6 lug 4wd 'vette style rallys....are they rare? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BIGBLU 72 · 08-31-2009, 04:21 PM

I have a set of 6 lug 'vette style rally wheels that fit 4wd trucks? i have them on a 68 2wd and every where i got ppl ask me where i got them or if they can buy them? i have never seen any like them around eastern Ky, so are they common and just not around eastern Ky or are they pretty rare?

Tx Firefighter · 08-31-2009, 04:25 PM

Vette type of rallys in both truck 5 lug and 6 lug are strictly aftermarket. They aren't real common to see, but you can buy them from lots of places. Summit keeps them in all sizes in stock at all times.

BIGBLU 72 · 08-31-2009, 10:57 PM

thanks! now i have an answer for everyone that wants to buy them

prostreetC-10 · 08-31-2009, 11:21 PM

Let's just say I get asked that same question all the time!

ChevLoRay · 08-31-2009, 11:27 PM

Wheel Vintiques....

prostreetC-10 · 08-31-2009, 11:39 PM

........and what's so darn cool is that you can get them in ANY offset you want. Nice when you are trying to get a 14" wide wheel back there. ;o)

Jim_PA · 09-01-2009, 12:21 AM

They make truck wheels in all shapes and sizes too, and I think they look a lot better.

**special-K** · 09-01-2009, 08:07 AM

They aren`t rare because as many as needed are still being made.Many people are not real resourceful.They just go with what`s placed in front of them.They need others like you to point them in the right direction.

BIGBLU 72 · 09-01-2009, 01:19 PM

what centre caps fit the 6 lug wheels? where can i find them?

LOW DOUGH · 09-01-2009, 03:26 PM

Quote:

Originally Posted by Jim_PA

They make truck wheels in all shapes and sizes too, and I think they look a lot better.

I want square ones

Longhorn Man · 09-01-2009, 03:52 PM

Quote:

Originally Posted by BIGBLU 72

what centre caps fit the 6 lug wheels? where can i find them?

they have a few styles... I'd contact the companies that sell the wheels.

**special-K** · 09-01-2009, 09:51 PM

Yeah,whatever caps fit the 5-lug car or truck pattern work on the 6-lugs.

NYC-10 · 09-01-2009, 10:08 PM

15x10

bigbadchev72 · 09-01-2009, 11:08 PM

**70cst** · 09-01-2009, 11:15 PM

I will always have a soft spot for 'vette' style rallys wheels. They just look right on our trucks!

prostreetC-10 · 09-02-2009, 12:27 AM

they all take the same center cap. I will say this though....I think I stumbled on the greatest find and it's super subtle. My caps are actually shorter than the factory ones. The only think I don't like about the original ones is that the stock center is too tall. I found a company that makes a slightly shorter center cap and it looks really nice. You almost have to have them side by side to see the diff. Here is a pic and it acutally makes the wheel look deeper.

69nova · 09-02-2009, 03:50 AM

Yeah both 5 and 6 lug rally wheels are quite common in my area. You can also, instead of buying the short cone type, cut them yourself. I cut half of the cone off and redrilled the holes because most of them came casted with two sets of mounting shanks if you look inside the cone itself. You can pick up the cone type dirt cheap around here and in about an hour you can shorten them. I have the flat centers as well but people would steal those quite often (3 sets stolen over 20 yrs) but they don't really bother the cone type so I run those. With the flat center type (so called disc brake centers) you may have to do a little work on the spindle dust cover to get them to fit the front (hate to say it but a hammer does the trick if you take them off and don't get carried away).

Matty Wagz · 11-28-2009, 10:48 AM

have a 66 1/2 ton 2wd, what frontspace?? are you running to keep clear of the bed on the wider wheels from Summit or Wheel vintiques?
thanks,
Matty Wagz

50bomb · 03-26-2011, 09:07 PM

Quote:

Originally Posted by LOW DOUGH

I want square ones

hawnprostreetc10 · 06-03-2015, 02:24 PM

Wants know what backspacing for this 15x 14 will tuck in bed with out cut rearend only Cut the bed

08-31-2009, 04:21 PM	#1
BIGBLU 72 Registered User Join Date: Dec 2008 Location: Ashland, KY Posts: 700	6 lug 4wd 'vette style rallys....are they rare? I have a set of 6 lug 'vette style rally wheels that fit 4wd trucks? i have them on a 68 2wd and every where i got ppl ask me where i got them or if they can buy them? i have never seen any like them around eastern Ky, so are they common and just not around eastern Ky or are they pretty rare? __________________ 68 C10 LWB 2/4 drop 406/th400/3.73posi 04 Silverado SS LQ9 6.0/4L65e/4.11posi AWD

08-31-2009, 04:25 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: 6 lug 4wd 'vette style rallys....are they rare? Vette type of rallys in both truck 5 lug and 6 lug are strictly aftermarket. They aren't real common to see, but you can buy them from lots of places. Summit keeps them in all sizes in stock at all times. __________________ I'm on the Instagram- @Gearhead_Kevin

08-31-2009, 10:57 PM	#3
BIGBLU 72 Registered User Join Date: Dec 2008 Location: Ashland, KY Posts: 700	Re: 6 lug 4wd 'vette style rallys....are they rare? thanks! now i have an answer for everyone that wants to buy them __________________ 68 C10 LWB 2/4 drop 406/th400/3.73posi 04 Silverado SS LQ9 6.0/4L65e/4.11posi AWD

08-31-2009, 11:21 PM	#4
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: 6 lug 4wd 'vette style rallys....are they rare? Let's just say I get asked that same question all the time! Attached Images __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!

08-31-2009, 11:27 PM	#5
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: 6 lug 4wd 'vette style rallys....are they rare? Wheel Vintiques.... Attached Images __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

08-31-2009, 11:39 PM	#6
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: 6 lug 4wd 'vette style rallys....are they rare? ........and what's so darn cool is that you can get them in ANY offset you want. Nice when you are trying to get a 14" wide wheel back there. ;o) __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!

09-01-2009, 12:21 AM	#7
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: 6 lug 4wd 'vette style rallys....are they rare? They make truck wheels in all shapes and sizes too, and I think they look a lot better.

09-01-2009, 08:07 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 6 lug 4wd 'vette style rallys....are they rare? They aren`t rare because as many as needed are still being made.Many people are not real resourceful.They just go with what`s placed in front of them.They need others like you to point them in the right direction. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-01-2009, 01:19 PM	#9
BIGBLU 72 Registered User Join Date: Dec 2008 Location: Ashland, KY Posts: 700	Re: 6 lug 4wd 'vette style rallys....are they rare? what centre caps fit the 6 lug wheels? where can i find them? __________________ 68 C10 LWB 2/4 drop 406/th400/3.73posi 04 Silverado SS LQ9 6.0/4L65e/4.11posi AWD

09-01-2009, 09:51 PM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 6 lug 4wd 'vette style rallys....are they rare? Yeah,whatever caps fit the 5-lug car or truck pattern work on the 6-lugs. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-01-2009, 10:08 PM	#13
NYC-10 screamin eagle Join Date: Oct 2007 Location: westbury ny Posts: 237	Re: 6 lug 4wd 'vette style rallys....are they rare? 15x10 Attached Images __________________ SCREAMIN EAGLE

09-01-2009, 11:08 PM	#14
bigbadchev72 People know me Join Date: Jun 2007 Location: Hermiston, oregon Posts: 840	Re: 6 lug 4wd 'vette style rallys....are they rare? __________________ 1972 k/5 blazer CST 4X4 Crate 350, th350/205, dana44with trac-loc/14 bolt with detroit locker, 4 wheel discs 4.56s, 8" suspension lift using 73-87springs, 1" zerorate custom front crossmember, HAD CV drivelines and driveshaft e-brake, full cage, PRP seats, Full autometer gauges, 38x14.5x16 Toyo M/Ts, 16x10 Polished aluminum rockcrusher wheels 1967 longbox 4x4, Strong 400/400/208, 44/12bolt 4.10s, 6" lift, 35" Toyo M/Ts on corvette rally wheels

09-01-2009, 11:15 PM	#15
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: 6 lug 4wd 'vette style rallys....are they rare? I will always have a soft spot for 'vette' style rallys wheels. They just look right on our trucks! __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

09-02-2009, 12:27 AM	#16
prostreetC-10 My Carbon Footprint Join Date: Oct 2008 Location: Orygun Posts: 5,527	Re: 6 lug 4wd 'vette style rallys....are they rare? they all take the same center cap. I will say this though....I think I stumbled on the greatest find and it's super subtle. My caps are actually shorter than the factory ones. The only think I don't like about the original ones is that the stock center is too tall. I found a company that makes a slightly shorter center cap and it looks really nice. You almost have to have them side by side to see the diff. Here is a pic and it acutally makes the wheel look deeper. Attached Images __________________ A quick "pedalfest" *Still getting loose (carb test)* 496 Initial fire up video!

09-02-2009, 03:50 AM	#17
69nova Registered User Join Date: Jan 2009 Location: virginia Posts: 49	Re: 6 lug 4wd 'vette style rallys....are they rare? Yeah both 5 and 6 lug rally wheels are quite common in my area. You can also, instead of buying the short cone type, cut them yourself. I cut half of the cone off and redrilled the holes because most of them came casted with two sets of mounting shanks if you look inside the cone itself. You can pick up the cone type dirt cheap around here and in about an hour you can shorten them. I have the flat centers as well but people would steal those quite often (3 sets stolen over 20 yrs) but they don't really bother the cone type so I run those. With the flat center type (so called disc brake centers) you may have to do a little work on the spindle dust cover to get them to fit the front (hate to say it but a hammer does the trick if you take them off and don't get carried away).



Register or Log In To remove these advertisements.

11-28-2009, 10:48 AM	#18
Matty Wagz Registered User Join Date: Nov 2009 Location: Lititz, PA 17543 Posts: 182	Re: 6 lug 4wd 'vette style rallys....are they rare? have a 66 1/2 ton 2wd, what frontspace?? are you running to keep clear of the bed on the wider wheels from Summit or Wheel vintiques? thanks, Matty Wagz

06-03-2015, 02:24 PM	#20
hawnprostreetc10 Registered User Join Date: Jun 2015 Location: las vegas ,nevada Posts: 4	Re: 6 lug 4wd 'vette style rallys....are they rare? Wants know what backspacing for this 15x 14 will tuck in bed with out cut rearend only Cut the bed

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.