an intact column shift
__________________
2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold |
|
|
|
|
05-27-2015, 08:08 PM
|
#20 |
|
made in america
Join Date: May 2010
Location: baton rouge la
Posts: 653
|
Re: out with the old in with the..... older?
__________________
2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold |
|
|
|
|
06-14-2015, 06:47 PM
|
#21 |
|
made in america
Join Date: May 2010
Location: baton rouge la
Posts: 653
|
Re: out with the old in with the..... older?
well i got the column shifter working. just had to use a good bit of wd40 and work it back and forth a few times. shifts like a dream now. also installed a battery and tested out a few of the electronics. headlights work, interior lights work, all idiot lights work. turn signals are good to go but i have no tail lights. thought that was strange. also did a tune up and hei swap. some time this week i am going to try to give it an oil change and try to start her up. maybe it will bust right off. also got the CPP 3/5 kit coming in the mail. all new springs, shocks, sway bars, and trac bar.
__________________
2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold |
|
|
|
|
06-14-2015, 06:57 PM
|
#22 |
|
made in america
Join Date: May 2010
Location: baton rouge la
Posts: 653
|
Re: out with the old in with the..... older?
  
__________________
2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold |
|
|
|
|
07-02-2015, 09:20 PM
|
#23 |
|
made in america
Join Date: May 2010
Location: baton rouge la
Posts: 653
|
Re: out with the old in with the..... older?
got it to start the other day. just filled the bowls on the carb hoping it would be enough to pull some fuel through the fuel pump. unfortunately my fuel pump is bad. easy fix. going to finish up on that tomorrow. in the mean time i got all my cpp stuff in the mail. so far i have only done the front. also changed the wheels to some that i had off another 64. tomorrow is a day off so i plan to do some thrashing and then some driving.
here is a little teaser shot. 
__________________
2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold |
|
|
|
|
07-02-2015, 09:21 PM
|
#24 |
|
made in america
Join Date: May 2010
Location: baton rouge la
Posts: 653
|
Re: out with the old in with the..... older?
3 inches lower with 275/60r15s in the front.
__________________
2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold |
|
|
|
|
07-03-2015, 09:46 AM
|
#25 |
|
Registered User
Join Date: Nov 2008
Location: Lacombe, LA
Posts: 2,772
|
Re: out with the old in with the..... older?
Whenever I see project trucks being towed, I can't help but wonder how many drivers wish it were theirs........
__________________
http://s1299.photobucket.com/user/jb...23904108567829 |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
