Upcoming mod questions

[homemade87]

I don't think the injectors will fit the tbss intake . Not a problem , just cut the wires and solder the new injectors in or you can buy adapters . The adapter can get expensive since you need 8 . Fuel system should be fine for what you are doing .

Next thing is what year operating system do you have . If the throttle body is a 8 pin now it will not work with a 6 pin TB (tbss ) . You will have to use a Xlink controller to convert to it . Or you can use the existing TB and use a 4 bolt to a 3 bolt adapter and use what you have now if its a 3 bolt .

Cam and stall . You will get suggestions all over the place . Its mostly what you would like to have . I would call circle D and tell them what you would like to have . I would also call someone like Martin at tick performance and get a custom cam ground for your exact set up . It makes a huge difference . Cost the same also .