dynomax ceramic coated headers 4sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lost wages · 02-07-2004, 05:58 AM

these are new but may have a few scratches from installing thm, i bought the wrong ones, these are for a chevelle but i wanted the chevelle shorty headers. they fit in the truck ok. i paid 230 for these and will take 190 shipped to your door.

**JDL** · 02-07-2004, 12:30 PM

Do you have the part # Just woundering what size they are

lost wages · 02-07-2004, 04:12 PM

WLK-86001 from summit racing

70 Jimmy · 02-07-2004, 09:50 PM

Curious about why you don't want them. I've got the Chevelle for my BBC and they seem to fit fine and tuck very well.

cochran63 · 02-08-2004, 01:45 AM

can you send me some close up pictures of the scratces? I am interested

**JDL** · 02-08-2004, 02:17 AM

I was looking for some a littel bigger Thanks.

lost wages · 02-08-2004, 03:23 AM

i can get pics in a week or so after i get my new headers on and these off, i dont know if they are scratched but if youve ever installed headers you will likely scratch them. when i get them off ill check closer to see any damage. I dont want them because the doughnut flange lays on the ground when the truck ia lowered, i dont want to drag it when i have the bags dumped.

lost wages · 02-08-2004, 04:22 PM

sale pending

lost wages · 02-09-2004, 11:42 AM

ok, these are still for sale.

lost wages · 02-10-2004, 04:19 AM

got them removed tonight, need these gone, anyone go to chevelle boards? thanks

03glide · 02-10-2004, 04:59 PM

Are there any fitment problems in the truck or are they just NOT what you wanted? Are the first pics(blue frame) and the last pics(silver frame) the same truck. I just want to make sure I wouldn't have any issues installing these in my truck.

krazy_texan · 02-10-2004, 06:05 PM

what size are the flanges on the ends i am interested if you could wait for 2 weeks or a trade of parts let me know i need a new set for my GMC

Smooth68 · 02-10-2004, 06:12 PM

E03glide - Earlier post from lost wages....

Quote:

Originally posted by lost wages
I dont want them because the doughnut flange lays on the ground when the truck ia lowered, i dont want to drag it when i have the bags dumped.

03glide · 02-10-2004, 06:43 PM

I guess I overlooked that. Thanks

lost wages · 02-11-2004, 03:56 AM

they fit ok, bout like most headers they are tight, i had them in the 6 position so i am not sure how well they will fit farther forward, might need to shave a little off the frame in one spot, nothing major. Im not sure how thick the flanges are, ill go look.

lost wages · 02-11-2004, 04:05 AM

the blue frame and the silver are the same one, i had a change of plans in the middle of the build up of this truck, The flanges are 3/8 thick. If you buy these and are not happy with fit i will refund the price you paid. I just ask that you pay shipping to return them. thanks.

03glide · 02-12-2004, 02:23 PM

pm sent

03glide · 02-13-2004, 06:22 PM

did you get the pm

02-07-2004, 05:58 AM	#1
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	dynomax ceramic coated headers 4sale these are new but may have a few scratches from installing thm, i bought the wrong ones, these are for a chevelle but i wanted the chevelle shorty headers. they fit in the truck ok. i paid 230 for these and will take 190 shipped to your door. Attached Images

02-07-2004, 12:30 PM	#2
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,845	Do you have the part # Just woundering what size they are __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

02-07-2004, 09:50 PM	#4
70 Jimmy aka Crusher, Crushergmc Join Date: Mar 2000 Location: Oregon Posts: 1,834	Curious about why you don't want them. I've got the Chevelle for my BBC and they seem to fit fine and tuck very well. __________________ "KEEP IT DOWN!" 70 Jimmy 454 2wd 56 GMC Big Window "It's funny till someone gets hurt, then it's freakin' hilarious"

02-08-2004, 01:45 AM	#5
cochran63 Registered User Join Date: Jan 2004 Location: Oklahoma Posts: 1,057	can you send me some close up pictures of the scratces? I am interested __________________ Youth soon passes away, but immaturity can last a life time.

02-08-2004, 02:17 AM	#6
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,845	I was looking for some a littel bigger Thanks. __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

02-07-2004, 04:12 PM	#3
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	WLK-86001 from summit racing

02-08-2004, 03:23 AM	#7
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	i can get pics in a week or so after i get my new headers on and these off, i dont know if they are scratched but if youve ever installed headers you will likely scratch them. when i get them off ill check closer to see any damage. I dont want them because the doughnut flange lays on the ground when the truck ia lowered, i dont want to drag it when i have the bags dumped.

02-08-2004, 04:22 PM	#8
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	sale pending Attached Images

02-09-2004, 11:42 AM	#9
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	ok, these are still for sale.

02-10-2004, 04:19 AM	#10
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	got them removed tonight, need these gone, anyone go to chevelle boards? thanks

02-10-2004, 04:59 PM	#11
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	Are there any fitment problems in the truck or are they just NOT what you wanted? Are the first pics(blue frame) and the last pics(silver frame) the same truck. I just want to make sure I wouldn't have any issues installing these in my truck.

02-10-2004, 06:05 PM	#12
krazy_texan Registered User Join Date: Oct 2002 Location: West Des Moines, Ia Posts: 3,233	what size are the flanges on the ends i am interested if you could wait for 2 weeks or a trade of parts let me know i need a new set for my GMC __________________ Krazy Texan My Trucks are made with Wrenches not Chop Sticks 1967 GMC 3/4 ton "Johnny Cash" 1990 v1500 suburban 1967 Ford f100 Swb 4x4 "green bean" GOD BLESS JESUS, JOHN WAYNE, AND THE ALAMO

02-10-2004, 06:43 PM	#14
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	I guess I overlooked that. Thanks

02-11-2004, 03:56 AM	#15
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	they fit ok, bout like most headers they are tight, i had them in the 6 position so i am not sure how well they will fit farther forward, might need to shave a little off the frame in one spot, nothing major. Im not sure how thick the flanges are, ill go look.

02-11-2004, 04:05 AM	#16
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	the blue frame and the silver are the same one, i had a change of plans in the middle of the build up of this truck, The flanges are 3/8 thick. If you buy these and are not happy with fit i will refund the price you paid. I just ask that you pay shipping to return them. thanks.



Register or Log In To remove these advertisements.

02-12-2004, 02:23 PM	#17
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	pm sent

02-13-2004, 06:22 PM	#18
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	did you get the pm

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.