The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-31-2015, 06:52 PM   #1
Chris Coufal
Registered User
 
Join Date: Aug 2014
Location: Austin, TX.
Posts: 138
Aftermarket Air Pics

Can you guys post some pics of your aftermarket air kits and how they are mounted under the dash? I'm needing some glovebox pics for spacial planning. Trying to mount my LS computer somewhere under the dash and I'd rather not have to move it in a few years when I add a/c. So far the only good place I've found to mount it is on the driver side where the fuse block is located.....thus causing to relocate it when I put a new harness in. This is fine, however it will just look odd hanging below the dash like that. Plus I will have to remove the column if it ever needed to be taken out. Ideas...thoughts?
Chris Coufal is offline   Reply With Quote
Old 06-01-2015, 08:36 AM   #2
nsb29
Senior Member
 
nsb29's Avatar
 
Join Date: Feb 2014
Location: new smyrna beach fl / 29 palms cal
Posts: 1,727
Re: Aftermarket Air Pics

I see them mounted under or behind the seat
nsb29 is offline   Reply With Quote
Old 06-01-2015, 09:47 AM   #3
LT1 Burb
Registered User
 
LT1 Burb's Avatar
 
Join Date: Sep 2010
Location: Winchester Oregon, formerly Vancouver BC
Posts: 2,949
Re: Aftermarket Air Pics

I put my computer under the passenger seat, just have to splice and extend a 100 wires.
LT1 Burb is offline   Reply With Quote
Old 06-01-2015, 02:45 PM   #4
par4tom
Registered User
 
Join Date: Nov 2012
Location: Kingsburg CA
Posts: 581
Re: Aftermarket Air Pics

I just installed a Vintage Air in my 61...there is not enough room there behind the glovebox...either behind the unit and bolted to the cowl vent or in front of the unit as the Vintage Air unit makes you replace your existing glovebox.

I agree with one of the other posters, move it under the passenger seat and out of the way..
Tom
__________________
My Build Thread
http://67-72chevytrucks.com/vboard/s...d.php?t=705185
How to Get Audiophile Sound in 60-66 Trucks
http://67-72chevytrucks.com/vboard/s...=1#post7236896
Building Your Own Speaker Kick Pods
http://http://67-72chevytrucks.com/vboard/showthread.php?t=730495
par4tom is offline   Reply With Quote
Old 06-01-2015, 09:47 PM   #5
Chris Coufal
Registered User
 
Join Date: Aug 2014
Location: Austin, TX.
Posts: 138
Re: Aftermarket Air Pics

I'd like to mount it under the seat.....but I'm not going through that headache right now of lengthening all 100 wires. I need to get it fired up and running first and one wrong soldered wire would result in weeks of aggravation and scratching my head. I think I've found a great place under the dash between the radio and the steering column.
Chris Coufal is offline   Reply With Quote
Old 06-02-2015, 08:36 AM   #6
brokenspoke
Registered User
 
brokenspoke's Avatar
 
Join Date: Jul 2011
Location: Anderson, Texas
Posts: 535
Re: Aftermarket Air Pics

I cant figure out how to share one of my post....search (Vintage A/C dash)
brokenspoke is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:32 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com